• Journal of the Korean Ceramic Society
• /
• v.23 no.4
• /
• pp.55-61
• /
• 1986

Phosphosilicate glass(PSG) films have been used as fusable deposited dielectrics in silicon gate MOS integrated circuits. But in this experiment BPSG(borophosphosilicate glass) will be optimized for more efficient utilization of the reactants. The BPSG films were deposited on silicon wafers by the oxidation of the hydrides at 430$^{\circ}$C in conventional atmospheric-pressure chemical-vapor-deposition (CVD) systems. Physical and chemical properties of CVD BPSG films have been characterized both for as-deposited and for fused films The. relationship between deposited BPSG film composition and infra-red absorption solution etch rate and fusion temperature is discussed and examples of BPSG composition that can be fused at 900~95$0^{\circ}C$ and 800~85$0^{\circ}C$ are given. In addition to having lower fusion temperature than PSG films BPSG films have lower as-deposited intrinsic tensile stress and low aqueous chemical etch rate they have been considered for applications where these characteristics are advantageous.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.41 no.1
• /
• pp.15-20
• /
• 2004

The interfacial layer between the oxide film and the metal film according to RTP annealing temperature of metal film has been studied. Two types of oxides, BPSG and PETEOS, were used as a bottom layer under multi-layered metal films. We observed the interface between oxide and metal films using SEM (scanning electron microscopy), TEM (transmission electron microscopy), AES (auger electron spectroscopy). Bonding failure was occurred by interfacial reaction between the BPSG oxide and the multi-layered metal films above $650^{\circ}C$ RTP anneal. The phosphorus accumulation layer was observed at interface between BPSG oxide and metal films by AES and TEM measurements. On the other hand, bonding was always good in the sample using PETEOS oxide as a bottom layer. We have known that adhesion between BPSG and multi-layered metal films was improved when the sample was annealed below $650^{\circ}C$.

• Korean Journal of Materials Research
• /
• v.1 no.3
• /
• pp.132-138
• /
• 1991

A comparision was made on the influence of BPSG flow temperatures on the electrical properties in submicron CMOS DRAMs containing two BPSG layers. Three different combinations of BPSG flow temperature such as $850^{\circ}C/850^{\circ}C,\;850^{\circ}C/900^{\circ}C,\;and\;900^{\circ}C/900^{\circ}C$ were employed and analyzed in terms of threshold, breakdown and isolation voltage along with sheet resistance and contact resistance. In case of $900^{\circ}C/900^{\circ}C$ flow, the threshold voltage of NMOS was decreased rapidly in channel length less than $0.8\mu\textrm{m}$ with no noticeable change in PMOS and a drastic decrease in breakdown voltages of NMOS and PMOS was observed in channel length less than and equal to $0.7\mu\textrm{m}$ and $0.8\mu\textrm{m}$, respectively. Little changes in threshold and breakdown voltages of NMOS and PMOS, however, were shown down to channel length of $0.6\mu\textrm{m}$ in case of $850^{\circ}C/850^{\circ}C$ flow. The isolation voltage was increased with decreasing BPSG flow temperature. A significant increase in the sheet resistance and contact resistance was noticeable with decreasing BPSG flow temperature from $900^{\circ}C$ to $850^{\circ}C$. All these observations were rationalized in terms of dopant diffusion and activation upon BPSG flow temperature. Some suggestions for improving contact resistance were made.

• Journal of the Korean Ceramic Society
• /
• v.26 no.3
• /
• pp.381-389
• /
• 1989

Effects of annealing temperature, time, and atmospehre on the flow characteristics of Atmospheric Pressure Chemical Vapor Deposition-borophosphosilicate glass were investigated. Stable step coverage can be obtained by annealing the BPSG film at 90$0^{\circ}C$ for 30 minutes in N2 atmosphere, but further heat treatment isnot effective. Flow characteristics of the BPSG film was better in steam atmosphere than in N2 atmosphere, and the factors which cause it were analyzed. The concentration of boron in the BPSG film was measured pretty accurately by FTIR spectrum. Boron content in the BPSG film was reduced by annealing treatment. The decrement of boron was greater in steam atmosphere than in the N2 atmosphere. Also it was found from the FTIR spectroscopic analysis that PH3 inhibited the oxidation of B2H6.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.37 no.3
• /
• pp.27-33
• /
• 2000

