• 응용통계연구
• /
• 제33권2호
• /
• pp.161-170
• /
• 2020

${\bar{X}}-S^2$ 관리도는 공정 평균과 산포의 변화를 동시에 탐지하는 전통적인 관리도들 중 하나이다. 일반적으로 사용하는 ${\bar{X}}-S^2$ 관리도의 설계 방법은 병행하는 관리도의 오경보율은 주어진 값을 만족하면서 각 관리도는 동일한 개별적인 오경보율을 갖도록 설정하는 것이다. 이 논문에서는 각 관리도의 개별 오경보율을 다르게 설정하고 이것이 ${\bar{X}}-S^2$ 관리도의 성능에 어떠한 영향을 주는지 살펴보았다. 이를 위해 ${\bar{X}}$ 관리도의 오경보율을 S² 관리도의 오경보율에 γ배한 경우를 고려하였고, γ값에 따른 ${\bar{X}}-S^2$ 관리도 성능을 비교하였다. 관리도의 성능을 평가하는 측도로는 특정한 변화에 대한 성능을 판단하는 경우 이상상태에서의 평균런길이를 사용하였고, 전반적인 성능을 판단하는 경우 RMI(relative mean index)를 사용하였다.

• 한국경영과학회지
• /
• 제39권1호
• /
• pp.1-12
• /
• 2014

This article proposes a variable sampling interval (VSI) $\bar{X}$ control chart using weighted standard deviation (WSD) method for skewed populations. The WSD method decomposes the standard deviation of a quality characteristic into upper and lower deviations and adjusts control limits and warning limits of a control chart in accordance with the direction and degree of skewness. A control chart constant is derived for estimating the standard deviation of skewed distributions with the mean of sample standard deviations. The proposed chart is compared with the conventional VSI $\bar{X}$ control chart under some skewed distributions. Simulation study shows that the proposed WSD VSI chart can control the in-control average time to signal (ATS) as an adequate level better than the conventional VSI chart, and the proposed chart can detect a decrease in the process mean of a quality characteristic following a positively skewed distribution more quickly than the standard VSI chart.

• 한국건설관리학회논문집
• /
• 제5권5호
• /
• pp.135-142
• /
• 2004

본 연구에서는 바차트(bar chart) 기법과 CPM 기법의 장점을 결합한 CPM bar chart(CBC) 기법을 제시한다. CBC는 기존의 fenced bar chart(FBC)의 장점을 유지하면서 단점을 보완한 것으로, 작업 관계를 나타내는 fence에 방향성을 부여함으로써, 기존 FBC에서 상당한 혼란을 유발하는 fence의 분리과정 없이 작업들의 관계를 표현할 수 있다. 또한, fence의 분리를 파악하기 위해 더미작업(dummy activity)을 확인하는 과정이 생략되어 보다 손쉽게 작성할 수 있는 장점도 있다. 바차트의 간결성을 유지하면서 CPM의 네트워크 논리 표현이 가능해짐에 따라, CBC는 다양한 프로젝트 참여자들 간의 원활한 의사소통에 기여하리라 예상된다. 또한, resource constrained scheduling, resource leveling, 작업 분리가 고려된 일정 조정, 공기 지연 분석 등의 CPM 기법에 기초한 다양한 일정 계획 및 관리에도 적용이 용이하여, 실무뿐만이 아니라 공정관리 교육과정에서도 활용성이 높으리라 기대된다.

• 품질경영학회지
• /
• 제32권4호
• /
• pp.156-168
• /
• 2004

This research investigates the statistical efficiency of variable sampling size & sampling interval(VSSI) $\bar{X}$ charts under two assignable causes. Algorithms for calculating the average run length(ARL) and average time to signal(ATS) of the VSSI $\bar{X}$ chart are proposed by employing Markov chain method. States of the process are defined according to the process characteristics after the occurrence of an assignable cause. Transition probabilities are carefully derived from the state definition. Statistical properties of the proposed chart are also investigated. A simple procedure for designing the proposed chart is presented based on the properties. Extensive sensitivity analyses show that the VSSI $\bar{X}$ chart is superior to the VSS or VSI $\bar{X}$ chart as well as to the Shewhart $\bar{X}$ chart in statistical sense, even tinder two assignable causes.

• 국제학술발표논문집
• /
• The 1th International Conference on Construction Engineering and Project Management
• /
• pp.1118-1123
• /
• 2005

This paper proposes the CPM bar chart (CBC), a hybrid of the bar chart and the critical path method (CPM). The CBC overcomes shortages of the fence bar chart, while still retaining its advantages. The fence with direction is applied instead of the broken fence, which triggers considerable problems to identify and apply in the fenced bar chart. In addition, the notorious task to find dummy activities is no longer required. Upon the benefits of simplicity in the bar chart and logical work sequence in the CPM network, the CBC provides a relatively easy way to create and understand a schedule, thus improving communication quality between project participants.

