• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1995년도 추계학술대회 논문집 학회본부
• /
• pp.128-130
• /
• 1995

This paper presents the optimal operation scheduling on cogeneration systems connected with auxiliary equipment by using the possibility fuzzy theory. The probability fuzzy theory is a method to obtain the possibility of the solution from the fuzzification of coefficients. Simulation is carried out to obtain the boundary of heat production in each time interval. Simulation results shows effectively the flexible operation boundary to establish operation scheduling.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 춘계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.172-175
• /
• 2005

Recently international regulations governing the amount of harmonic currents(e.g IEC 61000-3-2) became mandatory and active Power factor correction (PFC) pre-regulator circuit became inevitable for the AC/DC converters. Among these topologies, the boost topology represents an optimum solution for a PFC pre-regulation in a high power application. This paper propose improved ZVT(Zero Voltage Transition) AC/DC PFC Boost using the average current control employing a soft-switching technique of the auxiliary switch with a minimum number of components. The conventional ZVT PFC Boost Converter has a disadvantage that the auxiliary switch turns off hard, which influences the overall efficiency and the EMI problem. In this paper, an improved ZVT PFC Boost converter using active snubber is proposed to minimize the switching loss of the auxiliary. The prototype of 100kHz, 640W system was implemented to show the improved performance.

• 전기학회논문지
• /
• 제64권12호
• /
• pp.1810-1817
• /
• 2015

The railway vehicle has an auxiliary power unit for supplying power to the associated electronic control devices and passenger service unit. Typically, input voltage from the catenary for rolling stock is highly fluctuating according to the substation capacity, vehicle propulsion and regeneration. Especially, the frost and freezing on contact wire in winter can cause a blackout inside vehicle, and also brings about electronic components damaging and the system down. To prevent this problem, a large filter and capacitor is used. But this is not a perfect solution, because it is increasing weight of the unit. In this paper, a new algorithm is proposed to suppress the disturbance without adding devices. Simulation and experimental results show that the proposed algorithm has performance to suppress the disturbance at the sudden input voltage variations.

• Smart Structures and Systems
• /
• 제18권1호
• /
• pp.139-154
• /
• 2016

This paper is concerned with the dynamics of hyperelastic solids and structures. We seek for a smart control actuation that produces a desired (prescribed) displacement field in the presence of transient imposed forces. In the literature, this problem is denoted as displacement tracking, or also as shape morphing problem. One talks about shape control, when the displacements to be tracked do vanish. In the present paper, it is assumed that the control actuation is provided by imposed eigenstrains, e.g., by the electric field in piezoelectric actuators, or by thermal actuators, or via analogous physical effects, such as magneto-striction or pre-stress. Structures with a controlled eigenstrain-type actuation belong to the class of smart structures. The action of the eigenstrains can be conveniently characterized by actuation stresses. Our theoretical derivations are performed in the framework of the theory of small incremental dynamic deformations superimposed upon a statically pre-deformed configuration of a hyperelastic solid or structure. We particularly ask for a distribution of incremental actuation stresses, such that the incremental displacements follow exactly a prescribed trajectory field, despite the imposed incremental forces are present. An exact solution of this problem is presented under the assumption that the actuation stresses can be tailored freely and applied everywhere within the body. Extending a Neumann-type solution strategy, it is shown that the actuation stresses due to the distributed control eigenstrains must satisfy certain quasi-static equilibrium conditions, where auxiliary body-forces and auxiliary surface tractions are to be taken into account. The latter auxiliary loading can be directly computed from the imposed forces and from the desired displacement field to be tracked. Hence, despite the problem is a dynamic one, a straightforward computation of proper actuator distributions can be obtained in the framework of quasi-static equilibrium conditions. Necessary conditions for the functioning of this concept are presented. Particularly, it must be required that the intermediate configuration is infinitesimally superstable. Previous results of our group for the case of shape control and displacement tracking in linear elastic structures are included as special cases. The high potential of the solution is demonstrated via Finite Element computations for an irregularly shaped four-corner plate in a state of plain strain.

• 대한수학회보
• /
• 제43권4호
• /
• pp.791-804
• /
• 2006

This paper is concerned with a second-order iterated differential equation of the form $c_0x'(Z)+c_1x'(z)+c_2x(z)=x(az+bx(z))+h(z)$ with the distinctive feature that the argument of the unknown function depends on the state. By constructing a convergent power series solution of an auxiliary equation, analytic solutions of the original equation are obtained.

