• Proceedings of the KSR Conference
• /
• 2005.05a
• /
• pp.776-781
• /
• 2005

In this paper, using received channel information, we analyze performance in MIMO multiuser system in low-to-medium mobile speed by selecting each user's constellations, powers, and transmit antennas. Given a target of symbol error, we determine each user's constellations, powers, selected tranprobability smit antennas such that the required signal-to-noise(SNR) is minimized for MMSE, V-BLAST receiver according to each user's information and channel estimation information. When we do power control with antenna selection technique through uplink channels of MIMO system in low-to-medium mobile speed, we analyze system performance with wireless channel information from Base-Station(BS) to Users. By simulation, it has been shown that the proposed antenna selection scheme for transmitting data offer better performance improvement than all transmit antennas for transmitting data.

• Journal of Communications and Networks
• /
• v.7 no.4
• /
• pp.471-477
• /
• 2005

This paper proposes an efficient constraint-based optimization model for the design of 3G mobile networks, such as universal mobile telecommunications system (UMTS). The model concerns about finding a set of sites for locating radio network controllers (RNCs) from a set of pre-defined candidate sites, and at the same time optimally assigning node Bs to the selected RNCs. All these choices must satisfy a set of constraints and optimize an objective function. This problem is NP-hard and consequently cannot be practically solved by exact methods for real size networks. Thus, this paper proposes a hybrid search strategy for tackling this complex and combinatorial optimization problem. The proposed hybrid search strategy is composed of three phases: A constraint satisfaction method with an embedded problem-specific goal which guides the search for a good initial solution, an optimization phase using local search algorithms, such as tabu algorithm, and a post­optimization phase to improve solutions from the second phase by using a constraint optimization procedure. Computational results show that the proposed search strategy and the model are highly efficient. Optimal solutions are always obtained for small or medium sized problems. For large sized problems, the final results are on average within $5.77\%$ to $7.48\%$ of the lower bounds.

• Steel and Composite Structures
• /
• v.37 no.1
• /
• pp.1-14
• /
• 2020

Composite beams with corrugated steel webs represent a new innovative system which has emerged in the past decade for medium span in the construction technology. The use of composite beams with corrugated steel webs results in a range of benefits, including flexible spaces and reduced foundation costs in the construction technology. The thin corrugated web affords a significant weight reduction of these beams, compared with hot-rolled or welded ones. In the current research, an optimal designed I-girder beam with corrugated web has been proposed to improve the structural performance of continuous composite girder under bending moment. The experimental program has been conducted for six simply supported composite beams with different loading conditions. The tested specimens are designed by using one of the stochastic techniques called hunting search algorithm. In the optimization process, besides the thickness of concrete slab and studs, corrugated web properties are considered as design variables. The design constraints are respectively implemented from Eurocode 3, BS-8110 and DIN 18-800 Teil-1. The last part of the study focuses on performing a numerical study on composite beams by utilizing finite element analysis and the bending behavior of steel girders with corrugated webs experimentally and numerically verified the results. A nonlinear analysis was carried out using the finite element software ANSYS on the composite beams which were modelled using the elements ten-node high order quadrilateral type.

• Atmosphere
• /
• v.22 no.3
• /
• pp.287-298
• /
• 2012

The predictability of heavy precipitation over the Korean Peninsula is studied using THORPEX Interactive Grand Global Ensemble (TIGGE) data. The performance of the six ensemble models is compared through the inconsistency (or jumpiness) and Root Mean Square Error (RMSE) for MSLP, T850 and H500. Grand Ensemble (GE) of the three best ensemble models (ECMWF, UKMO and CMA) with equal weight and without bias correction is consisted. The jumpiness calculated in this study indicates that the GE is more consistent than each single ensemble model. Brier Score (BS) of precipitation also shows that the GE outperforms. The GE is used for a case study of a heavy rainfall event in Korean Peninsula on 9 July 2009. The probability forecast of precipitation using 90 members of the GE and the percentage of 90 members exceeding 90 percentile in climatological Probability Density Function (PDF) of observed precipitation are calculated. As the GE is excellent in possibility of potential detection of heavy rainfall, GE is more skillful than the single ensemble model and can lead to a heavy rainfall warning in medium-range. If the performance of each single ensemble model is also improved, GE can provide better performance.

