• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.11
• /
• pp.604-613
• /
• 2018

In recent years, numerous train derailment accidents caused by deterioration and high speed technology of railways have increased. Guardrails or barriers of railway bridges are installed to restrain and prevent the derailment of the train body level. On the other hand, it can result in a high casualties and secondary damage. Therefore, a Derailment Containment Provision (DCP) within the track at the wheel/bogie level was developed. DCP is designed for rapid installation because it reduces the impact load on the barrier and inertia force on the steep curve to minimize turnover, fall, and trespass on the other side track of the bridge. In this paper, DCP was analyzed using LS-Dyna with a parameter study as the impact loading location and interface contact condition. The contact conditions were analyzed using the Tiebreak contact simulating breakage of material properties and Perfect bond contact assuming fully attached. As a result, the Tiebreak contact behaved similarly with the actual behavior. In addition, the maximum displacement and flexural failure was generated on the interface and DCP center, respectively. The impact analysis was carried out in advance to confirm the DCP design due to the difficulties of performing the actual impact test, and it could change the DCP anchor design as the analysis results.

• Journal of Service Research and Studies
• /
• v.8 no.4
• /
• pp.77-88
• /
• 2018

Collaboration works on R&D project have many characteristics in interoranizational relationships. There are many variables on explaining the their relationships. In the previous study, I chose some relevant variables and some hypotheses. Base on service marketing theories and relationship marketing perspective I suggest 5 hypotheses. Independent variables are fairness and quality, and dependent variable is loyalty. And trust are treated as the intervening variable between the independent variables and dependent variable. To test the research model and some hypothesis empirically, I collected the data using the questionnaire. Sample size was 448, it was enough to analyze statistically. Data were analysed using the SPSS and AMOS. In the previous study, H1($fairness{\rightarrow}trust$), H2($quality{\rightarrow}trust$), H5($trust{\rightarrow}loyalty$) were accepted, but H3 and H4 were rejected. The reason H3($fairness{\rightarrow}loyalty$) and H4($quality{\rightarrow}loyalty$) were not accepted might be attributed to the fact that trust was the mediating variable between fairness and loyalty, quality and loyalty. Specific research methodologies and statistical findings from AMOS were referred in the previous study(Jeong 2018). In this study, I suggested some hypotheses on the mediating role trust between fairness and loyalty and service quality and loyalty. Using the PROCESS-macro, I found that trust was the mediating variable between fairness and loyalty as well as service quality and loyalty. This research is the complementary and extended study from previous research.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.23 no.3
• /
• pp.92-95
• /
• 2019

In this paper, a novel laser-based non-contact and non-destructive stress measurement technique is newly proposed for measuring stress in steel structural members. As the demand of stress monitoring in structural members is increased, various non-destructive techniques are being applied to the field of structural health monitoring. Spectroscopic techniques are non-contact technique and widely used for chemical identification of target materials. Especially, piezospectroscopic technique is a residual stress measurement technique in thermal barrier coatings. Although the piezospectroscopic technique has high possibility of measuring structural stress in steel members, the technique has been rarely applied to this field. In this paper, piezospectroscopy-based stress measurement technique is, therefore, proposed for measuring stress in steel structural member. To do that, alumina particles have been coated onto a specimen of a structural steel rod using a thermal spray coating technique. And then, an uniaxial compression test has been conducted to the specimen to collect each fluorescence spectrum under different loading conditions. Finally, the linear relation of spectral shift and applied compressive stress of the specimen has been experimentally established.

• Journal of the Korean Applied Science and Technology
• /
• v.37 no.6
• /
• pp.1738-1751
• /
• 2020

The skin is divided into three parts: the epidermis, the dermis, and the subcutaneous fat, and the stratum corneum, which is located at the top of the epidermis, acts as a barrier that prevents drug delivery. Nanoemulsions are known to be effective in transdermal delivery of drugs through intercellular lipids because of their unique small particle size. In this study, phase inversion temperature (PIT) nanoemulsion containing α-bisabolol was optimized using response surface methodology (RSM) for effective skin absorption of α-bisabolol. As a preliminary experiment, the 25-2 fractional factorial design method and the 23 full factorial design method were performed. Box-Behnken design was performed based on the results of the factorial design method. The content of surfactant (6.3~12.6%), co-surfactant (5.2~7.8%) and α-bisabolol (0.5~5.0%) were used as factors, and the dependent variable was the particle size of the nanoemulsion. PIT nanoemulsion optimization was performed according to the RSM results, and as a result, the optimal nanoemulsion formulation conditions were predicted to be 10.4% surfactant content, 6.3% co-surfactant content, and 5.0% α-bisabolol content. As a result of the skin absorption test, the final skin absorption rate of the PIT nanoemulsion was 35.11±1.01%, and the final skin absorption rate of the general emulsion as a control was 28.25±1.69%, confirming that the skin absorption rate of the PIT nanoemulsion was better.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.6
• /
• pp.573-582
• /
• 2021

In this study, a series of processes for evaluating the effective protection against barriers that should be equipped in institutions that perform reliability tests on high-risk ammunition, such as high-explosive ammunition, were introduced. The impact that high-explosive bombs can have on personnel includes damage to the eardrum and lungs caused by explosion overpressure and penetrating wounds that can be received by fragments generated simultaneously with the explosion. Therefore, a high-explosive with COMP B explosives as its contents were set up, and an explosion protection theory investigation to calculate the degree of damage, numerical calculations and simulations were performed to verify the protection power. A numerical calculation revealed the maximum explosion overpressure on the protective wall when the high-explosive exploded and the penetration force of the fragment against a 50 mm-thick protective wall to be 77.74 kPa and 41.34 mm, respectively. In the simulation verification using AUTODYN, the maximum explosion overpressures affecting the firewall and personnel were 56.68 kPa and 18.175 kPa, respectively, and the penetration of fragments was 35.56 mm. This figure is lower than the human damage limit, and it was judged that the protective power of the barrier would be effective.