• 대한수학회지
• /
• 제59권1호
• /
• pp.53-69
• /
• 2022

In this paper, we are concerned with a class of mixed Hessian curvature equations with non-degeneration. By using the maximum principle and constructing an auxiliary function, we obtain the interior gradient estimate of (k - 1)-admissible solutions.

• 분석과학
• /
• 제8권4호
• /
• pp.435-442
• /
• 1995

A matrix modification was studied for the determination of trace bismuth in water samples by graphite furnace atomic absorption spectrophotometry. The type and quantity of modifiers as well as the use of auxiliary modifiers were investigated to realize the efficient modification. Palladium was chosen as a single modifier. By the addition of palladium($5{\mu}g/mL$) to 100 ng/mL bismuth solution, the temperatures could be raised from $500^{\circ}C$ to $1,300^{\circ}C$ for the charring and from $2,000^{\circ}C$ to $2,200^{\circ}C$ for the atomization as well as the sensitivity and reproducibility were improved. The absorbance of bismuth was maximum and not changed in the range of Pd $3-25{\mu}g/mL$. And several materials were examined as an auxiliary modifier. The mixed solution of $1{\mu}g/mL$ palladium and $200{\mu}g/mL$ nickel have raised the temperatures as with $5{\mu}g/mL$ palladium only. The maximum absorbance of bismuth was shown in the nickel concentration range of $100-300{\mu}g/mL$ in $1{\mu}g/mL$ palladium modified system. With such optimum conditions, the trace amount of bismuth in several water samples could be determined by a calibration curve method, and good recoveries were also obtained.

• 대한화학회지
• /
• 제15권6호
• /
• pp.347-352
• /
• 1971

The variations of the positive and negative electrode potentials, and of internal pressure were measured during the charge of the sealed type Ni-Cd cell. Both polarization characteristics of a paste type Cd-electrode as a gas diffusion electrode in 30% KOH solution and the effects of active carbon electrode as an oxygen consuming auxiliary electrode of the Ni-Cd cell on the charging characteristics of the cell were studied. Peak voltage at the end of charge of the cell is ascribed to the peak at the negative electrode potential, which is due to the concentration polarization by the lack of $Cd^{++}$ ion and oxygen concentration. And the recovery of the negative electrode potential is resulted from depolarization by the increasing diffusion limiting current density with the increasing oxygen pressure. The active carbon electrode was effective as an oxygen consuming auxiliary electrode. The internal pressure of the cell could be maintained below 200mmHg even at one hour rate charge and overcharge by the use of active carbon electrode as an auxiliary electrode.

• 대한전기학회논문지:전력기술부문A
• /
• 제50권3호
• /
• pp.120-130
• /
• 2001

We present an approach to parallelizing optimal power flow that is suitable for distributed implementation and is applicable to very large interconnected power systems. This approach can be used by utilities to optimize economy interchange without disclosing details of their operating costs to competitors. Recently, it is becoming necessary to incorporate contingency constraints into the formulation, and more rapid updates of telemetered data and faster solution time are becoming important to better track changes in the system. This concern led to a research to develop an efficient algorithm for a distributed optimal power flow based on the Auxiliary Problem Principle and to study the convergence rate improvement of the distributed algorithm. The objective of this paper is to find a set of control parameters with which the Auxiliary Problem Principle (Algorithm - APP) can be best implemented in solving optimal power flow problems. We employed several IEEE Reliability Test Systems, and Korea Power System to demonstrate the alternative parameter sets.

• Journal of Korean Biological Nursing Science
• /
• 제17권2호
• /
• pp.150-158
• /
• 2015

Purpose: This study aimed to evaluate the effects of gargling with S-solution and gargling with A-solution on salivary pH, coated tongue, and dental plaque index in preschool children. Methods: Non-equivalent control group pretest-posttest design was used to select the participants. 99 preschool children were divided into three groups. Dependent variables were recorded at baseline, 30 minutes, and 7 days after the first treatment was given. The data were analyzed using $X^2$-test, ANOVA, and repeated measures of ANOVA. Results: There were no significant differences in dependent variables in pre-test. However, the salivary pH in the S-solution group had significantly increased after 30 minutes (p<.05) and then again 7 days (p<.01) after the first treatment. Also, the S-solution and A-solution groups had greater decrease in dental plaque index after 30 minutes and again 7 days after the first treatment (p<.001) than the control group. With respect to coated tongue, there were no significant differences among the three groups. Conclusion: The results of this study indicate that essential oil gargling after brushing is helpful in improving oral health due to auxiliary oral hygiene effects with natural products. Specifically, gargling with S-solution is more effective than A-solution on oral health in preschool children by neutralizing salivary pH and reducing dental plaque index.