• Journal of IKEEE
• /
• v.15 no.1
• /
• pp.57-63
• /
• 2011

This paper presents a tunable band pass filter (BPF) for multi bio-signal detection. The bandwidth can be controlled by the bias current of transconductance (gm), while conventional BPF exploited switchable capacitor array for band selection. With this design technique, the die area of proposed BPF reduced to at least one tenth the area of conventional design. The simulation results show the high cut-off frequency tuning range of from 100Hz to 1Khz. The circuit was implemented with a 0.18um CMOS standard technology. Total current consumption is 1uA at the supply voltage of 1V with sub-threshold design technique.

• Proceedings of the IEEK Conference
• /
• 2005.11a
• /
• pp.163-166
• /
• 2005

Multilayer LTCC technology enables RF modules to be reduced dramatically by taking advantage of the three dimension flexibility. Compared to a conventional two dimensional PCB, LTCC allows higher density, reduced size, and lower cost. In this research, BPF based on LTCC for 900MHz ZigBee application was implemented which can replace SAW filter with using the material of the Dupont9599's dielectric constant 7.8. And distributed baud pass filter for 900MHz ZigBee system applications is presented. Using resonator stripline and capacitance, 2nd order band pass filter was designed. Adjusting resonator's length and capacitance is easy to tune at accurate center frequency by shifting band because ZigBee system is using narrow bandwidth, $902MHz^{\sim}928MHz$. Also resonator has no limitation in space, so reducing size is possibile. Designed filter had I.L. 2.8dB at 915MHz and attenuation at 815MHz, 1015MHz was 16dB, 15dB, respectively. Therefore, the sharpe cut-off and good insertion loss for ZigBee system application.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.6
• /
• pp.282-289
• /
• 2014

In this paper, the UWB (Ultra Wide Band) band-pass filter (BPF) with compact-size using impedance mismatching in transmission line and SIR (Stepped Impedance Resonator) instead of open stubs is presented. The proposed BPF have 103 % of bandwidth and 11.2 GHz of center frequency, respectively. In additional, the operation frequencies of the suggested BPF are 4.8 GHz to 16 GHz. In this structure, the length of the transmission line is reduced to half compared with the original one by impedance mismatching technique with low frequency band (sub harmonics) and harmonic components. Also, the open stub can be used for SIR due to reduced size. Experimental results show that the insertion and return losses are 0.35 dB and 15.1 dB, respectively and the filter size is $8.92{\times}10.6mm^2$. The proposed BPF is in good agreement.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.5A
• /
• pp.494-499
• /
• 2008

In this study, a Software Defined Radio(SDR) technology-based digital filtering technique applicable to a multiple channel processing system such as a wireless mobile communication system using Code Division Multiple Access(CDMA) technology is proposed. The technique includes a micro-processor to redesign Finite Impulse Response(FIR) filter coefficients according to specific system information and to download the filter coefficients to one digital Band Pass Filter(BPF) to reconfigure another system. The feasibility of the algorithm is verified by implementing a multiple channel signal generator that is reconfigurable to other system profiles, including those for a CDMA system and a WCDMA system on identical hardware platform.

• 한국정보통신설비학회:학술대회논문집
• /
• 2003.08a
• /
• pp.3-6
• /
• 2003

Effect to altered geometry of a suggested defected ground structure(DGS) unit cell was investigated . And equivalent circuit model was extracted from the DGS unit cell A microstrip band Pass filter with DGS has been designed in this Paper. The BPF with DGS was fabricated and obtained experimental results with network analyzer HP8510C. Experimental results show the center frequency of 2.45GHz, the insertion loss of 0.85dB, and the 3-dB bandwidth of 470MHz (19.5%). The center frequency of BPF is 2.4GHz which is available for wireless LAN.

