• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.22 no.52
• /
• pp.211-219
• /
• 1999

Sleeping is important activity in bedroom and it takes one third of our lifetime. The body pressure distribution on bed has been considered as one of the most important factors affecting sleeping comfort. The measurement contact pressure has been applied to design seat, mattress, shoes, etc., for prevention of pressure sores and improvement of products. This paper discusses the recognizing rule of sleeping posture using contact pressure. Subjects' ages are ranged from twenties to fifties. They include 29 males and 35 females. Body pressure distribution is measured in the state of stable bed when subject lies on his/her back, on his/her side and on his/her face. We made recognizing rules of sleeping posture through statistical analysis; ANOVA and regression analysis, qualitative analysis.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.346.2-346.2
• /
• 2016

The rear side contact recombination in the crystalline silicon solar cell could be reduced by back surface field. We formed polycrystalline silicon as a back surface field through crystallization of amorphous silicon. A thin silicon oxide applied to the passivation layer. We used quasi-steady-state photoconductance measurement to analyze electrical properties with various annealing condition. And, blister formed on surface of wafer during the annealing process. We observed the blister after varied annealing process with wafer of various surface. Shape and density of blister is influenced by various annealing temperature and process time. As the annealing temperature became higher, the average diameter of blister is decreased and total number of blister is increased. The sample with the $600^{\circ}C$ annealing temperature and 1 min annealing time exhibited the highest implied open circuit voltage and lifetime. We predicted that the various shape and density of blister affects the lifetime and implied open circuit voltage.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2003.05a
• /
• pp.319-322
• /
• 2003

For the analysis of leveling process by the 3-dimensional elastic-plastic finite element method, a finite element analysis program modeling large deformation of shell has been developed. This program fur analyzing large deformation of sheet during leveling includes spring-back analysis as well as efficient contact treatment between sheet and rolls of leveler. This is verified by the simple leveling experiment with 5 rolls at laboratory. Besides the leveling examples, problems within the category of large strain and rotation, such as 3-dimensional roll-up and gutter occurrence at continuous bending-unbending process are also tested for verification of the program. The residual curvatures of strip predicted by finite element analysis are within 20% error range of the experiment. The formation and direction of anticlastic curvature or gutter during bending-unbending under tension is predicted and this agrees with the experimental results.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2003.03a
• /
• pp.126-126
• /
• 2003

유기트랜지스터에 관한 연구는 1980년 이후부터 시작되었으나 근래에 들어 전 세계적으로 본격적인 연구가 진행되고 있다. 제작공정이 간단하고 비용이 저렴하며 충격에 의해 깨지지 않고 구부리거나 접을 수 있는 전자 회로 기판이 미래의 산업에 필수적인 요소가 될 것으로 예상되고 있으며 이러한 요구를 충족시킬 수 있는 유기트랜지스터의 개발은 아주 중요한 연구분야로 대두되고 있다. 본 연구에서는 표면처리에 따른 contact angle, I-V 특성곡선, 표면 morphology 등의 결과로부터 dry cleaning 한 것이 wet cleaning한 것보다 왜 좋은지를 논하고자 한다. 먼저 N-type SiO$_2$ 기판을 이용하여 back면의 oxide층을 제거한 후, back gate용으로 사용하기 위하여 sputtering장치로 Au/Cr을 증차하였다. 그리고 기판에 앞면을 photolithography 공정을 이용하여 Au/Cr를 1000$\AA$ 증착 하여 source-, drain-eldctrode를 제조하였다. 그리고 SiO$_2$ 기판의 표면처리를 달리하여 그 위에 유기박막을 증착하여 특성을 비교하였다.

