• 토지주택연구
• /
• 제13권3호
• /
• pp.115-123
• /
• 2022

최근 국내에서도 토목분야에 BIM을 활용하는 범위나 빈도가 점점 증가하고 있다. 하지만 전면설계로써 BIM을 적용하는 것이 아닌 2D 설계 이후 BIM 모델링을 수행하는 전환설계로써 BIM을 활용하고 있다. 본래 목적에 맞게 BIM을 활용하기 위해서는 전면설계로써 BIM을 활용해야 하지만, 갑작스러운 변화는 오히려 시장의 혼란과 BIM에 대한 거부감을 높일 수 있기때문에 전환설계로써 BIM 활용을 통해 단계적 BIM 정착을 진행하고 있다. 하지만, 현재 기본 설계단계에서 수행하고 있는 전환설계 방법은 낮은 업무 효율성으로 인해 실제 업무 적용에 많은 어려움이 따르고 있다. 따라서 본 연구에서는 현재 전환설계로써 BIM을 활용하는 기존의 프로세스를 분석하고 기존 프로세스에서 문제점을 보완할 수 있는 기본설계단계에서의 BIM 적용 프로세스를 제안하고자 한다.

• 한국재난정보학회 논문집
• /
• 제18권4호
• /
• pp.891-898
• /
• 2022

연구목적: 건설산업의 전 분야 및 전 단계에 대한 BIM 도입 의무화가 머지않아 시행될 만큼 BIM 업무의 실질적인 생산성 향상을 위한 기술 확보 방안이 필요하기 때문에 연구에서는 엔지니어가 BIM기반 설계 과정에서 건설기준을 검증할 수 있도록 BIM 모델링 절차별로 제작되는 주요 객체에 대해 자동으로 관련 건설기준을 검증할 수 있는 방안을 제시하였다. 연구방법: BIM기반 도로 설계 업무를 대상으로 모델링 업무 절차를 정의하고, 각 단계에서 도출되는 BIM 모델별로 관련 설계기준을 데이터베이스로 구축하는 방안을 마련하였다. 그리고 BIM기반 설계기준 검토 자동화 시스템 개발을 위한 프로세스도 제시하였다. 연구결과: Civil3D 및 Dynamo를 활용하여 BIM기반 설계기준 검토 자동화 모듈을 개발하고, 시범적용을 통해 설계과정에서 제작되는 BIM 객체의 건설설계기준 충족여부를 자동으로 신속하게 제공할 수 있음을 확인하였다. 결론: BIM기반 설계기준 검토 자동화 기술은 BIM 모델 제작 업무의 생산성 향상과 BIM 모델의 품질확보가 가능하다.

• 한국BIM학회 논문집
• /
• 제12권4호
• /
• pp.41-51
• /
• 2022

BIM was introduced under the leadership of public institutions, and projects such as road, railway, and site creation, including BIM tasks, are currently being ordered. In addition, as the Ministry of Land, Infrastructure and Transport(MOLIT) is pushing for the full design of BIM, public institutions under its jurisdiction are also pushing for the full design of BIM. Full design of BIM means that all designs are done with BIM. Public institutions' BIM guidelines only require BIM deliverables, and there is a limited direction for the BIM design process to respond to traditional design approaches. Therefore, it is necessary to develop a BIM-based design process corresponding to the full design of BIM.

• 한국BIM학회 논문집
• /
• 제11권3호
• /
• pp.1-11
• /
• 2021

BIM is one of the means of reducing the economic loss caused by design errors. These features of BIM have led to increased use of BIM. With the increasing use of BIM, several studies have been conducted to analyze the performance of BIM. As the importance of BIM staff is emphasized in the performance analysis of BIM, the human resource allocation of BIM staff can become an important research issue. However, there are few studies to measure the workforce effectiveness of BIM staff. Ham et al (2020) measured BIM workforce efficiency using FCFS queue model rules. Since design errors can have different effects on the project depending on the type, there are design errors that must be dealt with first. Therefore, in this study, a priority queue was used to solve design errors with high priority first. The performance of BIM-based design verification was analyzed by quantitatively analyzing the performance of BIM staff when the priority rule was applied to the design error processing sequence.

