• 전력전자학회논문지
• /
• 제19권2호
• /
• pp.133-138
• /
• 2014

This paper proposes a low power-loss averaging current mode control using a resistor and bypass switch. Generally, current sensing method using a resistor has a disadvantage of power loss which degrades the efficiency of the entire systems. On the other hand, proposed measurement technique operating with bypass-switch connected in parallel with sensing resistor can reduce power loss significantly the current sensor. An analog-circuited bypass driver is implemented and used along with an average-circuit mode controller. The bypass switch bypasses the sensing current with a small amount of power loss. In this paper, a 50[W] prototype average current mode boost converter has been implemented for the experimental verification.

• Journal of Power Electronics
• /
• 제14권1호
• /
• pp.40-47
• /
• 2014

An average current mode control scheme that consistently offers good dynamic performance for LLC series resonant DC-to-DC converters irrespective of the changes in the operational conditions is presented in this paper. The proposed control scheme employs current feedback from the resonant tank circuit through an integrator-type compensation amplifier to improve the dynamic performance and enhance the noise immunity and reliability of the feedback controller. Design guidelines are provided for both current feedback and voltage feedback compensation. The performance of the new control scheme is demonstrated through an experimental 150 W converter operating with 340 V to 390 V input voltage to provide a 24 V output voltage.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 하계학술대회 논문집 B
• /
• pp.1005-1008
• /
• 2001

This paper presents average current-mode control AC/DC ZVT(Zero Voltage Transition) Boost Converter. This boost converter perceives feed forward signal of input and feedback signal of output for average current-mode control proposed converter employs active-clamp method for ZVT. This converter gives the good PFC(Power Factor Correction), low line current hormonic distortions and tight output voltage regulations. This converter also has a high efficiency by active-clamp method. The principle of operation, feature, and design considerations are illustrated and verified through the experiment with a 150W, 120kHz prototype converter.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 1998년도 Proceedings ICPE 98 1998 International Conference on Power Electronics
• /
• pp.609-614
• /
• 1998

A new small signal modeling of an average current mode control is proposed. In order to analyze the characteristics of the control scheme, the discrete and continuous time small signal models are derived. The derivation are mainly come from the analysis of the sampling effect presented in the current control loop. By the mathematical interpretation of practical sampler representing the sampling effect of a current control loop, the small signal models of an average current mode control can be easily derived. The instability of the current control loop, which gives rise to the subharmonic oscillation, can be identified by the proposed models. To show the usefulness of the proposed models, the simulation and experiment are carried out. The results show that the predicted results by the proposed model are much better agreed with the measured ones than that of the conventional model, even though the high gain of the compensation network of a current control loop is employed.

• Journal of Power Electronics
• /
• 제12권5호
• /
• pp.715-722
• /
• 2012

New discrete time domain models for the peak current controlled (PCC) power LED drivers in continuous conduction mode include for the first time the effects of the time delay in the pulse-width-modulator. Realistic amounts of time delay are found to have significant effects on the average output LED current and on the critical inductor value at the boundary between the two conduction modes. Especially, the time delay can provide an accurate LED current for the PCC buck converter with a wide input voltage. The models can also predict the critical inductor value at the mode boundary as functions of the input voltage and the time delay. The overshoot of the peak inductor current due to the time delay results in the increase of the average output current and the reduction of the critical inductor value at the mode boundary in all converters. Experimental results are presented for the PCC buck LED driver with constant-frequency controller.

• 한국통신학회논문지
• /
• 제34권7C호
• /
• pp.681-686
• /
• 2009

H.264/Ave에서 p-프레임 부호화에 추가된 인트라 예측은 화질과 비트율 모두를 다소 개선시키고 있으나, 계산량을 크게 증가시키고 있다. 계산량의 증가를 줄이기 위해 본 논문은 최적 인트라 블록 모드가 매크로 블록의 영상 내용에 의존하는 특성을 이용한 영상 내용 기반 인트라 예측 부호화를 제안한다. 제안된 알고리즘은 영상 복잡도와 최적 인터 블록 모투로 매크로블록외 영상 내용을 평가하고, 영상 내용을 근거로 인트라 블록 모드를 선택하거나 배제한다. 모의실험 결과는 기존 알고리즘과 비교하여 제안된 알고리즘이 화질에서 평균 0.01 dB가 감소하교 비트휩l서 평균 0.38%가 증가하나, 부호화 계산 시간에서 평균 37.02% 의 큰 감소를 보여주고 있다.

