• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 제37회 하계학술대회 논문집 C
• /
• pp.1353-1354
• /
• 2006

The dielectric properties of $Ba_{0.5}Sr_{0.5}TiO_3$(BST) and MgO-doped BST ceramics were investigated for tunable microwave applications by sol-gel method. The effects of MgO mixing with BST. It is observed that Mg substitution into BST causes a shift in the cubic-tetragonal BST Phase transition peak to a lower temperature. MgO-substituted BST and MgO-mixed phases exhibit homogeneous and broadened BST phase transition peaks. Mg substitution into BST has a significant effect on the grain sife reduction. Dielectric constant and loss is inhanced with decrease MgO dopant.

• 전자공학회논문지A
• /
• 제33A권6호
• /
• pp.120-126
• /
• 1996

In the present study, we have studied on the characteristics of BST thin films with various Ba/Sr ratios by using sol-gel method. Barium-acetate, strontium-acetate and titanium isopropoxide are used as starting materials to fabricate BST thin films by sol-gel method. The fabrication conditions are estabilished through the TG-dT analyses and XRD measurements. BST thin films with the Ba/Sr ratios of 90/10, 70/30, 50/50 and 30/70 were deposited on the Pt/Ta/SiO$_{2}$Si substrate with the estabilished sol-gel process, and their characteristics were examined. The relative permittivity and the leakage current density at 5V vary from 287 to 395 and from 2.3 to 220${\mu}$A/cm$^{2}$, respectively, with various Ba/Sr ratio. Among the films investigatd in this research, BST (70/30) thin film shows the best relative permittivity and dielectric loss of BST (70/30) thin film are 395 and 0.045, respectively and the leakage current density at 5V is 2.3${\mu}$A/cm$^{2}$.

• 한국전기전자재료학회논문지
• /
• 제11권9호
• /
• pp.711-717
• /
• 1998

BST(70/30) and BST(50/50) thin films were prepared by Sol-Gel method and studied about the microstructural and dielectric properties with Pt and ITO bottom electrodes. The stock solution was synthesized and spin coated on the Pt/Ti$SiO_2$/Si and Indium Tin Oxide(ITO)/ glass substrate. the coated films were dries at 350$^{\circ}C$ for 10 minutes and annealed at $750^{\circ}C$ for 1 hour for the crystallization. The thin films coated on ITO substrate were crystallized easily and the packing density and roughness of surface were better that those of films coated on Pt substrates. In the BST(50/50) composition the structural properties were similar to the BST(70/30) composition and grain size were decreased with increasing the contents of Sr. The dielectric constant was higher in the BST(50/50) composition compared with the BST(70/30) composition. Using the ITO substrate, the dielectric constant was higher than the Pt substrate while the dielectric loss was showed a reverse trend. The dielectric constant with and increase of temperature was decreased slowly.

• 한국세라믹학회지
• /
• 제40권2호
• /
• pp.198-205
• /
• 2003

R.F. Magnetron Sputtering법을 이용하여 Pt/Ti/ $SiO_2$/Si기판 위에 seed-layers와 $Ba_{0.66}$S $r_{0.34}$Ti $O_3$박막을 제조하였다. 다양한 기판온도에 따른 BST 박막의 전기적인 특성(정전용량과 누설전류)과 seed-layer층이 BST 박막에 미치는 영향을 조사하였다. BST 박막은 seed-layer층을 삽입함으로써 박막의 결정성이 향상되었고, 박막의 기판온도(결정화온도)도 상당히 낮출 수 있었다. 순수한 BST에 비하여 seed-layer를 삽입한 BST는 높은 유전상수와 낮은 유전손실 및 낮은 누설전류를 가지는 우수한 전기적 특성을 나타내었다. BST 박막의 전기적 특성은 기판온도에 따라 영향을 받고, seed-layer에 의해 향상됨을 알 수 있었다.

• 화약ㆍ발파
• /
• 제41권3호
• /
• pp.73-92
• /
• 2023

가스 폭발의 위험성의 증대와 함께 가스 폭발의 규모와 영향을 예측하는데 필요한 폭발 인자들을 간접적으로 추정하는 방법들이 사용되고 있다. 본 연구에서는 주로 사용되고 있는 TNT 등가량 산정법, TNO 다중에너지 방법, BST 방법의 특성과 폭발 인자를 결정하는 과정을 비교하였다. TNT 등가량 산정법의 경우, 증기운 폭발의 형태와 폭발 물질 등 다양한 조건에 따라 적합한 efficiency factor를 선택하는 것이 필요하였다. TNO 다중에너지 방법은 클래스 번호를 결정하기 위한 객관적 기준이 부족하였으며 음의 과압을 추정하지는 못하였다. 기 보고된 인자값에 오기재로 보이는 부분을 확인하였으며 수정된 인자값을 제시하였다. BST 방법은 음의 과압을 포함한 보다 상세한 폭발 인자 추정이 가능하지만 사용하는 그래프가 가시적이지 않은 문제점이 있었다. 이를 보완하기 위해 그래프를 재작성하였으며 향후 그래프의 수식화를 통한 편리한 폭발 인자 추정이 가능할 것으로 기대된다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 춘계학술대회 논문집 센서 박막재료 반도체재료 기술교육
• /
• pp.107-110
• /
• 2002

