• 한국세라믹학회지
• /
• 제28권5호
• /
• pp.359-364
• /
• 1991

The effects of Pb5Ge3O11 on the sinterbility and lattice variation of the semiconducting 0.15 mol% Y2O3 doped BaTiO3 have been investigated as functions of additive contents (from 0.25 mol% to 2.5 mol%) and sintering temperatures (from 110$0^{\circ}C$ to 130$0^{\circ}C$). As the amount of Pb5Ge3O11 increases, the sinterbility of BaTiO3 increases abruptly at around 115$0^{\circ}C$. During the sintering, the most of Pb+2 ions in additives penetrate into BaTiO3 lattices and Ge+4 ions present at grain boundaries. Therefore the c lattice of the BaTiO3 increases largely and then the tetragonality increases due to the diffusion of the Pb+2 ions.

• 분석과학
• /
• 제15권1호
• /
• pp.15-19
• /
• 2002

텅스텐이 첨가된 $BaTiO_x$계 세라믹재료 중 Ba, Ti 및 W의 회수율을 증가시키기 위하여 가압 산 분해법을 이용하여 전처리하였다. $BaTiO_x$계 세라믹재료 시료를 가압 산 부내장치 내에서 HF : HCI ( 1 : 2 ) 혼합산을 가하여 $220^{\circ}C$에서 3시간동안 분해시킨 후 ICP-AES를 이용하여 Ba, Ti 및 W을 정량하였다. 그 결과 Ba는 99.6% Ti는 99.8% W는 99.2%의 회수율과 Ba는 1.02% Ti는 0.73% W는 1.79%의 C.V.값을 각각 얻었다. 이 전처리 방법을 실제시료에 적용하여 25.9% Ba38.8% Ti과 3.31% W 함량을 각각 구할수 있었다.

• 한국결정성장학회지
• /
• 제20권6호
• /
• pp.278-282
• /
• 2010

Tm 도핑에 따른 $BaTiO_3$ ceramics의 전기적 특성과 열화 거동에 미치는 영향에 대하여 core-shell 형성과 가속열화시험에 의한 미세화학변화의 관점에서 연구하였다. $Tm_2O_3$를 첨가하지 않은 $BaTiO_3$와 1 mol%를 첨가한 $BaTiO_3$를 펠렛과 적층 형태의 시편으로 각각 제조하였다. 1 mol% $Tm_2O_3$가 첨가된 유전체 시편의 유전상수는 $Tm_2O_3$를 첨가하지 않은 시편에 비해 약 40% 높게 나타났고 X7R 조건을 만족하였다. 절연저항 또한 1 mol% $Tm_2O_3$가 첨가된 시편은 $5.43{\times}10^{10}{\Omega}$으로 $Tm_2O_3$를 첨가하지 않은 시편의 $1.11{\times}10^{10}{\Omega}$보다 높게 나타났다. 이는 $Tm^{3+}$ 이온이 Ba site와 Ti site에 선택적으로 치환되고 유전체 미세조직 내에 core-shell 구조를 형성하여 전기적 특성을 향상시킨 것으로 설명된다. 각각의 조성에 따라 제조된 적층 시편의 $150^{\circ}C$, 70 V, 24시간 가속열화시험결과에 따르면, 1 mol% $Tm_2O_3$가 첨가된 $BaTiO_3$는 첨가되지 않은 시편에 비해 전극 층으로의 산소확산이 감소됨을 확인하였고, 이는 $Tm^{3+}$ 이온의 Ti site 치환에 의해 발생한 산소공공이 Ni 전극과 반응할 수 있는 과잉 산소를 줄여주기 때문으로 판단된다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 하계학술대회 논문집 C
• /
• pp.1491-1493
• /
• 2002

The 0.5$Ba_2Ti_9O_{20}$-0.5Mg$TiO_3$ ceramics were prepared by the conventional mixed oxide method. The structural properties were investigated with sintering temperature by XRD. According to the X-ray diffraction patterns, major phases of the 0.5$Ba_2Ti_9O_{20}$-0.5Mg$TiO_3$ ceramics were coexisted. Also the secondary phase of Mg$Ti_2O_5$, Ba$Mg_6Ti_6O_{19}$ and the unreacted $TiO_2$ phase were existed. In the case of 0.5$Ba_2Ti_9O_{20}$-0.5Mg$TiO_3$ ceramics sintered $1350^{\circ}C$, dielectric constant, quality factor and temperature coefficient of resonant frequency were 33.7, 54,900GHz, -12.5ppm/$^{\circ}C$, respectively.

• 한국재료학회지
• /
• 제17권10호
• /
• pp.548-554
• /
• 2007

[ $BaTiO_3$ ] thick film by an interfacial polymerization method was prepared at the liquid/liquid interface between benzyl alcohol saturated solution with the basic catalyst [diethyl amine ($NHEt_2$) or triethylamine ($NEt_3$)], and the water dissolved with $TiO_2$ and $Ba(CH_3COO)_2$. The film thickness increased gradually with an increase in diethyl amine($NHEt_2$) or triethylamine($NEt_3$) volume and the reaction time. The homogeneity of $BaTiO_3$ thick film after sintered at $600^{\circ}C$ was confirmed by EPMA analysis, which showed that both of Ba and Ti element were homogeneously distributed on the surface as well as in the perpendicular direction of the film. The thickness of $BaTiO_3$ film obtained by this process was $8.75\;{\mu}m$.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1988년도 추계학술대회 논문집
• /
• pp.8-11
• /
• 1988

(1-x-y)Pb($Zn_{1/3}Nb_{2/3})0_3-BaTiO_3PbTiO_3(0.05{\leq}x{\leq}0.20, 0.05{\leq}y{\leq}0.15$) ternary compound ceramics were fabricated by the mixed oxide method. The dielectric properties with temperature and frequency of the specimens were investigated. Relative dielectric constants of the specimens were increased with $BaTiO_3$ contents. Increasing the $BaTiO_3$contents, the variation in the relative dielectric constant with frequency, the temperature coefficient of capacitance (TCC) and the dielectric loss were decreased.

