• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제28권6호
• /
• pp.456-463
• /
• 2002

Distraction osteogenesis is a well-established clinical treatment for limb length discrepancy and skeletal deformities. Appropriate mechanical tension-stress is believed not to break the callus but rather to stimulate osteogenesis. In contrast to fracture healing, the mode of bone formation in distraction osteogenesis is primarily intramembranous ossification. Although the biomechanical, histological, and ultrastructural changes associated with distraction osteogenesis have been widely described, the basic biology of the process is still not well known. Moreover, the molecular mechanisms in distraction osteogenesis remain largely unclear. Recent studies have implicated the growth factor cascade is likely to play an important role in distraction. And current reserch suggested that mechanical tension-stress modulates cell shape and phenotype, and stimulates the expression of the mRNA for bone matrix proteins. This article presents the hypotheses and current research that have furthered knowledge of the molecular biology that govern distraction osteogenesis. The gene regulation of growth factors and extracellular matrix proteins during distraction osteogenesis are discussed in this article. It is believed that understanding the biomolecular mechanisms that mediate distraction osteogenesis may guide the development of targeted strategies designed to improve distraction osteogenesis and accelerate bone healing.

• 한국농촌건축학회논문집
• /
• 제19권4호
• /
• pp.49-56
• /
• 2017

Each country in the world currently concentrates on shifting into clean energy, which can be alternative energy, for global environment protection and solution to the problem of fossil fuel depletion. The Korean government is predicted to develop renewable energy, such as solar power, ground power, and offshore wind power, and to increase their supply ratios by ending the use of coals and nuclear power plants. This study conducted experiments on thermal storage performance of Trombe wall thermal storage materials using solar power and simulations in order to offer baseline data for the development of a hybrid air circulation system for heating that can maximize efficiency by simultaneously using solar and geothermal power. The study results are as follows: (1) In all the specimens with 3m, 5m, and 7m in the length of thermal storage pipe, $5.7^{\circ}C$, $7.8^{\circ}C$, and $10.5^{\circ}C$ rose, respectively, as the thermal storage effect of the specimens attaching insulation film and black tape to the general funnel. They were most excellent in terms of thermal storage effect. (2) As a result of thermal performance evaluation on the II type specimens, II-3 ($7.8^{\circ}C$ rise) > II-4 ($5.3^{\circ}C$ rise) > II-1 ($3.9^{\circ}C$ rise) > II-2 ($2.3^{\circ}C$ rise) was revealed, and thus II-3 (insulation film + black tape) was most effective as shown in the I type. (3) This study analyzed air current and temperature distribution inside of the greenhouse by linking actually measured values and simulation interpretation results through the interpretation of CFD (computational fluid dynamics). As a result, the parts absorbing heat and discharging heat around the thermal storage pipe could be visibly classified, and temperature distribution inside of the greenhouse around the thermal storage pipe could be figured out.

• 한국환경생태학회지
• /
• 제22권2호
• /
• pp.119-127
• /
• 2008

본 연구는 북한산 국립공원을 대상으로 산사태 발생인자들에 대한 공간정보를 구축하였으며, 중첩분석 및 합산평가 매트릭스분석을 이용한산사태 취약성 지도 및 생태적 위험 지표 작성을 통해 향후산사태 재해 예방을 위한 기초자료를 제시하고자 하였다. 산사태 평가 인자로는 사면경사, 사면방향, 경사길이, 토양배수, 식생활력도(NDVI), 토지이용도가 선택되었으며, 공간데이터베이스는 $30m\times30m$ 해상도로 구축되었다. 분석결과, 우이동 및 도봉계곡 일대의 산사태 취약성이 높은 것으로 분석되었으며, 생태적 위험도는 도봉계곡, 용어천계곡 및 정릉계곡, 평창계곡 등이 높은 것으로 분석되어 향후 이들 지역의 관리계획 수립 시 산사태 위험에 대한 영향도 고려되어져야 할 것으로 판단된다.