• KSBB Journal
• /
• v.6 no.4
• /
• pp.369-377
• /
• 1991

The effects of nitrogen sources(sodium glutamate and peptone) on the production of xanthan gum were investigated. The fermentation using sodium glutamate as a nitrogen source is longer than that of peptone. In the initial nitrogen concentration of 0.4-1.0g/L, Bs was about 2.0 and ${\beta}$s was 1.2. The optimal yields were obtained when the carbon source/nitrogen concentration was 10-16. The fermentation time and product yields in the fermentation medium of mixed nitrogen source [sodium glutamate-N(0.75g/L)+peptone-N(0.25g/L)] were similar to those of peptone.

• Structural Engineering and Mechanics
• /
• v.83 no.3
• /
• pp.387-400
• /
• 2022

The practice of using encased steel-concrete columns in medium to high-rise structures has expanded dramatically in recent years. The study evaluates existing methodologies and codal guidelines for estimating the ultimate load-carrying characteristics of concrete-encased short columns experimentally. The present condition of composite column design methods was analyzed using the Egyptian code ECP203-2007, the American Institute of Steel Construction's AISC-LRFD-2010, Eurocode EC-4, the American Concrete Institute's ACI-318-2014, and the British Standard BS-5400-5. According to the codes, the axial load carrying characteristics of both the encased steel and concrete sections was examined. The effect of load-carrying capacities in different forms of encased steel sections on encased steel-concrete columns was studied experimentally. The axial load carrying capacity of twelve concrete-encased columns and four conventional reinforced columns were examined. The conclusion is that the confinement was not taken into account when forecasting the strength and ductility of the encased concrete, resulting in considerable disparities between codal provisions and experimental results. The configuration of the steel section influenced the confining effect. Better confinement is achieved with the laced and battened section than with the infilled steel tube reinforced and conventionally reinforced section. The ECP203-2007 code reported the most conservative results of all the codes used.

• Korean Journal of Agricultural Science
• /
• v.4 no.1
• /
• pp.105-111
• /
• 1977

Inhibitory effect of sugars on lipase production by Trichosporon cutaneum was observed in the previous study (Kim, 1972), and inhibition was distinctive by the addition of glucose, fructose, mannose, xylose and arabinose to the soybean meal medium among various carbon sources. These experiments were carried out to study the effect of sugars on cell growth and lipase production by the strain using the soybean extracts liquid medium under a shaking culture system. Changes in color and pH of the medium were caused by heat sterilization when various sugars were added. To elucidate the possible effect of these coloring matters on lipase production and cell growth: changes in pH of the culture, cell concentration and level of the enzyme activities were determined when the culture was grown for 48 hours at $30^{\circ}C$ on a reciprocal shaker. The results obtained were as follows: 1. Density of brownish color which formed during heat sterilization was varied with the variety of sugar used, ie, strong in pentose such as xylose: weak in hexose such as galactose, mannose, glucose: very weak in disaccharide such as maltose, sucrose. When the color density was stronger, decrease in pH after sterilization was marked. 2. Cell growth and lipase production was not so effect by the coloring matters as by sugars. 3. The more the cell mass of the culture, the lower the level of lipase production in the culture supernatant. 4. Among the sugars which caused the distinctive inhibition of lipase production, a slight relief of inhibition was noticed by the addition of xylose, whereas the cell growth was repressed. 5. When cell growth was better, decrease in pH of the medium was greater during cultivation.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.46 no.3
• /
• pp.279-288
• /
• 2017