• 한국세라믹학회지
• /
• 제40권12호
• /
• pp.1177-1182
• /
• 2003

BaTiO$_3$ 분말에 흑연 분말을 첨가하여 BaTiO$_3$계 가스센서용 다공성 감지물을 제조하였으며, 이 감지물의 결정구조와 미세구조를 연구하였다. 이 감지물 소성체는 정방정 perovskite 결정구조를 가지고 있었다 흑연 분말의 첨가량이 증가함에 따라 소성체의 기공도가 증가하였다. 이것은 소성 시 흑연 분말과 산소가 발열반응하여 CO 및 $CO_2$ 가스를 생성하고, 이 가스가 휘발하였기 때문이라고 생각된다. 제조한 BaTiO$_3$계 소성체는 대기에서 측정한 저항과 CO 가스에서 측정한 저항이 고온( >∼20$0^{\circ}C$)에서 큰 차이를 나타내고 있으며 온도가 증가함에 따라 차이가 커짐을 관찰하였다. 소성체 기공도의 증가에 따른 반응 site의 증가로 인하여 소성체의 표면흡착기인 $O_2$$^{-}$와 CO 가스의 반응과, 소성체에 있는 $O^{-}$와 CO 가스의 반응이 활발하기 때문에 CO 가스의 민감도가 크게 증가하였다. 본 연구에서 제조된 다공성 BaTiO$_3$계 세라믹스는 CO 가스센서의 감지물 재료로써 유망하다고 생각된다.

• 한국분말재료학회지
• /
• 제28권2호
• /
• pp.127-133
• /
• 2021

One-dimensional (1D) piezoelectric nanostructures are attractive candidates for energy generation because of their excellent piezoelectric properties attributed to their high aspect ratios and large surface areas. Vertically grown BaTiO₃ nanotube (NT) arrays on conducting substrates are intensively studied because they can be easily synthesized with excellent uniformity and anisotropic orientation. In this study, we demonstrate the synthesis of 1D BaTiO₃ NT arrays on a conductive Ti substrate by electrochemical anodization and sequential hydrothermal reactions. Subsequently, we explore the effect of hydrothermal reaction conditions on the piezoelectric energy conversion efficiency of the BaTiO₃ NT arrays. Vertically aligned TiO₂ NT arrays, which act as the initial template, are converted into BaTiO₃ NT arrays using hydrothermal reaction with various concentrations of the Ba source and reaction times. To validate the electrical output performance of the BaTiO₃ NT arrays, we measure the electricity generated from each NT array packaged with a conductive metal foil and epoxy under mechanical pushings. The generated output voltage signals from the BaTiO₃ NT arrays increase with increasing concentration of the Ba source and reaction time. These results provide a new strategy for fabricating advanced 1D piezoelectric nanostructures by demonstrating the correlation between hydrothermal reaction conditions and piezoelectric output performance.

• 한국세라믹학회지
• /
• 제46권2호
• /
• pp.181-188
• /
• 2009

The electrical property and microstructure in $BaTiO_3$ ceramics doped rare-earth ions with intermediate ionic size ($Dy^{3+},Ho^{3+},Y^{3+}$) were investigated. Microstructures have been characterized using scanning electron microscopy (SEM), transmission electron microscopy (TEM) and X-ray diffraction (XRD). Incorporation of rare-earth ions to $BaTiO_3$ ceramics depended on their ionic radius sensitively. Compared to Ho and Y ions, Dy ions provide $BaTiO_3$ ceramics with the high rate of densification and well-developed shell formation, due to their high solubility in the $BaTiO_3$ lattice, but the microstructure of Dy doped $BaTiO_3$ ceramics is unstable at high temperature, because Dy ions could not play a role of grain growth inhibition, leading to diffuse into $BaTiO_3$ lattice continuously after completion of densification during sintering. Comparing electrical property and microstructure, it is shown that the reliability of capacitor improved by high shell ratio.

• 한국전기전자재료학회논문지
• /
• 제27권6호
• /
• pp.367-371
• /
• 2014

We investigated dielectric relaxation properties of $0.95(Na_{0.5}K_{0.5})NbO_3-0.05BaTiO_3$ ceramics by addition (0~0.3 wt%) of $(Ba,Ca)SiO_3$ glass frit. All composition of $0.95(Na_{0.5}K_{0.5})NbO_3-0.05BaTiO_3$ added $(Ba,Ca)SiO_3$ glass frit showed the same crystallographic properties, coexistence of orthorhombic and tetragonal phase. By increasing addition of $(Ba,Ca)SiO_3$ glass frit, the Curie temperatures of $0.95(Na_{0.5}K_{0.5})NbO_3-0.05BaTiO_3$ ceramics were decreased, whereas maximum dielectric constants of $0.95(Na_{0.5}K_{0.5})NbO_3-0.05BaTiO_3$ ceramics were dramatically increased. Especially the deviations of Curie temperature $0.95(Na_{0.5}K_{0.5})NbO_3-0.05BaTiO_3$ ceramics were increased by increasing amount of $(Ba,Ca)SiO_3$ glass frit, and it indicated that $0.95(Na_{0.5}K_{0.5})NbO_3-0.05BaTiO_3$ ceramics added $(Ba,Ca)SiO_3$ glass frit have relaxor characteristics.