• Journal of the Korean Society of Clothing and Textiles
• /
• v.2 no.1
• /
• pp.157-166
• /
• 1978

The purpose of this study was; (1) to examine ready-to-wear dresses to find the characteristics of labels and construction which existed at three different price levels and (2) to make the gathered information available to consumers, designers, manufacturers and the people who are concerned with ready-to-wear garments. A check sheet was made listing a wide variety of features which could cause garments to be different. For the statistical analysis. 87 dresses were used out of 116 dresses examined. Observation was made at the stores in Myung Dong, Suh-Dae Moon and No Ryang Jin in Seoul from February 16, 1978 to March 3, 1978. The findings are; 1. The average prices of high, medium and low priced levels were ${\\}54,728$, ${\\}41,448$ and ${\\}7,225$. The average price discrepancy between high and medium priced levels was ${\\}13,000$ and ${\\}34,194$ between medium and low priced levels. 2. Most of the dresses examined had labels in all three priced levels. The most informative labels were found on medium priced dresses and then high. The low priced dresses had no information which would be of help to the consumer in regard to care, size and Jiber content. 3. Most of the dresses examined were cut on lengthwise grain. The stitching of medium and high priced levels were satisfactory. The chief way of fastening threads at the end of stitching was by backtracking. $28\%$ of the low priced levels was found unappropriate in stitching number because it was too large to the fabric. Many dresses in low priced levels were not pressed well. The average hem width of low priced dresses were less than 3cm, the high 3-4cm and the medium 4-5cm. Hemming was done mostly by hand in high and medium and by machine in low priced dresses. The medium priced dresses used more linings than low and high priced dresses.

• Tunnel and Underground Space
• /
• v.14 no.5
• /
• pp.363-372
• /
• 2004

Double torsion (DT) tests were carried out to investigate the influence of the geometry of guide groove on stress corrosion index of Kumamoto andesite. The fracture toughness was measured in the constant displacement rate, which was set to 2.07 MN/m$^{3}$2/ in average regardless of crack velocity. Stress corrosion indices, n were evaluated using specimens with rectangular, circular and triangular grooves and were 37, 36 and 38 in average, respectively. The n values were constant regardless of the groove geometry, however the DT specimen with triangular groove geometry showed the largest standard deviation in the relationship between crack velocity and stress intensity factor. The DT test was found to be effective in using a rectangular-grooved specimen and the width of the groove must be greater than the average grain size of minerals.

• The Journal of the Korean dental association
• /
• v.44 no.2 s.441
• /
• pp.115-122
• /
• 2006

Objective : The purpose of this study was to evaluate the dimensional errors between real tooth, 3D CT image and CARP model. Materials and Methods : Two maxilla and two mandible block bones with intact teeth were taken from two cadavers. Computed tomography was taken either in dry state and in wet state. After then, all teeth were extracted and the dimensions of the real teeth were measured using a digital caliper at mesio-distal and bucco-lingual width both in crown and cervical portion. 3D CT image was generated using the V-works $4.0^{TM}$ (Cybemed Inc., Seoul, Korea) software. Twelve teeth were randomly selected for CARP model fabrication. All the measurements of 3D Ct images and CARP models were made in the same manner of the real tooth group. Dimensional errors between real tooth, 3D CT image model and CARP model was calculated. Results : 1) Average of absolute error was 0.199 mm between real teeth and 3D CT image model, 0.169 mm between 3D CT image model and CARP model and 0.291 mm between real teeth and CARP model, respectively. 2) Average size of 3D CT image was smaller than real teeth by 0.149 mm and that of CARP model was smalier than 3D CT image model by 0.067mm. Conclusion : Within the scope of this study, CARP model with the 0.291 mm average of absolute eror can aid to enhance the success rate cf autogenous tooth transplantation due to the increased accuracy of recipient bone and donor tooth.