• International Journal of Control, Automation, and Systems
• /
• v.4 no.5
• /
• pp.592-600
• /
• 2006

The pattern recognition of the complicated grasping operation based on electroencephalography (simply named as EEG) is very helpful on realtime control of the robotic hand. In the paper, a new spectral feature analysis method based on Band Pass Filter (simply named as BPF) and Power Spectral Analysis (simply named as PSA) is presented for discriminating the complicated grasping operations. By analyzing the spectral features of grasping operations with the use of the two-channel EEG measurement system and the pattern recognition of the BP neural network, the degree of recognition by the traditional spectral feature method based on FFT and the new spectral features method based on BPF and PSA could be compared. The results show that the proposed method provides highly improved performance than the traditional one because the new method has two obvious advantages such as high recognition capability and the fast learning speed.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.12 no.5
• /
• pp.815-820
• /
• 2008

Recently the frequency assignment and the technical specifications of UWB systems for communications are completed. Therefore many UWB systems have been developed. In our country $3.1{\sim}4.8GHz$ and $7.2{\sim}10.2GHz$ are assigned for UWB systems for communications. When we consider RF technologies and the easy implementation of UWB systems, UWB systems used in the low band are more developed than high band systems. In this paper we design and implement a BPF for low band UWB systems by means of considering the easy implementation of UWB systems. The designed and implemented BPFs are low band filter and low band channel filters. The measured results of the low band filter show that the filter has 21.85dB and 17.91dB attenuation at 3.1GHz and 4.8GHz, 1.53GHz of -10dB bandwidth and 2dB of insertion loss. Low band can be divided into 3 channels with 500MHz of the channel bandwidth. The channel filter for channel number 1 has the characteristics of 24.85dB attenuation at 3.1GHz, 0.61GHz of -10dB bandwidth and 1.87dB of insertion loss. The filter for channel 3 in low band has 19.2dB of attenuation at 4.8GHz, 0.49GHz of -10dB bandwidth and 2.49dB of insertion loss.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.12 no.3
• /
• pp.427-432
• /
• 2017

This study describes the design and implementation of SHF band Downconverter Digital Satellite Communication. The SHF band Downconverter unit consists of PLDRO and Frequency converter. In Frequency converter, microstrip BPF and LPF designed through the pre EM simulation are implemented to minimize the unwanted spurious in Frequency converter. Through the pre-simulation analysis of space environment, the possibility of and minimized about the malfunction of equipment and we designed a reliable SHF band Downconverter through simulation for a TID according to the vibration generated during the launch and space radiation environment, and compared pre-simulation of main performance results to test results about main performances of SHF band Downconverter after production.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.12 no.2
• /
• pp.261-266
• /
• 2017

This study describes the design and implementation of SHF band Upconverter Digital Satellite Communication. The SHF band Upconverter unit consists of PLDROand frequency converter. In frequency converter, microstripBPF and LPF designed through the pre EMsimulation are implemented to minimize the unwanted spurious in frequency converter. Through the pre-simulation analysis ofspace environment, the possibility of and minimized about the malfunction of equipment and we designed a reliable SHF band Upconverter through simulation for a TID according to the vibration generated during the launch and space radiation environment, and compared pre-simulation of main performance results to test results about main performances of SHF band Upconverter after production.

• KIEE International Transactions on Electrophysics and Applications
• /
• v.4C no.4
• /
• pp.165-169
• /
• 2004

This paper reports a miniaturized conductor-backed CPW (CBCPW) bandpass filter based on a thin film polyimide layer coated on CMOS-grade silicon. With a 20 ${\mu}{\textrm}{m}$-thick polyimide interface layer and back metallization on the CMOS-grade silicon, the interaction of electromagnetic fields with the lossy silicon substrate has been isolated, and as a result a low-loss and low-dispersive CBCPW line has been obtained. Measured attenuation constant at 20 GHz is below 1.2 ㏈/cm, which is compatible with the CPW on GaAs. In addition, by using the proposed CBCPW geometry, miniaturized BPF for Ku band application is designed and its measured frequency response shows excellent agreement with the predicted value with validating the performances of the proposed CBCPW geometry for RFIC interconnects and filter applications.