• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.22 no.9
• /
• pp.897-903
• /
• 2011

This paper presents a highly linear power amplifier MMIC, having an output power level of about 1 watt, based on InGaP/GaAs hetero-junction bipolar transistor(HBT) technology for the 900 MHz band. The active bias circuit is applied to minimize the effect of temperature variation. Ballast resistors are optimized to prevent a current collapse and a thermal runaway. The fabricated power amplifier exhibited a gain of 17.6 dB, an output P1dB of 30 dBm, and a PAE of 44.9 % at an output P1dB from the one-tone excitation. It also showed a very high OIP3 of 47.3 dBm at an average output power of 20 dBm from the two-tone excitation.

• Journal of IKEEE
• /
• v.7 no.1 s.12
• /
• pp.88-96
• /
• 2003

In this paper, We designed and implemented a linear high-power amplifier which can be used for the commercial service in band of $1.9GHz(1.93{\sim}1.99GHz)$ at U.S.A. The output power of the implemented linear high power amplifier is 25W. In order to satisfy IMD characters decided by FCC, the Feedforward linearization techniques has been used. The used feedforward method has improved the IMD characteristics from 10.51dBc to 19.01dBc in each power level from 1W(30dBm) to 25W(44dBm). The IMD level of the final output shows from minimum 64.84dBc to maximum 68.17dBc. Because this good characteristics of IMD, the LPA is expected to use as a commercial product of PCS base station.

• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2000.11a
• /
• pp.175-178
• /
• 2000

본 연구에서는 CDMA단말기용 Receiver MMIC를 설계하였다. 전체회로는 저잡음 증폭기, 하향 주파수 혼합기 그리고 중간주파수 증폭기로 구성된다. 또한 문턱전압과 전원전압의 변화에 대해 회로의 안정성을 높이는 바이어스 보상회로를 추가하였다. 설계시 높은 선형성과 저잡음 특성을 가지도록 토폴리기를 구성하였고 설계 결과 전체 이득은 28.5dB, 저잡음 증폭기의 입력IP3는 8dBm, 하향주파수 혼합기의 입력 IP3는 0dBm이며 전체회로의 소모전류는 22.1mA이다. 레이아웃된 전체회로의 크기는 1.4$\times$1.4 [$\textrm{mm}^2$] 이다.

• Journal of Periodontal and Implant Science
• /
• v.44 no.4
• /
• pp.194-200
• /
• 2014

Purpose: The purpose of this study was to assess and compare the clinical and radiographic outcomes of guided tissue regeneration therapy for human periodontal intrabony defects using two different collagen membranes: a porous nonchemical cross-linking collagen membrane (NC) and a bilayer collagen membrane (BC). Methods: Thirty subjects were randomly assigned and divided into the following 3 groups: a test group (NC+BM), in which a NC was used with xenograft bone mineral (BM), a positive control group (BC+BM), in which a BC was used with xenograft BM, and a negative control group (BM), in which only xenograft BM was used. The following clinical measurements were taken at baseline and 3 months after surgery: plaque index, gingival index, probing pocket depth, gingival recession, and clinical attachment level. Radiographic analysis was performed at baseline, 1 week and 3 months after surgery. Results: Membrane exposure was not observed in any cases. Significant probing depth reduction, attachment-level gain and bone fill were observed for both test and control groups compared to baseline at 3 months after surgery (P<0.05). However, there were no statistically significant differences in clinical improvement and radiographic bone fill between treatment protocols (P>0.05). Conclusions: Within the limitations of this study, the results suggest that both NC and BC were comparable in terms of clinical and radiographic outcomes for the treatment of periodontal intrabony defects in human subjects.

• Food Science of Animal Resources
• /
• v.34 no.2
• /
• pp.252-256
• /
• 2014

The objective of this study was to investigate the effect of dietary supplementation of blood meal as a source of L-histidine, and the addition of magnesium (Mg) as a catalyst of carnosine synthetase for the carnosine and anserine concentrations of pig muscles (longissimus dorsi, LD and vastus intermedius, VI). A total of twenty-four pigs with an average body weight of $60.2{\pm}4.2$ kg were randomly allotted to one of three dietary treatments (eight replicates), during 56 d of the feeding trial. Dietary treatments included: (1) Basal: basal diet; (2) BM: 95% basal diet + 5% blood meal; and (3) BM+Mg: 94.8% basal diet + 5% blood meal + 0.2% MgO (60% Mg). Results indicated that drip loss in the LD was less (p<0.05) for meat with BM+Mg treatment than that with Basal treatment, but the values for BM treatment did not differ from those of the other two treatment groups. The concentrations of carnosine in the LD were increased by 10.0% in both BM and BM+Mg treatment groups over the Basal treatment group (significance not verified). The concentrations of carnosine and anserine in the VI were not affected by the dietary treatments. Inclusion of additional Mg in diets had no effect on carnosine and anserine concentrations in the LD and VI. In conclusion, dietary supplementation of blood meal could be a potential method of fortifying the pork with carnosine. Inclusion of additional Mg in the diets containing blood meal had no benefit on carnosine and anserine depositions in pig muscles.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.20 no.2
• /
• pp.107-114
• /
• 2010