• Journal of the Korean Society of Costume
• /
• v.62 no.8
• /
• pp.81-99
• /
• 2012

This study aims to find out the trouser types of the ancient tribes after analyzing various types of trousers discovered on the reliefs of the Achaemenian period of Persia. Then use the results of the analysis as basic data for a study on the Korean trousers type during the ancient times. For this, a theoretical background on the ancient tribes is developed by referring to the literature documents of literature, and European archeologists' papers and photo data are collected and analyzed as well. In addition to the above data, the data, which have been collected by researchers through a field study are comparatively analyzed. In terms of width, the trousers of the ancient tribes have been divided into three types: narrow, average and wide. Each type has diverse forms. The trouser types varied depending on the tribes, the regions and the manufacturing dates of the reliefs. The narrow type was popular among Median, Scythian and Kappadokian, while the average type was frequently worn by Bactrian and Sogdian who lived in the highlands in the northeastern part of Iran. Lastly, the wide type was mostly found in the southeast of Iran(Arachosia, Aria and Drangiana). The fact that trousers were discovered together with boots has been useful in guessing the lifestyle of ancient tribes. Also, even within the same tribe, the form of the trousers and how they were worn changed depending on the time period.

• Journal of Korean Society of Forest Science
• /
• v.96 no.6
• /
• pp.611-619
• /
• 2007

This study was carried out to analyze the landslide characteristics and forest environment factors on the landslide area of 7 national parks in korea. The results obtained from this study were summarized as follows; The total number of landslide occurrence was 44 areas. The average length of the landslides scar was 152 m, average width was 17 m. And the average area was $2,818m^2$. The factors influencing landslides were highly occurred in Metamorphic rock, mixed forest type. And also, $30{\sim}35^{\circ}$ in slope gradient, NE in slope aspect, slope higher than 1,000 m, concave (凹) type in vertical and cross slope, 0 ordered stream. The main factors affecting landslide area in stepwise regression analysis were sheet type in landslided shape, NE in slope aspect, 2 ordered stream, SE in slope aspect, slope gradient and complex slope in cross slope type in order of regression coefficient.

• Archives of Plastic Surgery
• /
• v.39 no.3
• /
• pp.190-197
• /
• 2012

Background : This article presents long-term outcomes after correcting secondary bilateral cleft lip nasal deformities using a refined reverse-U incision and V-Y plasty or in combination with a composite graft in order to elongate the short columella. Methods : A total of forty-six patients underwent surgery between September 1996 and December 2008. The age of the patients ranged from 3 to 19 years of age. A bilateral reverse-U incision and V-Y plasty were used in 24 patients. A composite graft from the helical root was combined with a bilateral reverse-U incision in the 22 patients who possessed a severely shortened columella. The follow-up period ranged between 2 and 10 years. Results : A total of 32 patients out of 46 were evaluated postoperatively. The average columella length was significantly improved from an average of 3.7 mm preoperatively to 8.5 mm postoperatively. The average ratio of the columella height to the alar base width was 0.18 preoperatively and 0.29 postoperatively. The postoperative basal and lateral views revealed a better shape of the nostrils and columella. The elongated columella, combined with a composite graft, presented good maintenance of the corrected position with no growth disturbance. A composite graft showed color mismatching in several patients. Twenty-six patients demonstrated no alar-columella web deformity and satisfactory symmetry of the nostrils. Four patients experienced a drooping and overhanging of the corrected alar-columella web. Conclusions : A bilateral reverse-U incision with V-Y plasty or in combination with a composite graft was effective in correcting secondary bilateral cleft lip nasal deformity.

• Proceedings of the KIEE Conference
• /
• 2006.07c
• /
• pp.1550-1551
• /
• 2006

An L-band linear accelerator system for e-beam sterilization is under design for bio-technology application. The klystron-modulator system as RF microwave source has an important role as major components to offer the system reliability for long time steady state operation. A PFN line type pulse generator with a peak power of 71.5-MW, $7{\mu}s$, 285 pps is required to drive a high-power klystron. The high power pulse transformer has a function of transferring pulse energy from a pulsed power source to a high power load. The pulse transformer producing a pulse with a peak voltage of 275 kV is required to produce 30-MW peak and 60 kW average RF output power at the frequency of 1.3-GHz. We have designed the high power pulse transformer with 1:13 step-up ratio. The peak and average power capability is 71.5-MW (275 kV, 260 A at load side with $7{\mu}s$ pulse width) and 130 kW, respectively. In this paper, we present a system overview and initial design results of the high power pulse transformer.