• Journal of the Speleological Society of Korea
• /
• no.75
• /
• pp.55-64
• /
• 2006

The extension of development and originality of the ability which is various leads and studying voluntary character and the ability back the education which it considers actively it raises and the infield it does. With activation plan of cave resources home page of Speleological Society of Korean like home page of Speleological Society of Japan cave crane information, caving information, cave Q/A, cave publication, the relation site back the possibility of seeing information regarding the cave which is various in order to be, it reorganizes. The possibility of coming in contact in order to be, various branch information also the general rain specialist regarding the cave resources. Currently the Possibility of seeing the various branch data for the application of the cave resources at any time it is, home page of Speleological Society of Korean the possibility of doing to lead in order to be, it proposes the plan. From one person it will be able to study the data regarding the cave of various field in order, all curricular materials regarding the cave resources the educational program which leads a home page about under developing it proposes the activation plan of the cave resources.

• Journal of the Korean Society for Railway
• /
• v.8 no.5
• /
• pp.490-494
• /
• 2005

The geometric parameters between wheel and rail change wheel/rail contact geometry characteristics, and this influence dynamic behavior of rolling stock. So, the selections of optimum geometric parameters between wheel and rail is important for planning of railway system. In this study, we have analyzed the influence of geometric parameters like wheel flange-back distance, gage, and rail inclination on the equivalent conicity relating to dynamic behavior. The analyses show the following results. The widening of wheel flange-back distanc, the decrement of gage increase the equivalent conicity and the increment of rail inclination show the sharp change of the equivalent conicity.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 1995.10a
• /
• pp.76-85
• /
• 1995

The general equation of homogeneous strin for tube drawing has been derived. This can be applied to the general tube drawing method for non-zero plug angle. Also, the derived equation can represent Blazynski's equations for the sinking and tube drawing with a constant plug diameter. The general tube drawing was divided into two steps, sinking and contact drawing zones. The derived equation can calculate the homogeneous strains of the two steps. The various tube drawing methods such as fixed tapered plug, fixed mandrel, fixed back tapered plug, and floating plug have been analysed by the equation and finite element analysis. From the FEM calculations, the total strains and drawing stresses are obtained and consequently the redundancy factor of various drawing methods was analysed. The fixed back tapered plug method showed the largest redundancy factor and the floating plug method had the largest drawing stress.

• Proceedings of the KSR Conference
• /
• 2004.10a
• /
• pp.430-434
• /
• 2004

The geometric parameters between wheel and rail change wheel/rail contact geometry characteristics, and this influence dynamic behavior of rolling stock. So, the selections of optimum geometric parameters between wheel and rail is important for planning of railway system. In this study, we have analyzed the influence of geometric parameters like wheel flange-back distance, gage, and rail inclination to the equivalent conicity relating dynamic behavior. The analyses show the following results. The widening of wheel flange-back distance increase the equivalent conicity, the widening of gage, rail inclination 1/20 compared with rail inclination 1/40 decrease the equivalent conicity.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.52 no.9
• /
• pp.448-453
• /
• 2003

In this paper the controlled closing algorithm of the circuit breaker for isolated capacitor banks is proposed. The characteristics of circuit breakers such as RDDS(rate of decrease of dielectric strength) and a mechanical operating tolerance should be also taken into account to locate contact touch instants around voltage zero. The analysis results on the voltages across circuit breaker terminals upon closing operation play an important roles to describe the suggested method. The simulations carried out in order to verify the performance of this method show that the closing instants obtained from the proposed method provide a good suppression effect on the closing transients for both single and back-to-back capacitor banks.

• Current Applied Physics
• /
• v.18 no.12
• /
• pp.1583-1591
• /
• 2018

We analysed perovskite $CH_3NH_3PbI_{3-x}Cl_x$ inverted planer structure solar cell with nickel oxide (NiO) and spiroMeOTAD as hole conductors. This structure is free from electron transport layer. The thickness is optimized for NiO and spiro-MeOTAD hole conducting materials and the devices do not exhibit any significant variation for both hole transport materials. The back metal contact work function is varied for NiO hole conductor and observed that Ni and Co metals may be suitable back contacts for efficient carrier dynamics. The solar photovoltaic response showed a linear decrease in efficiency with increasing temperature. The electron affinity and band gap of transparent conducting oxide and NiO layers are varied to understand their impact on conduction and valence band offsets. A range of suitable band gap and electron affinity values are found essential for efficient device performance.