This study investigated the manufacturing of fermented soybean oil using a fermenting strain commonly processed for soybeans [Bacillus amyloliquefaciens (BA), Bacillus subtilis (BS), Lactobacillus acidophilus (LBA), and B. subtilis+L. acidophilus (BLO)] and evaluated its anti-obesity activities. Cytotoxicity of four kinds of fermented soybean oils was not observed in 3T3-L1 preadipocytes at 10 and $50{\mu}g/mL$. Triglyceride content was reduced by 20.6% in the BLO group at a treatment concentration of $50{\mu}g/mL$. The simultaneous treatment of fermented soybean oil and differentiation induction medium decreased $PPAR{\gamma}$ and $C/EBP{\alpha}$ gene expression at a concentration of $50{\mu}g/mL$ and blocked adipocyte differentiation by increasing adiponectin gene expression. The inhibitory effect of adipocyte differentiation was greatest in the BLO group. C57BL/6J mice were examined for 4 weeks after being separated into seven groups [normal diet group (N), high fat diet group (C), group fed high fat diet combined with regular soybean oil (SO), group fed non-fermented soybean oil (NF), and groups fed high fat diet combined with 5% fermented soybean oil (BA, BS, LBA, and BLO)] to identify the effects of soybean oil on body weight, serum lipid, adiponectin, insulin, and leptin levels in mice with high fat diet-induced obesity. The body weight and serum lipid level of the C group increased drastically compared to those of the N group. In contrast, the group fed a diet combined with fermented soybean oil showed decreases in weight, serum total cholesterol, LDL-cholesterol, and triglyceride levels compared to those of the C group. Moreover, soybean oil was found to be effective in the BLO group. In conclusion, fermented soybean oil has positive effects in prohibiting adipocyte differentiation increased by high fat diet and improving serum lipid composition. Therefore, fermented soybean oil can be used as a functional food material with anti-obesity activity.

• The Korea Journal of Herbology
• /
• v.37 no.4
• /
• pp.31-38
• /
• 2022

Objectives : In this study, we investigated the synergistic protective effects of medicinal herbal mixture (HME) including Mori Ramulus (MR), Acanthopanacis Cortex (AC), Eucommiae Cortex (EC), and Black soybean (BS) in C2C12 cells, mouse myoblasts. Methods : Effects of HME on cell viability of C2C12 myoblasts were monitored by MTT assay. Anti-atrophic activity of HME was determined in myoblasts and myotubes under oxidative stress by H₂O₂. C2C12 myoblasts were differentiated into myotubes in a medium containing 2% horse serum for 6 days. After that, we measured that expression of MyoD and myogenine, the myogenic regulatory factors, to identify the mechanism of inhibiting muscle atophy after HME treatment. In addition, suppression of phosphorylation of Akt, FoxO3a and MARF-1, transcription factors of degradation proteins were analyzed via western blotting. Results : As a result of MTT, HME there was no show cytotoxicity up to a concentration of 1 mg/ml. The cytoprotective effects on oxidative stressed myoblast and myotube was better in HME extract than those of MR, AC, EU, and BS, respectively. HME treatment in Myotube induced by oxidative stress after H₂O₂ treatment increased Myo D, Myogenine activation, and Akt, FoxO3a phosphorylation and decreased expression of MuRF-1. As the results, HME has synergistic effects on protection against proteolysis of C2C12 myotubes through activation of the Akt signaling pathway under oxidative stress. Conclusions : These results suggest that HME may also be useful as a preventing and treating material for skeletal muscle atrophy caused by age-related diseases.

• Microbiology and Biotechnology Letters
• /
• v.42 no.4
• /
• pp.317-323
• /
• 2014

Violacein has received much attention due to its various important biological activities, including broad-spectrum antibacterial and antifungal activity, anti-malarial, anti-tumoral, anti-oxidant, and anti-diarrheal activities. EP15224 strain isolated from forest soils in Korea was found to be a new species belonged to the genus Massilia based on its 16S ribosomal DNA sequences. The 16S ribosomal DNA of strain EP15224 displayed 97% homology with Massilia sp. BS-1, the nearest violacein-producing bacterium. Strain EP15224 produced bluish-purple pigment well in a synthetic MM2 medium containing glucose, $(NH_4)_2SO_4$, $Na_2HPO_4{\cdot}7H_2O$, $KH_2PO_4$, $MgSO_4{\cdot}7H_2O$, and 1 mM $\small{L}$-tryptophan. The chemical analysis of the pigment by LC/MS/MS showed that it is violacein with molecular weight of 343.34. This is the second report on the production of violacein by a Massilia species. In this study, the optimal culture conditions for violacein production were established under which 280 mg/l crude violacein was produced : glucose 2 g/l, $(NH_4)_2SO_4$ 1 g/l, $Na_2HPO_4{\cdot}7H_2O$ 2 g/l, $KH_2PO_4$ 1 g/l, $MgSO_4{\cdot}7H_2O$ 0.1 g/l, L-tryptophan 0.24 g/l, 25 ml medium in a 250 ml flask, with an inoculumn size of 10% (v/v), 72 h of cultivation with 250 rpm at $25^{\circ}C$.