• 복식
• /
• 제59권8호
• /
• pp.49-65
• /
• 2009

As basic materials in this research, 874 pieces of engraving that recorded the garment produced by diverse authors in the 17-18th century were collected among the collections of male and female garment in the engraving kept by National Library of France and 216 pieces of engraving were classified among them to observe justaucorps as stated in the materials. Since type of justaucorps in the 18th century can be classified by difference in shape and change through the above engraving materials in large quantity and the shape and composition can be compared and analyzed with other materials such as picture, stored garment, written materials without difficulty, the chronology can be composed by single type of justaucorps. Intending to understand the change in composition caused by type classification and pattern making as per analysis of type property of justaucorps, the men's upper garment in France in the 18th century. Checking change in design per from and materials, justaucorps of 1680-1700s was in silhouette where waist in the length above knee was adhered and slightly spread to lower part. In the type of 1710-1750s, waist adhered remarkably and many pleats were made under waist to produce volume of form that spread to lower part like skirt. In the type of 1760-1780s, straight silhouette was attached to whole body and end of front adjustment in slant line turns to rear part. The developmental aspect of construction can be checked by making pattern. Changing the cutting line of body plate to smoothly connect section and to try to adhere to the body, the development of simpler and delicate pattern production technique was confirmed.

• Steel and Composite Structures
• /
• 제18권5호
• /
• pp.1305-1330
• /
• 2015

The successful application of the component-based approach - widely used to model structural joints - requires knowledge of the mechanical properties of the constitutive joint components, including an appropriate assembly procedure to derive the joint properties. This paper presents a component-method model for a structural joint component that is located in the tension zone of blind-bolted connections to concrete-filled tubular steel profiles. The model relates to the response of blind-bolts with headed anchors under monotonic loading, and the blind-bolt is termed the "Extended Hollo-bolt". Experimental data is used to develop the model, with the data being collected in a manner such that constitutive models were characterised for the principal elements which contribute to the global deformability of the connector. The model, based on a system of spring elements, incorporates pre-load and deformation from various parts of the blind-bolt: (i) the internal bolt elongation; (ii) the connector's expanding sleeves element; and (iii) the connector's mechanical anchorage element. The characteristics of these elements are determined on the basis of piecewise functions, accounting for basic geometrical and mechanical properties such as the strength of the concrete applied to the tube, the connection clamping length, and the size and class of the blind-bolt's internal bolt. An assembly process is then detailed to establish the model for the elastic and inelastic behaviour of the component. Comparisons of model predictions with experimental data show that the proposed model can predict with sufficient accuracy the response of the component. The model furthers the development of a full and detailed design method for an original connection technology.

• 복식문화연구
• /
• 제11권6호
• /
• pp.889-901
• /
• 2003

The purpose of this study is to look into the physical features for each residential area by the age, with the female subjects residing in Beijing and Shanghai. This would provide the specific information regarding the body types of Chinese adult women, and additionally it would assist the effective advancement into the Chinese local markets by serving as the basic data for the size development and fitting improvement of clothing products for Chinese women. The body measurements were made with 525 adult female subjects of 20 to 49 years of age, residing in Beijing and Shanghai, China. The number of measurements items was 79. The results are as follows: As they grew older, the women residing in Beijing and Shanghai all showed increases in the items of width, thickness, girth, and length, which are highly correlated with the physical obesity, while they did not show any differences by the age range in the item of height. Differences were also found in the tendency of the type distribution by the age range of Chinese adult women in each residential area. As they grew older, the women residing on Beijing showed increases in the distribution of Body type 2 and Body type 4, which clearly indicated the features of obesity. On the other hand, the women residing in Shanghai showed the almost similar distribution in their 20's and 30's, while those in their 40's showed a high frequency in Body type 2 than in Body type 4.

• International Journal of Precision Engineering and Manufacturing
• /
• 제8권2호
• /
• pp.70-74
• /
• 2007

This paper describes the development of a nano-positioning system for nanoscale science and engineering. Conventional positioning systems, which can be expensive and complicated, require the use of laser interferometers or capacitive transducers to measure nanoscale displacements of the stage. In this study, a new self-displacement sensing (SDS) nano-stage was developed using mechanical magnification of its displacement signal. The SDS nano-stage measured the displacement of its movement using a position-sensitive photodiode (PSPD), a laser source, and a hinge-connected rotating mirror plate. A beam from a laser diode was focused onto the middle of the plate with the rotating mirror. The position variation of the reflected beam from the mirror rotation was then monitored by the PSPD. Finally, the PSPD measured the amplified displacement as opposed to the actual movement of the stage via an optical lever mechanism, providing the ability to more precisely control the nanoscale stage. The displacement amplification process was modeled by structural analysis. The simulation results of the amplification ratio showed that the distance variation between the PSPD and the mirror plate as well as the length L of the mirror plate could be used as the basic design parameters for a SDS nano-stage. The PSPD was originally designed for a total travel range of 30 to 60 mm, and the SDS nano-stage amplified that range by a factor of 15 to 25. Based on these results, a SDS nano-stage was fabricated using principle of displacement amplification.