• 품질경영학회지
• /
• 제44권4호
• /
• pp.751-770
• /
• 2016

Purpose: Two-stage ${\bar{X}}$ chart is a useful tool for process control when a surrogate variable may be used together with a performance variable. This paper extends the two-stage ${\bar{X}}$ chart to a three stage version by decomposing the first stage into the preliminary stage and the main stage. Methods: The expected cost function is derived using Markov-chain approach. The optimal designs are found for numerical examples using a genetic algorithm combined with a pattern search algorithm and compared to those of the two-stage ${\bar{X}}$ chart. Sensitivity analysis is performed to see the parameter effects. Results: The proposed design outperforms the optimal design of the two-stage ${\bar{X}}$ chart in terms of the expected cost per unit time unless the correlation between the performance and surrogate variables is modest and the shift in process mean is smallish. Conclusion: Three-stage ${\bar{X}}$ chart may be a useful alternative to the two-stage ${\bar{X}}$ chart especially when the correlation between the performance and surrogate variables is relatively high and the shift in process mean is on the small side.

• 품질경영학회지
• /
• 제31권2호
• /
• pp.117-130
• /
• 2003

This paper investigates the economic design of synthetic control charts. The synthetic control chart has been proven to be statistically superior to the $\bar{X}$-control chart, but its economic characteristics have not been known. We develop an economic model of the synthetic control chart, based on Duncan's model. The synthetic chart has one more decision variable, the lower control limit for the conforming run length. In addition to this, the significance level and the power of the synthetic chart are more complicated than those of the $\bar{X}$-chart. These features make the optimization problem more difficult. We propose an optimization algorithm by adapting the congruent gradient algorithm. We compare the optimal cost of the synthetic chart with that of (equation omitted)-control chart, under the same input parameter set of Duncan’s. For all cases investigated, the synthetic chart shows superior to the $\bar{X}$-chart. The synthetic control chart is easy to implement, and it has better characteristics than the $\bar{X}$-chart in economical sense as well as in statistical sense, so it will be a good alternative to the traditional control charts.

• 품질경영학회지
• /
• 제28권3호
• /
• pp.18-30
• /
• 2000

Recent studies have shown that the $\bar{X}$ chart with variable sampling intervals(VSI) and the $\bar{X}$ chart with variable sample size(VSS) are much quicker than Shewhart $\bar{X}$ chart in detecting shiks in the process. Shewhart $\bar{X}$ chart has been beneficial to detect large shifts but it is hard to apply Shewhart $\bar{X}$ chart in detecting moderate shifts in the process mean. In this article the $\bar{X}$ chart using variable sample size(VSS) and variable sampling Intervals(VSI) has been proposed to supplement the weak point mentioned above. So the purpose of this paper is to consider finding the design parameters which minimize expected loss costs for unit process time and measure the performance of VSSI(variable sample size and sampling interval) $\bar{X}$ chart. It is important that assignable causes be detected to maintain the process controlled. This paper has been studied under the assumption that one cycle is from starting of the process to eliminating the assignable causes in the process. The other purpose of this article is to represent the expected loss costs in one cycle with three process parameters(sample size, sampling interval and control limits) function and find the three parameters.

• 품질경영학회지
• /
• 제45권4호
• /
• pp.943-956
• /
• 2017

Purpose: This paper proposes a VSS(Variable Sample Size) ${\bar{X}}$ control chart using surrogate variable and shows its effectiveness compared with FSS(Fixed Sample Size) ${\bar{X}}$ control chart using either performance variable or surrogate variable. Methods: The expected cost function of VSS ${\bar{X}}$ control chart is derived. The optimal designs are then found for numerical examples using a GA(genetic algorithm) and compared to those of the FSS ${\bar{X}}$ control charts. Results: Computational results show that VSS ${\bar{X}}$ control chart using surrogate variables is superior to FSS ${\bar{X}}$ control chart using either performance variable or surrogate variable from the economic view points. Conclusion: The proposed VSS ${\bar{X}}$ control chart will be useful in industry fields where a performance variable is not avaliable or too costly.

• 품질경영학회지
• /
• 제40권3호
• /
• pp.327-336
• /
• 2012

Purpose: In this study, we research the hurdle rate method to suggest the robust control chart for a contaminated process less vulnerable to fault values than existing control charts. Methods: We produce the results of p, ARL values to compare the performance of two control charts, $\bar{x}-s$ that has been used typically and TM-TS that is suggested by this paper. We implement the simulation focusing on three cases, change of deviation, mean and both of them. Results: We draw a conclusion that the TM-TS control chart has better efficiency than $\bar{x}-s$ control chart over the three cases. Conclusion: We insist that applying TM-TS control chart for a polluted process is more effective than $\bar{x}-s$ control chart.