DOI QR코드

DOI QR Code

The Analog-circuited Low-loss Bypass Current Sensing Method for Average Current Mode Control

아날로그 회로로 구현가능한 평균전류제어 저손실 bypass 전류센싱방법

  • Kim, Seok-Hee (Dept. of Electrical Engineering, Soongsil University) ;
  • Choi, Byung-Min (Dept. of Electrical Engineering, Soongsil University) ;
  • Park, Joung-Hu (Dept. of Electrical Engineering, Soongsil University) ;
  • Jeon, Hee-Jong (Dept. of Electrical Engineering, Soongsil University)
  • Received : 2013.08.28
  • Accepted : 2013.12.30
  • Published : 2014.04.20

Abstract

This paper proposes a low power-loss averaging current mode control using a resistor and bypass switch. Generally, current sensing method using a resistor has a disadvantage of power loss which degrades the efficiency of the entire systems. On the other hand, proposed measurement technique operating with bypass-switch connected in parallel with sensing resistor can reduce power loss significantly the current sensor. An analog-circuited bypass driver is implemented and used along with an average-circuit mode controller. The bypass switch bypasses the sensing current with a small amount of power loss. In this paper, a 50[W] prototype average current mode boost converter has been implemented for the experimental verification.

Keywords

References

  1. Hwa-Seok Lee, I. Daniel Thena Thayalan, Joung-Hu. Park, "Low Power-loss Current Measurement Technique Using Resistive Sensor and Bypass Switch," The Transactions of the Korean Institute of Power Electronics, pp. 416-419, Oct. 2012. https://doi.org/10.6113/TKPE.2012.17.5.416
  2. Do-Yun Kim, "Phase Current Sensing Method Using Three Shunt Resistor for Three Phase Inverter," 2011 Power Electronics Annual Conference, pp. 235-236, 2011.
  3. K.H Yeon, S.D Kim, D Son, "Current Sensor Based on Hall Sensor and Magnetic Core for Hybrid Vehicle," ICAUMS2010 International Conference of Aums, Dec. 5-8. 2010.
  4. Hwa-gene Lee, Kwon Soo Han, Kyu- Tae Kim, "Precision evaluation of High DC current shunt," 2011 KIEE Annual Conference, pp. 227-229, 2011.
  5. K-T. Kim, "Precise Measurement of High Current Shunt Resistance," 2005 KIEE Annual Conference, pp. 403-406, 2005.
  6. Min-Ho Song, "Current Measure using Fiber-Optic CT," KIIEE Annual Conference, pp. 28-33, July 2004.
  7. Ho-Gi Kim. Gu-Bae Kang. Dong-Jin Nam, "Coreless Hall Current Sensor for Automotive Inverters Decoupling Cross-coupled Field," Journal of Power Electronics, Vol. 9, No. 1, Jan. 2009.
  8. E. R. Olson and R. D. Lorenz, "Effective use of minaiature, multi-point, field-base current sensors witout magnetic cores," in Conf. Rec. IEEE-IAS Annu Meeting, pp. 1426-1433, 2007.
  9. Byung-Geuk Cho, Jung-Ik Ha, Seung-Ki Sul, "Voltage Injection Method for Boundary Expansion of Output Voltages in Three Shunt Sensing PWM Inverter," IEEE ECCE, pp. 411-415, 2011.
  10. Jung-Ik Ha, "Voltage Injection Method for Three-Phase Current Reconstruction in PWM Inverters Using a Single Sensor," IEEE Trans. Power Electronics, Vol. 24, Issue. 3, pp. 767-775, Mar. 2009. https://doi.org/10.1109/TPEL.2008.2009451
  11. R. P. Singh and A. M. Khambadkone. "Giant Magneto Resistive(GMR) Effect Based Current Sensing Technique for Low Voltage/High Current Voltage Regulator Modules," IEEE Trans. Power Electron., Vol. 23, pp. 915-925, Mar. 2008.
  12. N. McNeill, G. Iordanidis, D. Holliday, and P. Mellor, "Low-cost high-bandwidth current transducer for automotive applications," IEEE Trans. Power Electron, Vol. 21, pp. 832-835, Sep. 2006. https://doi.org/10.1109/TPEL.2006.875564
  13. Ji-Hoon Jang, Seung-Ki Sul, Yo-Chan Son, "Current Measurement Issues in Sensorless Control Algorithm using High Frequency Signal Injection Method," IEEE IAS Annual Meeting, Vol. 2, pp. 1134-1141. 2003.
  14. Bob Mammano, "Current Sensing Solutions for Power Supply Designers," 2001 Texas Instruments Incorporated document.
  15. Texas Instruments "Understanding Data Converters," Application report, 1995.
  16. Doo-Yong Jung, "Soft Switching Boost Converter using a Single Switch," 2009 Power Electronics Annual Conference, pp. 211-219, 2009.
  17. Jin-Bae Kim, "Soft Switching DC/DC Converter Using Boost," 2009 Power Electronics Annual Conference, pp. 436-437, 2009.