The optical memory devices of BST thin films to composite $(Ba_{0.7}\;Sr_{0.3})TiO_{3}$ using sol-gel method were fabricated by changing of the depositing layer number on $Pt/Ti/SiO_{2}/Si$ substrate. The structural properties of optical memory devices to be ferroelectric was investigated by fractal analysis and 3-dimension image processing. The thickness of BST thin films at each coating numbers 3, 4 and 5 times was $2500[\AA]$, $3500[\AA]$ and $3800[\AA]$. BST thin films exhibited the most pronounced grain growth. The surface morphology image was roughness with coating numbers. The thin films increasing with coating numbers shows a more textured and complex configuration.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 하계학술대회 논문집
• /
• pp.660-663
• /
• 2001

The devices of BST thin films to composite (Ba$\_$0.7/ Sr$\_$0.3/)TiO$_3$using sol-gel method were fabricated by changing of the depositing layer number on Pt/Ti/SiO$_2$/Si substrate. The thin film capacitor to be ferroelectric devices was investigated by structural and electrical properties. The thickness of BST thin films at each coating numbers 3, 4 and 5 times was 2500[${\AA}$], 3500[${\AA}$], 3800[${\AA}$]. The dielectric factor of thin film when the coating numbers were 3, 4 and 5 times was 190, 400 and 460 on frequency 1[MHz]. The dielectric loss of BST thin film was linearly increased by increasing of the specimen area.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2006년도 하계학술대회 논문집 Vol.7
• /
• pp.296-297
• /
• 2006

A conventional oxide method was used to fabricate $Ba_{0.5}Sr_{0.5}TiO_3$(BST) ceramic plates doped by MgO from 10 to 60 wt%. The structural and dielectric properties of BST were investigated as a fraction of MgO dopant concentration. The dielectric properties of the MgO doped BST were strongly dependent on the MgO contents. The dielectric constant and dielectric loss of MgO doped BST decreased with increasing MgO content.

• 한국세라믹학회지
• /
• 제34권8호
• /
• pp.803-810
• /
• 1997

Ba0.5Sr0.5TiO3박막을 RF 마그네트론 스퍼터링법을 이용하여 Pt/Ti/SiO2/Si(100) 기판에 증착하였다 .누설전류에 영향을 주는 것으로 알려진 열처리 조건, dopant 효과 등을 평가하고자 이온반경이Ti와 유사하고 대부분이 Ti 자리를 치환하는 것으로 알려진 Nb와 Al을 각각 danor와 acceptor로 선택하여 BST 박막에 첨가한 후 누설전류를 측정하였다. 고온에서 in-situ 증착된 BST 박막은 거친 표면 형상을 보이며 낮은 전압에서 파괴가 발생하고, Nb 첨가로 누설전류가 증가하였다. 삼온 증착후 후열처리된 박막은 표면 형상도 평할도가 증가하였으며 in-situ로 제조된 박막에 비해 높은 파괴전압과 낮은 누설전류를 나타내었다. 특히 Al이 첨가된 BST 박막의 누설전류밀도는 ~10A/cm2로 도핑을 하지 않은 박막이나 Nb가 첨가된 박막에 비해 매우 낮은 누설전류밀도를 나타내었으며, 이는 산화로 인한 산소공공의 감소, 이동 가능한 hole의 감소와 후열처리과정중 계면 및 입계의 산화로 Schottky 장벽에 높아진 결과로 판단된다.

• Transactions on Electrical and Electronic Materials
• /
• 제7권2호
• /
• pp.67-71
• /
• 2006

In this paper, we have investigated the structure and dielectric properties of the $(Ba_{0.6}Sr_{0.4})TiO_3$ (BST) thin films fabricated on MgO(100)/Si substrate by an alkoxide-based sol-gel method. Both the structure and morphology of those films were analyzed by x-ray diffraction (XRD) and atomic force microscope (AFM). For the MgO(100)/Si substrate, the BST thin films exhibited highly (100) orientation. The highly (100)-oriented BST thin films showed high dielectric constant, tunability, and figure of merit (FOM). The dielectric constant, dielectric loss and tunability of the BST thin films annealed at $700^{\circ}C$ deposited on the MgO(100)/Si substrate measured at 10 kHz were 515.9, 0.0082, and 54.3%, respectively.