• 경영과학
• /
• 제13권1호
• /
• pp.47-55
• /
• 1996

Rapid globalization of production and marketing functions makes choice of international transportation mode of great importance. In this paper, transportation mode is characterized by two factors, mean and variability of transportation lead time. We developed a simple mathematical model to estimate the relative impact of mean lead time, lead time variance and demand variance on the required average inventory level under specified service rates.

• 전기학회논문지
• /
• 제59권3호
• /
• pp.575-580
• /
• 2010

This paper is to design an optimum power conversion device for the system required for development of a low cost 3-phase power inverter. For this purpose, in order to meet with endurance required by the industry, failure mode is standardized to guarantee lifetime of a power semiconductor by monitoring real time power loss and to facilitate failure mode analysis. As normality of heat loss of a power semiconductor is identified remaining in a certain range by comparing heat rise slope between that is calculated by using average current or average loss and that is measured at a heat sink, its feasibility is confirmed by experiment.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제11권11호
• /
• pp.5360-5376
• /
• 2017

In this paper, we study the cross-layer design for the AMC/HARQ-based wireless networks, and propose a new dynamic transmission-mode selection scheme to improve system spectrum efficiency. In the proposed scheme, dynamic thresholds for transmission-mode selection in each packet transmission and retransmission are jointly designed under the constraint of the overall packet error rate. Comparing with the existing schemes, the proposed scheme is inclined to apply higher modulation order at the first several (re)transmissions, which corresponds to higher-rate transmission modes thus higher average system spectrum efficiency. We also extend the cross-layer design to MIMO (Multi-input Multi-output) communication scenarios. Numerical results show that the proposed new dynamic transmission-mode selection scheme generally achieves higher average spectrum efficiency than the conventional and existing cross-layer design.

• 대한간호
• /
• 제33권3호
• /
• pp.79-91
• /
• 1994

The purpose of this study was to identify the meaningful nursing diagnosis in maternity unit and to suggest formally the basal data to the nursing service with scientific approach. The subject for this paper were 64 patients who admitted to Chung Ang University Hospital, Located in Seoul, from Mar. 10, to July 21, 1993. The results were as follows: 1. The number of nursing diagnosis from 64 patients were 892 and average number of nursing diagnosis per patient was 13.9. 2. Applying the division of nursing diagnosis to Roy's Adaptation Model, determined nursing diagnosis from the 64 patients were 621 (69.6%) in physiological adaptation mode and (Comfort, altered r/t), (Injury, potential for r/t), (Infection, potential for r/t), (Bowel elimination, altered patterns r/t), (Breathing pattern, ineffective r/t), (Nutrition, altered r/t less than body requirement) in order, and 139 (15.6%) in role function mode, (Self care deficit r/t), (Knowledge deficit r/t), (Mobility, impaired physical r/t) in order, 122 (13.7%) in interdependence adaptation mode, (Anxiety r/t), (Family Process, altered r/t) in order, 10(1.1%) in self concept adaptation mode, (Powerlessness r/t), (Grieving, dysfunctional r/t) in order. 3. Nursing diagnosis in maternity unit by the medical diagnosis, the average hospital dates were 3.8 days in normal delivery and majority of used nursing diagnosis, (Comfort, altered r/t) 64.6%, (Self care deficit r/t) 13.6% in order, and the average hospital dates were 9.6 days in cesarean section delivery and majority of used nursing diagnosis, (Comfort, altered r/t) 51.6%, (Self care deficit r/t) 15.2%, (Infection, potential for r/t) 9.9%, (Injury, potential "for r/t) 8.1%, (Anxiety r/t) 5.0%, (Mobility, impaired physical r/t) 3.3% in order, and the average hospital dates were 15.8days in preterm labor and majority of used nursing diagnosis, (Comfort, altered r/ t), (Anxiety r/t), (Injury, potential for r/t) in order, and the average short-term hospital dates were 2.5days, long-term hospital dates were 11.5days in gynecologic diseases and majority of used nursing diagnosis, (Comfort, altered r/t). (Self care deficit r/t), (Injury, potential for r/t), (Infection, potential for r/t) in order.