For stable germline transformation, the promoter of Bombyx mori cytoplasmic actin gene (BmA3) has been used for ubiquitous expression of transgenes. So far, no strong promoter is available for ubiquitous expression in B. mori, excluding BmA3 promoter. To identify more powerful promoter than previously reported BmA3 promoter, we isolated 9 clones that show stronger signal compared to BmA3 by a dot blot hybridization. Among these 9 clones, we focused on one clone which has high amino acid homology (85%) with hypothetical protein 32 gene of Lonomia obliqua. This clone, named bHp32 (B. mori hypothetical protein 32) was ubiquitously expressed in all tissues and developmental stage of fifth instar B. mori larvae. As result of promoter assay using dual luciferase assay system, we found the highest transcription activity region (-1,200/+220) in the 5'-flanking region of bHp32 gene, which has 42-fold more intensive promoter activity than BmA3 promoter. Moreover, the bHp32 promoter was normally regulated in Bm5, Sf9, and S2 cells. Therefore, we suggest that bHp32 promoter may be used more powerful and effectively for transgene expression in various insects containing B. mori as a universal promoter.

• Tissue Engineering and Regenerative Medicine
• /
• v.15 no.6
• /
• pp.771-779
• /
• 2018

BACKGROUND: Mesenchymal stromal cells (MSCs) are multipotent stem cells that can differentiate into several cell types. In addition, many studies have shown that MSCs modulate the immune response. However, little information is currently available regarding the maintenance of immunomodulatory characteristics of MSCs through passages. Therefore, we investigated and compared cytokine and gene expression levels from adipose (AD) and bone marrow (BM)-derived MSCs relevant to immune modulation from early to late passages. METHODS: MSC immunophenotype, growth characteristics, cytokine expressions, and gene expressions were analyzed. RESULTS: AD-MSCs and BM-MSCs had similar cell morphologies and surface marker expressions from passage 4 to passage 10. Cytokines secreted by AD-MSCs and BM-MSCs were similar from early to late passages. AD-MSCs and BM-MSCs showed similar immunomodulatory properties in terms of cytokine secretion levels. However, the gene expressions of tumor necrosis factor-stimulated gene (TSG)-6 and human leukocyte antigen (HLA)-G were decreased and gene expressions of galectin-1 and -3 were increased in both AD- and BM-MSCs with repeated passages. CONCLUSION: Our study showed that the immunophenotype and expression of immunomodulation-related cytokines of AD-MSCs and BM-MSCs immunomodulation through the passages were not significantly different, even though the gene expressions of both MSCs were different.

• Proceedings of the Korea Institute of Applied Superconductivity and Cryogenics Conference
• /
• 2002.02a
• /
• pp.358-361
• /
• 2002

The millirneterwave high-T$_{c}$ superconducting(HTS) down-converter sub-system with the HTS/III-V integrated mixer as the central device is demonstrated first. The constituent components of HTS down-converter sub-system such as a single balanced type integrated mixer with rat-race coupler, a cavity type bandpass filter (26 GHz), and a HTS planar lowpass filter(1 GHz), semiconductor LNA and IF-power amplifier, a driving electronic module for A/D converter, and a Stirling type mini-cooler module were combined into an International stand- and rack of 19-inch. From the RF(-61 dBm, 26.5GHz)and LO signal(-1 dBm, 25.6 GHz), IF signal(0dBm, 0.9 GHz) agreed with simulated results is obtained.d.

• Journal of Sericultural and Entomological Science
• /
• v.40 no.1
• /
• pp.60-62
• /
• 1998

To understand expression of some early and late genes of Bombyx mori nuclear polyhedrosis virus (BmNPV) in the B. mori-derived BmN cell line, the transcripts were analyzed by polymerase chain reaction with synthetic primers. After infection, the transcript of early genes, which include p35, IE1 and helicase p143, was immediately detected in the infected cells. In addition, the transcript of late genes, which include p10 and polyhedrin, was also detected in just-infected cells. In conclusion, our results revealed that transcripts of early and late genes of BmNPV are immediately expressed from the cells after infection.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.28 no.2
• /
• pp.216-227
• /
• 1992

The corrosion rate, behavior of corrosion fatigue and characteristic of cathodic protection for SB41 were investigated by corrosion and corrosion control tests in seawater at laboratory and coast. The main result obtained are as the following; 1) The corrosion rate of base metal (BM) is about 28-37 mg/dm super(2) day in seawater of coast. 2) The correlation between the stress intensity factor range $\Delta$K and crack propagation rate da/dN for weldment follows paris' rule in seawater : da/dN=C($\Delta$K) super(m) where m is the slope of the correlation, and is 2.02 for BM and 1.75 for heat affected zone (HAZ) respectively. 3) The corrosion sensitivity of HAZ is more sensitive than that of BM under the low region of $\Delta$K. 4) With increase of bared surace area of cathode, cathodic protection potential is increased sharply.