• 패션비즈니스
• /
• 제17권2호
• /
• pp.46-62
• /
• 2013

This thesis aims to provide basic resources for the development of various uniform designs of cheerleaders by investigating the currently favoured uniform designs. The 13 professional cheerleader teams were existed among the 25 professional sports teams-9 baseball, 10 basketball and 6 volleyball teams. In each sports teams, four cheerleader's uniform were chosen and evaluated in terms of the cheerleader uniform design by analyzing the forms, colors, decorations and accessories. The result shows that the common kinds of design representing the symbolic color and the emblem were generally prevalent, instead of particular types of uniform design and subject in accordance with different kinds of the professional baseball, basketball and volleyball respectively. Throughout all the kinds of the sports, the combination of the sleeveless top and hot-pants were most frequently observed. In case of the skirts, the mini flare, wrap, and pleats skirts were the most prevalent, because it gave free to motion for cheerleading. The one-piece style were rather infrequent, comparing with the two-pieces, with the hourglass and fitted silhouette the most frequent type, and all those were mini in length. The sleeve in top were generally absent or short, however the bare top style was never found that the top would have a risk of being taken off downwardly during cheerleading. The accessories and the cheering tools were not so much used. The cap and headdresses were not many in kinds. The pompom, megaphone, tube stick, towel, umbrella and musical instruments would not be sufficient to play a role of tools for cheering, which suggests that the rather advanced tools or instruments for cheering in the sports need to be developed, not alone the uniform design.

• Advances in nano research
• /
• 제7권6호
• /
• pp.405-417
• /
• 2019

This research is devoted to study post-buckling analysis of functionally graded carbon nanotubes reinforced composite (FG-CNTRC) micro plate with cut out subjected to magnetic field and resting on elastic medium. The basic formulation of plate is based on first order shear deformation theory (FSDT) and the material properties of FG-CNTRCs are presumed to be changed through the thickness direction, and are assumed based on rule of mixture; moreover, nonlocal Eringen's theory is applied to consider the size-dependent effect. It is considered that the system is embedded in elastic medium and subjected to longitudinal magnetic field. Energy approach, domain decomposition and Rayleigh-Ritz methods in conjunction with Newton-Raphson iterative technique are employed to trace the post-buckling paths of FG-CNTRC micro cut out plate. The influence of some important parameters such as small scale effect, cut out dimension, different types of FG distributions of CNTs, volume fraction of CNTs, aspect ratio of plate, magnitude of magnetic field, elastic medium and biaxial load on the post-buckling behavior of system are calculated. With respect to results, it is concluded that the aspect ratio and length of square cut out have negative effect on post-buckling response of micro composite plate. Furthermore, existence of CNTs in system causes improvement in the post-buckling behavior of plate and different distributions of CNTs in plate have diverse response. Meanwhile, nonlocal parameter and biaxial compression load on the plate has negative effect on post-buckling response. In addition, imposing magnetic field increases the post-buckling load of the microstructure.

• 대한조선학회논문집
• /
• 제53권6호
• /
• pp.447-455
• /
• 2016

Precise propulsion shafting alignment of ships is very important to prevent damage of its support bearings due to excessive reaction forces caused by hull deflection, forces acted on propeller and crankshaft, and so forth. In this paper, a new iterative shafting alignment calculation procedure considering the interaction between shaft deflection and oil film pressure of Sterntube Journal Bearing (SJB) bush with single or multiple slopes is proposed. The procedure is based on a pressure analysis to evaluate distributed equivalent support stiffness of SJB by solving Reynolds equation and a deflection analysis of shafting system by a finite element method based on Timoshenko beam theory. SJB is approximated with multi-point biaxial elastic supports equally distributed to its length. Their initial stiffness values are estimated from dynamic reaction force calculated by assuming SJB as single rigid support. Then, the shaft deflection and the support stiffness of SJB are sequentially and iteratively calculated by applying a criteria on deflection variation between sequential calculation results. To demonstrate validity and applicability of the proposed procedure for optimal slope design of SJB, numerical analysis results for a shafting system are described.