• 한국안전학회지
• /
• 제13권1호
• /
• pp.131-138
• /
• 1998

This field study was conducted to survey the effect of seating ＆ lighting conditions on work. The results were as follows ; Discomfortable parts of body caused by unsuitable sitting postures on work were low back 52.05%, leg 15.75%, neck 14.38% and arm 9.59%. Work conditions of sitting postures were needed arm rest, back rest of seat and adjustable seat height. Effect of work efficiency by lighting conditions were statistically significant relationship between glaring state of workstation and lighting state.

• 전기학회논문지P
• /
• 제65권2호
• /
• pp.142-150
• /
• 2016

This paper developed new manufacture process technology of slim type flexible flat lighting product used lower power white LED. Flexible flat lighting is applied to letter sign lighting, traffic lighting, interior wall lighting, flat lighting, aquarium back lighting, wreath light etc. Main manufacture process technology were developed drawing software for electronics circuit, inkjet electronic circuit pattern and inkjet white ink coating. For pattern printing it was utilized for piezoelectonic inkjet head printing technology. Also high vacuum pressure laminating technology was waterproofing for LED flat lighting protection. Hence, form process technology we were manufactured for flexible flat lighting product of the power 12 W, input voltage 48 V and plane size $480{\times}480mm$. It acquired a these validity from experiment results.

• 한국의류학회지
• /
• 제35권3호
• /
• pp.292-303
• /
• 2011

This research suggested a draft proposal for a smart jacket design, which has applied wearable technologies to provide convenience in daily life. The smart jacket combined with a vest was the casual item for autumn and winter. The heating device was composed of the heating element, battery, controller, electric wire, connector, switch, and charger. A stable electronic conductor fiber of good heating effect with a flexible zigzag form has been selected for the heating element. The lighting device has been made in a way that attaches the LED and its power controller in the same mechanical device. As the result of the wearing test, the heating effect turned out to be effective in the order of: back, both the back and abdomen and only the abdomen. When wearing a smart jacket, the back and abdomen have been selected as favorable body parts for heating. Pockets and hems are selected as the adequate place to attach the LED lighting, and the brightness of LED lighting has turned out to be suitable and useful. Based on the test results, the first draft proposal has attached the heating element only in the back and its controller located in the inside pocket of the vest. In addition, the LED has been attached to the front pocket of the jacket. As to the second draft proposal, heating elements have been placed in the back and the abdomen. Each controller for the heating elements has been placed in the front and inside pocket of vest, and the LED lighting has been attached to the hem of the jacket. The smart jacket combined with a wearable device was assessed by functioning categories. The user showed a high satisfaction in the heating and illuminating function of a smart jacket.

• 한국정보기술학회 영문논문지
• /
• 제9권2호
• /
• pp.75-87
• /
• 2019

This paper presents a fully digital controlled power supply unit for the wireless controlled dimmable LED lighting system. The proposed power supply designed using a fly-back converter, which is directly controlled by a microprocessor. Although the proposed circuit does not sense the AC input current and has not AC input voltage feed-forward, it can achieve a high power factor. The proposed power supply directly regulates the output power for LED loads using the PWM and PFM control of the fly-back converter without additional regulator. For a wireless remote control function, the Zigbee modem is equipped in the proposed power supply. A prototype set-up has been built and tested. Through the experiment with a prototype set-up, the usefulness of the proposed power supply is verified.

• 한국실내디자인학회논문집
• /
• 제21권6호
• /
• pp.129-136
• /
• 2012

As the importance of eco-friendly and energy saving issues are emphasized in lighting as consciousness about energy saving is elated worldwide, demand for natural resources such as gas increases, supply of LED lighting is spread. Owing to white LED's development and price fall. It is expected to LED High Luminance Emitting Diode. LED's brightness and long life-time that surpass fluorescent light in the latest as well as is used by back light source of thin film LCD, low electric power attrition rate by advantage do and widen the market at the world lighting lamp market that is potential market. Accordingly, study about suitability of LED lighting is activated but space that apply actual LED lighting fixtures yet is less and advanced researches about LED fixtures' applied apaces are slight compared to existing light source up to now because is not many on this. The result of the experiment shows similar tendency with the existing light sources'. Through a psychological reaction experiment in the LED lighting experiencing space that can control of color temperature and lighting level, this study is wished to use to the data for lighting design of space that LED lighting fixtures are applied hereafter.

