• Journal of Korean Ophthalmic Optics Society
• /
• v.11 no.2
• /
• pp.99-107
• /
• 2006

The purpose of this study was to investigate the cause of discomfort come from wearing of soft contact lens(SCL) exposed to fundamental cosmetics, After SCLs were smeared with skin lotion, essence lotion or nutritional cream, they were exposed to artificial tear for 7 days, and then changes of the adhered protein amount, the transmission of visible light, the wettability and the base curve were estimated. The amount of protein adhered to SCLs were increased 3 times by being exposed to fundamental cosmetics. Moreover, the transmission of visible light of SCL exposed to both nutritional cream and artificial tear was 92.8%, which was 4.7% lower than SCL exposed only to artificial tear. By being exposed to skin lotion, essence lotion or nutritional cream, the contact angle of SCLs were increased up to $7.1^{\circ}$, $7.0^{\circ}$ or $5.7^{\circ}$ and the base curve of SCLs were decreased to 3.2%, 5.1% or 8.3%, respectively.

• Journal of the Chungcheong Mathematical Society
• /
• v.33 no.3
• /
• pp.365-374
• /
• 2020

Given a noncompact semisimple Lie group G and its maximal compact Lie subgroup K such that the right multiplication of each element in K gives an isometry on G, consider a principal bundle G → G/K, which is a Riemannian submersion. We study the infinitesimal holonomy isometries. Given a closed curve at eK in the base space G/K, consider the holonomy displacement of e by the horizontal lifting of the curve. We prove that the correspondence is continuous.

• Kyungpook Mathematical Journal
• /
• v.62 no.3
• /
• pp.509-531
• /
• 2022

In this paper we define a new family of ruled surfaces using an othonormal Sannia frame defined on a base consisting of the striction curve of the tangent, the principal normal, the binormal and the Darboux ruled surface. We examine characterizations of these surfaces by first and second fundamental forms, and mean and Gaussian curvatures. Based on these characterizations, we provide conditions under which these ruled surfaces are developable and minimal. Finally, we present some examples and pictures of each of the corresponding ruled surfaces.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.8 no.4
• /
• pp.1-11
• /
• 2012

This paper is the study on the development of a torque precision measuring system using the curve fitting algorithm. This system can be divided into the hardware part and the software part. The hardware part consists of the main base board, the DAQ(Data Aquisition) board and Calibration parts. The software part consists of the software filter module and the curve fitting algorithm module. We have tested the torque transducer including the strain gauge for 200 Nm range and have analyzed the data acquired with the curve fitting algorithm by using this system. The DAQ board converts the electric signal induced by the transducer to the digital value precisely by using the shunt calibration procedure. The main board including the curve fitting algorithm calculates the exact digital torque value by using the digital value from the DAQ board. In this study, we confirmed that the result of the appropriate high-order power-series polynomial function is more accurate than the result of the low-order power-series polynomial through the system.

• Kyungpook Mathematical Journal
• /
• v.54 no.2
• /
• pp.203-209
• /
• 2014

We assume that the existence and termination conjecture for flips holds. A complex projective manifold is said to be of almost general type if the intersection number of the canonical divisor with every very general curve is strictly positive. Let f be an algebraic fiber space from X to Y. Then the manifold X is of almost general type if every very general fiber F and the base space Y of f are of almost general type.

• Proceedings of the KSR Conference
• /
• 2010.06a
• /
• pp.958-962
• /
• 2010

Most of operating railways in domestic, it is used to be Wheel flange lubricator system applied liquid spray type. Wheel flange lubricator are reduced the abrasion of wheel flange through spraying in accordance with operating on the curve or operating function of time base and/or distance base. this paper is written to introduce and study the efficiency for the angular velocity sensing type of lubricant systems.

• Journal of the Korean Society for Precision Engineering
• /
• v.12 no.8
• /
• pp.114-121
• /
• 1995

This paper describes a method which uses rail curves for blending surfaces. Blending surface between the free form surfaces which have the flexible shapes and are widely used today is investigated. The rail curves give blending surface continuty through Pointwise interpola- tion. It is the point in this paper that the blending surfaces give a good flexibility to modeling of base free form surfaces. Using rail curves for simple base surfaces, complicated models can be designed. Also this blending surfaces can be used for path generation in compoud surfaces.

• Economic and Environmental Geology
• /
• v.43 no.5
• /
• pp.523-528
• /
• 2010

With the financial crisis from USA had negative impacts on the real economy, base metals price on LME was downward in 4 quarter of 2008. Following the deepest global downturn in recent history, economic growth solidified and broadened to advanced countries and simultaneously the price of base metal on LME showed a rising curve over 2009. There are three factors supported an upward tendency of base metal's price. The First factor is the US economy recovery, the second factor is the weak dollar, the third factor is the chinese base metal demand. Among the factors, the last one is a major factor. Therefore, this study analyze the factor of the movement of price of base metal with linear regression analysis. The result of analysis show that the chinese GDP growth has effect on the recent upward base metal price. Despite the result, the upward movement is difficult to be sustained without the full recovery of advanced economies.

• Smart Structures and Systems
• /
• v.22 no.4
• /
• pp.383-397
• /
• 2018

Traditional base isolation systems focus on isolating the seismic response of a structure in the horizontal direction. However, in regions where the vertical earthquake excitation is significant (such as near-fault region), a traditional base-isolated building exhibits a significant vertical vibration. To eliminate this shortcoming, a rocking-isolated system named Telescopic Column (TC) is proposed in this paper. Detailed rocking and isolation mechanism of the TC system is presented. The seismic performance of the TC is compared with the traditional elastomeric bearing (EB) and friction pendulum (FP) base-isolated systems. A 4-storey reinforced concrete moment-resisting frame (RC-MRF) is selected as the reference superstructure. The seismic response of the reference superstructure in terms of column axial forces, base shears, floor accelerations, inter-storey drift ratios (IDR) and collapse margin ratios (CMRs) are evaluated using OpenSees. The results of the nonlinear dynamic analysis subjected to multi-directional earthquake excitations show that the superstructure equipped with the newly proposed TC is more resilient and exhibits a superior response with higher margin of safety against collapse when compared with the same superstructure with the traditional base-isolation (BI) system.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2001.11a
• /
• pp.42-42
• /
• 2001

The rate of coating consolidation influences the operation of several coating methods and the final quality of the coating layer. The rate of coating consolidation is characterized with a dynamic gloss meter at short times for a thin coating layer applied to the base sheet of interest. During the coating consolidation process, the laser gloss meter response curve exhibits two critical turning points that indicate the two coating immobilization points defined by the traditional methods. Five base sheets with several different coating suspensions are characterized. A model is proposed to estimate the rate of consolidation based on physical properties of the coating suspension, the base paper, and the liquid phase of the coating. The paper properties, especially the contact angle, are found to be an important factor in determining rate of consolidation. The model predicts the correct trends for the different coating suspensions and base sheets. The test method, along the model, can be used to determine the filtercake resistance of the coating layer for a thin and rapidly formed filtercake.