• (The)Korea Educational Review
• /
• v.23 no.3
• /
• pp.225-251
• /
• 2017

The purpose of this study is to examine study abroad participation and its relationship with career decision self-efficacy. It also aims to explore the explanatory factors for this relationship using mixed methods. Data were collected from 258 study abroad participants using pre- and post-test surveys at the A university. Subsequently, qualitative interviews with 16 participants were conducted to explain quantitative results. Findings showed that the career-related achievement goal and participants' interactions with local students played an important role in participants' career development. On the other hand, the group of participants whose career decision self-efficacy decreased after participation were also identified. This finding can be understood from the qualitative finding that participants bounced back to their previous career plans after return, re-experiencing the barrier of reality in finding a job in the Korean society. This is different from the circumstances in a destination country they studied abroad in. In addition, the quantitative finding can be understood from the qualitative finding that some students decided to participate in study abroad program simply for vacation and international experiences, without trying to relate it to career exploration. Based on findings from this study, implications for higher education institutions running a study abroad program were discussed and suggestions for future research were provided.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.26 no.7
• /
• pp.820-829
• /
• 2020

Because ships have limited support from land, it is necessary to equip them with automatic external defibrillators (AEDs) in preparation for the incidences of cardiac arrest patients and to properly place and manage AEDs. The seafarer must have the ability to use the AEDs. This is a study to identify the placement and management of AEDs in order to increase the utilization of AEDs in ships, analyze the ability of seafarers to use AEDs and their intention to use it, and suggest improvement plans. The study was conducted from September 9, 2019, to February 20, 2020, and a total of 244 ships and 244 seafarers were surveyed. The data were analyzed by the frequency, percentage, and chi-square test using SPSS WIN 23.0 program. As a result, most of the ships with one AED number were identified, and some ships with insufficient AED placement and management were also identified. A total of 142 seafarers (58.2 %) had experience in participating in AED education; 136 seafarers (55.7 %) had intention to use AEDs; and the most barrier factor was "I don't know how to use" (63.0 %). The intention to use AEDs was high among seafarers in the position of the captain, navigator, and deck department personnel, and when they had an experience in AED training and the training period was less than six months, they were active in using AEDs. In addition, efforts to raise an awareness and education of AEDs are required for occupational groups other than navigators who are not willing to use AEDs in ships, and it is necessary to review appropriate retraining cycles through an evaluation of the seafarer's ability to use AEDs.

• Journal of the Korea Convergence Society
• /
• v.12 no.11
• /
• pp.53-67
• /
• 2021

According to statistics, the number of mobile payment users in China shows an increasing trend year by year. However, less than half of people over 60 years old use mobile payment. The purpose of this study is to explore the reasons for the low usage rate of mobile payment platforms among the elderly in China. Through literature research, questionnaires and interviews, the author found that the main obstacle for the elderly in China to use mobile payment platforms is acceptance barrier. Then, the user experience research method and technology acceptance model (TAM) were combined to construct a new research model and five hypotheses affecting acceptance behavior in the model were summarized. Finally, the Analysis of Covariance(ANCOVA) was used to test the hypotheses and found that satisfaction (SA), perceived usefulness (PU) and job relevance (JR) had significant coefficients of 0.001, 0.000 and 0.004 respectively, all of which were less than 0.05 and therefore had a significant effect on acceptability. The other two elements, perceived ease of use (PE) and self-efficacy (SE), did not have a significant effect on acceptability. Ultimately, a new user experience acceptability model was constructed to provide theoretical support for mobile payment platform developers and designers to develop products from the acceptability perspective, so as to develop more mobile payment methods suitable for elderly users and improve the acceptance of mobile payment by the elderly.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.25 no.2
• /
• pp.175-186
• /
• 2023

The buffer materials in disposal hole are exposed to the decay heat from spent nuclear fuels and groundwater inflow through adjacent rockmass. Since understanding of thermal-hydro-mechanical-chemical (T-H-M-C) interaction in buffer material is crucial for predicting their long-term performance and safety of disposal repository, it is necessary to investigate the heating-hydration characteristics and consequent T-H-M-C behavior of the buffer materials under disposal conditions considering geochemical factors. In response, the Korea Atomic Energy Research Institute developed a laboratory-scale 'Lab.THMC' experiment system, which characterizes the T-H-M behavior of buffer materials under different geochemical conditions by analyzing heating-hydration process and stress changes. This technical report introduces the detail design of the Lab.THMC system, summarizes preliminary experimental results, and outlines future research plans.

• Journal of the Microelectronics and Packaging Society
• /
• v.30 no.2
• /
• pp.52-59
• /
• 2023

The effects of dielectric curing temperature and temperature/humidity treatment conditions on the interfacial adhesion energies between Ti diffusion barrier/polybenzoxazole (PBO) dielectric layers were systematically investigated for Cu redistribution layer applications of fan-out wafer level package. The initial interfacial adhesion energies were 16.63, 25.95, 16.58 J/m² for PBO curing temperatures at 175, 200, and 225 ℃, respectively. X-ray photoelectron spectroscopy analysis showed that there exists a good correlation between the interfacial adhesion energy and the C-O peak area fractions at PBO delaminated surfaces. And the interfacial adhesion energies of samples cured at 200 ℃ decreased to 3.99 J/m² after 500 h at 85 ℃/85 % relative humidity, possibly due to the weak boundary layer formation inside PBO near Ti/PBO interface.