• 한국정보통신학회논문지
• /
• 제7권4호
• /
• pp.725-729
• /
• 2003

본 논문에서는 LCD 후면 광원용 한 쌍의 형광층, 방전용기 및 대향전극을 갖는 무수은 평판형광램프에 대하여 연구하였다. 구동 전압이 인가되면 균일한 방전이 램프 전체에 걸쳐서 발생한다. 방전개시전압은 가스 압력에 따라 증가한다. 이와 같은 경향은 방전 가스 압력의 증가에 의한 평균자유행정의 감소에 기인된 것으로 생각된다. 녹색 발광 평판형광램프에서 최대 2700[cd/m2]의 휘도를 얻었다.

• 한국신뢰성학회지:신뢰성응용연구
• /
• 제11권1호
• /
• pp.17-30
• /
• 2011

Many domestic manufacturers make reflectors for Lamps of BLU(back light units). However, color change and parting occur as a result of diverse usage environment. Therefore, many of the manufacturers are reluctant in R&D investment of reflectors for Lamps of BLU. Hence, in this article reliability assessment criteria for reflector for lamp of BLU are established in terms of performance test, environment test and life test.

• 전력전자학회논문지
• /
• 제11권3호
• /
• pp.201-208
• /
• 2006

최근 에너지 절약에 대한 관심이 고조되면서 기존 광원보다 효율이 좋은 광원개발이 계속되고 있으며 그 대표적인 것이 고효율 및 고출력(high-power) LED이다. 고출력 LED의 개발로 인해 일부에서는 일반 조명용으로 사용하려는 연구가 진행 중이며 풍력과 태양광 발전을 이용한 야간 조명용 전원으로 사용하려는 연구도 진행되고 있다. 이에 본 논문에서는 조명용 광원으로 직류 전원을 이용한 고출력 LED의 사용 가능성을 확인하고자 하며 기존 방식에 비하여 보다 안정적이고 효율이 좋은 새로운 LED 전원구동장치를 제안한다. 제안된 방식은 기존 방식보다 리액터의 크기를 줄일 수 있었으며 효율이 개선됨을 확인하였다.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2008년도 춘계학술대회 논문집
• /
• pp.126-129
• /
• 2008

최근 들어 기존 조명기구를 대신하여 LED 조명기구가 크게 각광을 받고 있다. 이는 LED의 장점인 낮은 소비전력과 긴 수명 때문인 것으로 생각된다. 하지만, 빛을 확산시켜야 하는 조명관점에서 본다면 LED 조명기구에도 개선해야 할 부분도 많아지는 것도 사실이다. 본 논문에서는 LED 조명기구에서 빛의 확산을 위해 사용되어지는 고가의 반사판에 대해 실제 개발된 조명기구의 배광곡선 분석과 시뮬레이션을 통해 확산효과를 면밀히 분석함으로써 향후 LED 조명기구의 설계에 있어서 기술 및 경제적 관점에서 도움을 주고자 한다.

• 조명전기설비학회논문지
• /
• 제24권5호
• /
• pp.8-15
• /
• 2010

조명은 공간을 비추는 기본적인 기능 외에 진보된 기술과 디자인으로 다양한 연출 효과와 함께 공간에 효율성을 좌우한다. 공간의 효율성에 적합한 조명설계는 공간의 입지적 여건과 램프 특성에 따라 설계되어질 때 가능해진다. 특히, 특수공간의 조명설계는 공간적 특수성을 감안하여 사전 분석과 검토가 요구된다. 따라서 본 연구에서는 방폐장 터널의 공간적 특수성을 감안한 조명환경을 위하여 사전의 조명설계와 시뮬레이션을 통한 적합성 검토를 하고자 한다. 이에 무전극형광램프를 제안하며 방폐장 터널의 입지현황에 따라 구간별 조명설계 기준과 구성을 제시하고 이를 통한 조명설계를 바탕으로 시뮬레이션 분석을 하여 적합성 검토한다.