• Korean Journal of Environmental Agriculture
• /
• v.23 no.4
• /
• pp.228-233
• /
• 2004

Nitrate removal was examined from May to October 2003 of a surface flow treatment wetland cell, which was a part of a treatment wetland system composed of four wetland cells and a distribution pond The system was established on rice paddy near the Kohung Estuarine Lake located in the southern part of the Korean Peninsula. Effluent from a secondary-level night soil treatment plant was funneled into the system. The investigated cell, 87 m in length and 14 m in width, was created in April 2003. An open water was designed at its center, which was equivalent to 10 percent of its total area. Cattails (Typha angustifolia) were transplanted from natural wetlands into the cell and their stems were cut at about 40cm height from their bottom ends. Average $25.0\;m^3/day$ of effluent from the treatment plant was funneled into the cell by gravity flow and average $24.1\;m^3/day$ of its treated effluent was discharged into the Sinyang Stream flowing into the lake. Its water depth was maintained about 0.2 m and its hydraulic detention time averaged 5.2 days. Average height of the cattail stems was 42.5 cm in May 2M3 and 117.7 cm in September 2003. The number of stems averaged $9.5\;stems/m^2$ in May 2003 and $16.4\;stems/m^2$ in September 2003. The growth of cattails was good. Temperature of influent and effluent averaged 25.9 and $26.7^{\circ}C$, respectively. $NO_3$-N loading rate of influent and effluent averaged 176.67 and $88.09\;mg/m^2\;day$, respectively. Removal of rf03-N averaged $89.58\;mg/m^2\;day$ and its removal rate by mass was about 50%. Considering its initial operating stage in which cattail rhizomes and litter layer on the bottom were not Idly established, the $NO_3$-N removal rate of the cell was rather good.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.50 no.3
• /
• pp.244-251
• /
• 2014

This paper describes a prototype mechanical white noise generator has a source level of more than 170.0 dB (re $1{\mu}Pa$ at 1 m) at the frequency range of 10 Hz to 100 kHz. The results of performance evaluation of the generator are as follows. The average source level of the generator measured by a step of $15^{\circ}$ in horizontal (0 to $360^{\circ}$, 25 points) was 185.2 (SD (standard deviation): 2.3) dB (re $1{\mu}Pa$ at 1 m). The maximum and minimum source levels were appeared at the frequency range of 2.5 to 5.0 kHz and around 100 kHz, respectively. The average source levels at $0^{\circ}$, $90^{\circ}$, $180^{\circ}$ and $270^{\circ}$ were 162.9 (SD: 10.6), 168.4 (SD: 10.0), 162.1 (SD: 9.1) and 166.5 (SD: 11.1) dB (re $1{\mu}Pa$ at 1 m). The average source level measured by a step of $30^{\circ}$ in vertical was 184.9 (SD: 2.2) dB (re $1{\mu}Pa$ at 1 m). The relative maximum variation width of the source levels in horizontal and in vertical measurement were less than 7.0 dB and 1.0 dB, respectively.

• Journal of Korean Neurosurgical Society
• /
• v.38 no.3
• /
• pp.202-205
• /
• 2005

Objective : The purpose of this study is to measure the dimensions of foramen ovale and to localize the zygomatic point using computed tomography[CT] in Korean adults with idiopathic trigeminal neuralgia. Methods : Facial axial CT scans using the orbitomeatal plane were performed in 67patients [39males and 28females; mean age 58.8years] with idiopathic classic trigeminal neuralgia. We measured the size of the foramen ovale and localized the zygomatic point which was a skin marker over the ipsilateral zygoma that approximates the lateral projection of a straight line joining the centers of the two foramen ovale. Results : The axial dimensions of the foramen ovale on the orbitomeatal plane were of average length : $8.18{\pm}0.82mm$ [range $6.9{\sim}11.5mm$]. width : $4.06{\pm}0.86mm$ [$2.5{\sim}5.7mm$]. The average distance between the external acoustic meatus and the zygomatic point was $21.64{\pm}1.99mm$ [$16.3{\sim}25.0mm$] and the average distance of anterior margin of condylar process of mandible to zygomatic point was $4.29{\pm}1.19mm$ [$1.0{\sim}7.0mm$]. Conclusion : The anatomical understandings including the size of the foramen ovale and localization of the zygomatic point could be helpful in determining a plan of percutaneous approaches to foramen ovale.