• 공업화학
• /
• 제16권2호
• /
• pp.187-193
• /
• 2005

광촉매 $TiO_2$박막은 titanium (IV) isopropoxide, 에탄올, HCl을 일정한 비율로 졸-겔방법에 의해 제작하였다. SEM에 의한 표면관찰에서는 $500^{\circ}C$에서 5회 반복해서 코팅하여 제작한 것이 우수했다. EDX에 의한 성분비는 spin코팅이 O : Ti의 atom%가 61 : 39로 dip코팅보다 우수했다. 그리고 박막제작의 온도에 따라서 anatase상에서 rutile상으로 결정구조가 변화되어 가는 것을 XRD측정으로 알았다. 제작한 $TiO_2$박막에 UV빔을 조사해서 얻은 TOC의 광분해효율이 1 h 이내에 20~65%를 나타내었고, 그 이후에는 서서히 감소하는 것을 확인했다.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2003년도 춘계학술발표회 초록집
• /
• pp.53-53
• /
• 2003

Plasma polymerized organic thin films were deposited on Si(100) glass and metal substrates using thiophene and ethylcyclohexane precursors by PECVD method. In order to compare electrochemical properties of the as-grown thin films, the effects of the RF plasma power in the range of 30~100 W. AFM showed that the polymer films with smooth surface and sharp interface could be grown under various deposition conditions. Impedance analyzer was utilized for the determination of I-V curve for leakage current density and C-V for dielectric constants, respectively. To obtain C-V curve, we used a MIM structure of metal(Al)-insulator(plasma polymerized thin film)-metal(Pt) structure. Al as the electrode was evaporated on the thiophene films that grew on Pt coated silicon substrates, and the dielectric constants of the as-grown films were then calculated from C- V data measured at 1MHz. From the electrical property measurements such as I-V and C-V characteristics, the minimum dielectric constant and the best leakage current of thiophene thin films were obtained to be about 3.22 and $1{\;}{\times}10^{-11}{\;}A/cm^2$. However, in case of ethylcyclohexane thin films, the minimum dielectric constant and the best leakage current were obtained to be about 3.11 and $5{\;}{\times}10^{-12}{\;}A/cm^2$.

• Bulletin of the Korean Chemical Society
• /
• 제35권8호
• /
• pp.2477-2480
• /
• 2014

Thermal degradation of titanium-containing metal-organic frameworks (MOFs; MIL-125 and MIL-125-$NH_2$ at $350^{\circ}C$ for 6 h in air produced $TiO_2$ nanoparticles of ca. 10 nm in diameter. Scanning electron and transmission electron microscope analyses indicated that those nanoparticles were aggregated randomly within each crystalline particle of their MOF precursors. The $TiO_2$ nanoparticles prepared from MIL-125-$NH_2$ exhibited higher activity for the degradation of 4-chlorophenol under visible light.

• Applied Science and Convergence Technology
• /
• 제23권5호
• /
• pp.254-260
• /
• 2014

Organic solar cells have attracted extensive attention as a promising approach for cost-effective photovoltaic devices. However, organic solar cell has disadvantage of low power conversion efficiency in comparison with other type of solar cell, due to the recombination ratio of hole and electron is too large in the active layer. Thus we have change the surface structure of PEDOT:PSS layers to improve the current density by colloidal lithography method using various-size of polystyrene sphere. The two types of coating method were applied to fabricate the different pattern shape and height, such as spin coating and drop casting. Using the organic solvent, we easily eliminate the PS sphere and could make the varied pattern shapes by controlling the wet etching time. Also we have measured the electrical properties of patterned PEDOT:PSS film to check whether it is suitable for organic photovoltaics.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2003년도 International Meeting on Information Display
• /
• pp.885-886
• /
• 2003

A bilayer is used as an anode electrode for organic electroluminescent devices. The bilayer consist of an ultrathjn ZnO layer adjacent to an hole-transporting layer and an Indium tin oxide(ITO) outerlayer. We tried to bring low the barrier between the devices as deposited ZnO films on ITO substrates. We fabricated the organic EL structure consisted of Al as cathode, $Al_{2}O_{3}$ as electro transport layer, Alq3 as luminously layer, triphenyl diamine(TPD) as hole transport layer and ZnO(l nm )/ITO(l50 nm) as anode. The result of this experiment was not good compared with the case of using ITO, Nevertheless, at this structure we obtained the lowest turn-on voltage as the value of 19 V and the good brightness (6200 $cd/m^{2}$) of the emission light from the devices. Then the quantum efficiency was to be 1.0%.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2013년도 제44회 동계 정기학술대회 초록집
• /
• pp.333-333
• /
• 2013