The selective chemical vapor deposition techniques for Cu metallization were studied. For enhancing the selectivity, furnace annealing and N$_{2}$ plasma were treated on patterned TiN/BPSG prior to the copper deposition. As a result, Cu did not deposited lead to suppressing the nucleation on BPSG singificantly. With the increasement the plasma treatment temperature, copper nucleation on BPSG was suppressed mote effectively, From TOF-SIMS(Time-of-Flight Secondary ion Mass Spectrometry), it is considered that annealing and N$_{2}$ plasma treatment remove hydroxyl(0-H) group so that eliminating the nucleation site for copper precursor enhance the selectivity.

• Journal of the Korean Vacuum Society
• /
• v.4 no.S1
• /
• pp.151-156
• /
• 1995

0.5$\mu$m 이하 급의 device에서 TEOS/O3 BPSG 박막을 층간절연막(Interlayer Dielectric)으로 사용하여, 평탄화를 위해 etchback 공정을 적용할 때 BPSG 박막이 가지는 구조적, 화학적 불안정성으로 인해 B,P 농도의 변화나 crack 발생 현상이 일어날 수 있다. 본 실험에서는 이러한 현상을 억제하기 위해 농도를 달리한 이층막의 증착, PR strip 시에 사용하는 wet chemical의 변경 및 증착후 치밀화(densificaiton)공정추가 등의 방법을 사용하였으며, 이에 따른 박막 특성의 변화를 조사하였다.

• Proceedings of the KIEE Conference
• /
• 1987.07a
• /
• pp.561-564
• /
• 1987

The deposition and reflow properties or BPSG film deposited by APCVD was characterized by variation of each process parameter. As deposition temperature is increased higher, deposition rate is decreased. Maximum deposition rate of BPSG film is obtained in higher 02/Hyride ratio than CVD Oxide or PSG. BPSG film shows stable dielectric properties and we obtained good planarization effect at lower reflow temperature in case of BPSG film than PSG film.

• Proceedings of the IEEK Conference
• /
• 2002.07a
• /
• pp.365-368
• /
• 2002

We investigated the influence of RTP annealing of multi-layered metal films deposited on oxides layer. Two types of oxides, BPSG and P-7205, were used as a bottom layer under multi-layered metal film. The bonding was not good in metal/BPSG/Si samples because adhesion between metal layer and BPSG oxide layer was poor by interfacial reaction during RTP annealing above 650$^{\circ}C$. On the other hand bonding was always good in metal/ P-TEOS /Si samples regardless of annealing temperature. We observed the interface between oxide and metal layers using AES and TEM. The phosphorus and oxygen profile in interface between metal and oxide layers were different in metal/BPSG/Si and metal/P-TEOS/Si samples. We have known that the properties of interface was improved in metal/BPSG/Si samples when the sample was annealed below 650$^{\circ}C$.

• Korean Journal of Materials Research
• /
• v.6 no.12
• /
• pp.1233-1241
• /
• 1996

본 연구에서는 BPSG(borophosphosilicate glass)/SiO2/Si 기판상에 5000$\AA$의 구리박막을 화학증착한 후 Ar 분위기하 250-55$0^{\circ}C$, 5-90초 급속열처리하여 열처리 전후의 결정구조, 면저항, 미세구조의 박막특성 변화를 분석하였다. 후열처리된 구리박막에서는 결정성 및 (111) 배향의개선과 함께 결정립 성장이 확인되었으나, 구리의 표면산화반응과 BPSG 내로의 급속한 확산에 의해 전기적 특성의 개선은 미미하였다. 그리고 열처리 박막내에는 구리 실리사이드상의 형성이 발견되지 않았으며, 25$0^{\circ}C$/90초의 저온 장시간 또는 55$0^{\circ}C$/20초의 고온 단시간 조건에서 전형적으로 나타나는 Cu2O 상이 시편의 전기비저항 증가와 표면열화에 직접적으로 영향을 미쳤다. 또한, 이들 결과로부터 급속열처리법에 의한 Cu/BPSG 열처리의 공정범위를 규명할 수 있었다.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2010.05a
• /
• pp.533-534
• /
• 2010