• 한국BIM학회 논문집
• /
• 제3권1호
• /
• pp.1-10
• /
• 2013

BIM(Building Information Modeling) ordering manuals and guidelines are diffused with the recent BIM activation. However, it is causing drawbacks such as an increase of work at each design stage and a decline of BIM application level that the standard of making up and managing BIM is vague and it includes comprehensive meaning. Therefore, this study aims to secure BIM work standard by establishing BIM making-out standard based on LOD(Level of Detail) classification considering domestic design process. It compared each definition of LOD by analyzing domestic and foreign BIM guideline examples, and figured out insufficiency of existing domestic and foreign design process and BIM guidelines. Moreover, it drew architects' work articles for promoting the progression of the efficient design process, and analyzed BIM requirements on design process, dividing BIM application scale by field. Through this analyzing process, it finally established BIM making-out standard classified by design process. The effects of establishing BIM making-out standard would include improving a division of labor and cooperation environment by creating integrated BIM model on design stages, advancing work efficiency by preventing a repetition and an increase of work, and upgrading project completeness and design quality. Besides, it can secure BIM work standard by clarifying responsibility for working steps. BIM making-out standard established by this study will contribute to developing the future BIM work standard document and BIM guideline as a data base.

• 한국BIM학회 논문집
• /
• 제6권2호
• /
• pp.47-57
• /
• 2016

Recently, the introduction and spread of BIM technology has been actively promoted at the domestic level and abroad. However, the BIM adoption and diffusion rate in the whole construction industry has been slower than expected, this is because they applied to construction projects in a way that does not meet the basic objective of BIM adoption. The objective of this paper is to derive a BIM adoption strategy that can provide benefits and efficiency from the design phase, by analyzing issues related to design errors identified in two real world projects based on the 2D to BIM conversion process. Types of issues, type distribution, and degree of BIM contribution to find issues were analyzed in a quantitative way, and then a BIM adoption strategy was derived. As a result, this paper identified that there obviously exists a limit in the 2D to BIM conversion process by repeating the problems that occur in the traditional 2D design process. Therefore, the authors of this paper insist that the design firms should adopt BIM-based design processes, fully, to get financial benefits as well as to improve the design quality.

• 한국건축시공학회지
• /
• 제10권3호
• /
• pp.145-153
• /
• 2010

BIM은 최근 공공 및 민간 발주자에 의해 활용이 점차 확대 시행 되고 있으며, 설계사무실에서도 BIM을 도입하고자 하고 있다. 이런 흐름에 발맞추어 학부교육에서 BIM의 교육이 필요함을 인지하고, 현재 진행되고 있는 국내 BIM 교육의 현황을 파악하여 학부교육에서 이루어질 수 있는 설계교육 프로세스의 개선을 도출하고자 하였다. 기존에 건축공학 교육과정에 BIM을 활용하여 구조, 시공, 설비의 각 요소의 핵심이 반영된 종합적인 설계가 가능하게 하고자 한다. 3D 중심의 설계를 통하여 구조설계교육을 강화하고 BIM 도구를 활용하여 공정 및 적산을 연계한 시공 CM교육을 강화하고 친환경 사전분석을 통해 친환경설계 교육을 이루도록 설계교육 프로세스를 개선하고자 한다.

• 한국BIM학회 논문집
• /
• 제9권4호
• /
• pp.21-30
• /
• 2019

Many studies on BIM-based design, construction and operation have already been conducted on roads, railways, etc., but BIM research in the ports and harbors is still lacking. This research develops BIM Library and Technical contents focused on practical usability of ports and harbors infrastructure. We have developed technical content by applying various User Interfaces and workflows, considering the characteristics of ports and harbors design. In order to examine the practical utility of the developed library and contents, we tried modeling the breakwater using these. As a result, we confirmed that collaboration of BIM library and technical contents could significantly improve the productivity of BIM design by increasing library usage and automating repetitive tasks.

• 한국디지털건축인테리어학회논문집
• /
• 제11권4호
• /
• pp.29-38
• /
• 2011

In this study, neighborhood facility and office building to target two cases were performed BIM process. In the initial design phase of the planning process was conducted for the BIM process modeling, BIM in the design stage while performing the required range and level of the process were studied. Accordingly, from architectural firms to leverage BIM process, the proposed methods, efficient use of the modeling process proposed. Quality management information and input for the modeling and design process should be determined from the initial design and construction, including, for each field should be considered BIM, which require an appropriate range of information, according to these requirements, BIM creation and expansion of the level of information should be clearly defined. Perform the procedure for BIM in the process of communicating with stakeholders is critical. In addition, the input data and output data needed to perform management and to perform at the level obtained BIM design process and the model should be clear.

• 한국BIM학회 논문집
• /
• 제5권1호
• /
• pp.25-34
• /
• 2015

In the initial step of BIM based architectural design process, workloads are increased and the decision making process becomes more complex than those of the conventional design process. Technologies regarding distribution, exchange, classification, verification of BIM data are fundamental elements of construct environment for information sharing based on BIM. Interoperability of BIM model data is another issue to integrate BIM model. To improve interoperability in BIM-based collaboration, a model for utilizing formal&unformal design informations is suggested. Futhermore, Prototyping the model and practical test is conducted for advancement of data exchange making design data richen.