Flow Characteristics of the BPSG Film

BPSG막의 Flow 특성

  • Published : 1989.03.01

Abstract

Effects of annealing temperature, time, and atmospehre on the flow characteristics of Atmospheric Pressure Chemical Vapor Deposition-borophosphosilicate glass were investigated. Stable step coverage can be obtained by annealing the BPSG film at 90$0^{\circ}C$ for 30 minutes in N2 atmosphere, but further heat treatment isnot effective. Flow characteristics of the BPSG film was better in steam atmosphere than in N2 atmosphere, and the factors which cause it were analyzed. The concentration of boron in the BPSG film was measured pretty accurately by FTIR spectrum. Boron content in the BPSG film was reduced by annealing treatment. The decrement of boron was greater in steam atmosphere than in the N2 atmosphere. Also it was found from the FTIR spectroscopic analysis that PH3 inhibited the oxidation of B2H6.

Keywords

References

  1. Semiconductor International v.8 no.7 Deposited Dielectrics for VLSI W.Kern(et al.)
  2. J.Vac. Sci. Technol. v.B1 no.1 The Step Coverage of Undoped and Phosphorus-doped SiO₂ Glass Films R.M.Levin(et al.)
  3. J.Electrochem.Soc. v.121 no.1 A Scanning Electron Microscope Investigation of Glass Flow in MOS Intergrated Circuit Fabrication W.E.Armstrong(et al.)
  4. J.Electrochem.Soc. v.128 no.2 Planarization of Phosphorus-doped Siliecon Dioxide A.C.Adsams(et al.)
  5. RCA Review v.37 CVD Glass Films for Passivation of Silicon Devices ; Preparation, Composition and Stress Properties W.Kern(et al.)
  6. Jpn.J.Appl.Phys. v.23 no.7 Reflow of PSG Layers by Halgen Lamp Short Duration Heattng Technique T.Hara(et al.)
  7. J.Electrochem.Soc. v.132 no.1 Deposition and Reflow of Phosphosilicate Glass R.A.Bowling(et al.)
  8. J.Eletrochem.Soc. v.133 no.7 Reflow Mechanisms of Contact Vias in VLSI Processing R.A.Levi(et al.)
  9. Encyclopdia of Materials Science and Engineering v.3 M.B.Bever(et al.)