The poor conductivity of poly (3,4-ethylene dioxythiophene): poly (styrenesulfonate) (PEDOT:PSS) film hinders to use for a flexible electrode in solar cells. In this report we demonstrate that the conductivity of PEDOT:PSS film can be enhanced by modifying structures in a mixture of PEDOT: PSS aqueous solution and various organic solvents such as polar protic (2-propanol, methanol, ethanol, formic acid) and aprotic solvents (acetone and acetonitrile). To comparatively study the structural effects on the resulted electrical properties, the films are spin-coated on glasses and ITO. At the same time, a contact angle goniometer is used for clarifying a mechanism of wettability of PEDOT (hydrophobic) and PSS (hydrophilic) on the observed conductivity. The structures and electrical properties are investigated by FE-SEM (Field Emission Scanning Electron Microscopy), AFM (Atomic Force Microscopy), and 4-point probe, respectively.

• Nano
• /
• 제13권11호
• /
• pp.1850132.1-1850132.14
• /
• 2018

The direct synthesis of metal-organic frameworks (MOFs) with acidic and basic active sites is challenging due to the introduction of functional groups by post-functionalization method often jeopardize the framework integrity. Herein, we report the direct synthesis of acid-base bifunctional MOFs with tuning acid-base strength. Employing modulated hydrothermal (MHT) approach, microporous MOFs named $UiO-66-NH_2$ was prepared. Through the ring-opening reaction of 1,3-propanesultone with amino group, $UiO-66-NH_2-SO_3H-type$ catalysts can be obtained. The synthesized catalysts were well characterized and their catalytic performances were evaluated in one-pot glucose to 5-HMF conversion. Results revealed the acid-base bi-functional catalyst possessed high activity and excellent stability. This work provides a general and economically viable approach for the large-scale synthesis of acid-base bi-functional MOFs for their potential use in catalysis field.

• Bulletin of the Korean Chemical Society
• /
• 제30권5호
• /
• pp.1080-1084
• /
• 2009

Methyl 2,4-di-(2'-hydroxyethoxy)benzylidenecyanoacetate (3) was prepared and polymerized with terephthaloyl chloride to yield a novel Y-type polyester 4 containing 2,4-dioxybenzylidenecyanoacetate groups as NLOchromophores, which constituted parts of the polymer backbone. The resulting polymer 4 is soluble in common organic solvents such as acetone and N,N-dimethylformamide. Polymer 4 showed thermal stability up to 280 ${^{\circ}C}$ in thermogravimetric analysis with glass-transition temperature obtained from differential scanning calorimetry near 108 ${^{\circ}C}$. The second harmonic generation (SHG) coefficient ($d_{33}$) of poled polymer films at the 1064 nm fundamental wavelength was around $3.54\;{\time}\;10^{-9}$ esu. The dipole alignment exhibited a thermal stability up to near $T_g$ and no significant SHG decay was observed below 100 ${^{\circ}C}$ due to the partial main-chain character of polymer structure, which is acceptable for NLO device applications.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2009년도 제38회 동계학술대회 초록집
• /
• pp.100-100
• /
• 2010

Hydrophilic $TiO_2$ films were deposited on slide glasses using titanium tetraisopropoxide (TTIP) as a precursor by metal-organic chemical vapor deposition (MOCVD). The temperature of substrate was $400^{\circ}C$ and the temperatures of precursor were kept at $75^{\circ}C$ (sample A) and $60^{\circ}C$ (sample B) during the $TiO_2$ film growth. The deposited $TiO_2$ films were characterized by contact angle measurement and uv/vis spectroscopy. The result show that sample B has very low contact angle of almost zero due to superhydrophilic $TiO_2$ surface and transmittance is $76.85%{\pm}1.47%$ at the range of 400 - 700 nm. So, this condition is very optimal for hydrophilic $TiO_2$ film deposition. However, when the temperature of precursor is lower is lower than $50^{\circ}C$ or higher than $75^{\circ}C$, $TiO_2$ could not be deposited on the substrate and cloudy $TiO_2$ film was formed due to low precursor temperature and the increase of surface roughness, respectively.

• Bulletin of the Korean Chemical Society
• /
• 제26권10호
• /
• pp.1481-1490
• /
• 2005

Carbon-carbon single bond-forming reaction is the most useful and fundamental reaction in organic synthesis. Most of the basic carbon-carbon single bond-forming reactions, thus, developed in the past. In these respects, conceptually new C-C bond formation reaction can be highlighted. The Baylis-Hillman reaction was found at the early 1970’s. However, extensive studies on this highly potential reaction were started only before 15 years. This review has been written to shed more lights to the importance of Baylis-Hillman reaction. We have focused mainly on the reaction mechanism, conceptually related reactions, and chemical transformations of the Baylis-Hillman adducts.