• Journal of Korea Society of Industrial Information Systems
• /
• v.11 no.2
• /
• pp.69-78
• /
• 2006

This paper is concerned with analyzing the images of Korean automobiles using, so called, sensory engineering, which adapts the sensory and subjective assessment of human beings in evaluating the quality of product. The methodology of analysis is suggested in this paper according to the following steps. First, 14 pairs of adjectives, which describe the image of object cars in view of the semantic differential method, are derived from consulting with several expert panels. Nextly, factor analysis is performed in order to obtain the axises, by which the images space of the object automobiles are specified, and then the images of the object automobiles are measured by the coordinate of all the object automobiles in the image space. In this paper, a sensory estimation experiment is performed to a panel consisting with In undergraduate students residing in the region of Daegu. From the result of analysis of this paper, target images, which the automobile manufacturers are intended, are achieved by and large except one company.

• Journal of the Korean Applied Science and Technology
• /
• v.34 no.4
• /
• pp.974-985
• /
• 2017

Although the number of registered cars in South Korea is about 22million but, there is no national standard for automobile reference fuel in South Korea. Reference fuel is the fuel used for certificating vehicle performance, emissions and fuel economy. Now, domestic market fuels are used as reference fuel. However, the quality of domestic market fuel is constantly changing by seasonal and fuel manufacturers. It may effect vehicle performance, emissions and fuel efficiency test result. On this study, market diesel fuel quality was monitored and reference fuel standard(draft) was set by reflecting market fuel monitoring result. Reference fuel standard(draft) was applied to CRDI engine.

• Tribology and Lubricants
• /
• v.35 no.5
• /
• pp.267-273
• /
• 2019

Wheel bearings are important automotive parts that bear the vehicle weight and translate rotation motion; in addition, their seals are components that prevent grease leakage and foreign material from entering from the outside of the bearings. Recently, as the need for electric vehicles and eco-friendly vehicles has been emerging, the reduction in fuel consumption and $CO_2$ emissions are becoming the most important issues for automobile manufacturers. In the case of wheel bearings, seals are a key part of drag torque. In this study, we investigate the prediction of the drag torque taking into consideration the hyperelastic and viscoelastic material properties of automotive wheel bearing seals. Numerical analysis based on the finite element method is conducted for the deformation analyses of the seals. To improve the reliability of the rubber seal analysis, three types of rubber material properties are considered, and analysis is conducted using the hyperelastic material properties. Viscoelastic material property tests are also conducted. Deformation analysis considering the hyperelastic and viscoelastic material properties is performed, and the effects of the viscoelastic material properties are compared with the results obtained by the consideration of the hyperelastic material properties. As a result of these analyses, the drag torque is 0.29 Nm when the hyperelastic characteristics are taken into account, and the drag torque is 0.27 Nm when both the hyperelastic and viscoelastic characteristics are taken into account. Therefore, it is determined that the analysis considering both hyperelastic and viscoelastic characteristics must be performed because of its reliability in predicting the drag torque of the rubber seals.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2016.10a
• /
• pp.221-223
• /
• 2016

Currently in the automobile market, models with many convenient functions combined with IT have been released. This change has a strength that there could be many convenient and useful functions related to driving while flaws of vehicles caused by malfunctions of these electronic equipments could trigger serious incidents. Among them, the sudden unintended acceleration considered as the most serious is a serious flaw that could threaten driver's life. However, the causes for sudden acceleration incidents have not been clearly investigated with no coping measures. As manufacturers shift the responsibility to drivers' carelessness, drivers' burden is continuously increasing. Thus, this paper designed the system to cope with sudden acceleration incidents by changing conditions of controlling parts like accelerator and brake, and internal image of the driver's seat into data through the integrated module.

• Journal of Auto-vehicle Safety Association
• /
• v.6 no.1
• /
• pp.5-9
• /
• 2014

Over the past ten years, since the introduction of the side crash test regulation in Europe, much research work has been performed internationally to develop new and modified test procedures to improve the level of occupant protection offered by vehicles in side crash test. This research has been co-ordinated and finally contributed to development of an AE-MDB(Advanced European Moving Deformable Barrier) and WorldSID (Worldwide Side Impact Dummy). EuroNCAP(European New Car Assessment Program) has the plan to conduct AE-MDB side crash test using WorldSID from 2015 by replacing Progressive MDB and EuroSID II. Automobile manufacturers need to respond to these changes closely. This paper is to find dominant control factor and analyze it of WorldSID 50%ile dummy injury through AE-MDB side crash test by predicting best and worst condition. And control factors will be validated within EuroNCAP regulations. This paper is analyzed by DFSS(Design for six sigma) which contains 5 control factors and is evaluated by ANOVA with the data as a result of LS-DYNA analysis correlated with crash pulse from 50 kph AE-MDB side crash test using WorldSID 50%ile dummy.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2021.05a
• /
• pp.267-270
• /
• 2021

In order to diagnose a vehicle, it is achieved by collecting diagnostic data within the ECU or between ECUs and managing the diagnostic data by utilizing various communication methods through an electronic device composed of an ECU(Electronic Control Unit), which is an automotive electronic device. As communication methods, LIN, CAN, FlexRay are mainly used. Recently, wired/wireless communication is being used based on Ethernet. In order to perform vehicle diagnosis, it is necessary to know the diagnosis code generated by the ECU and to collect diagnosis data using diagnosis communication. In addition, diagnostic data can be managed from the ECU only when the application software required for vehicle diagnosis is configured. If many automobile manufacturers are manufacturing ECUs based on the AUTOSAR standard, which is an automotive electronic standard, the software structure is also configured to be applied according to the standard. In this paper, we understand the vehicle diagnosis communication method of the AUTUSAR standard, study the configuration and processing method of diagnosis data, and study the contents of software components, diagnosis communication, and diagnosis event processing.

• Design & Manufacturing
• /
• v.16 no.2
• /
• pp.1-6
• /
• 2022

As environmental regulations are strengthened, automobile manufacturers continuously research lightweight structures based on carbon fiber reinforced plastic (CFRP). However, it is difficult to see the effect of strength reinforcement when using a single CFRP material. To improve this, a hybrid laminate in which CFRP is mixed with the existing body structural steel was proposed. In this paper, CFRP patch reinforcement is applied to each compression/tensile action surface of a 22MnB5 metal sheet, and it was evaluated through a 3-point bending experiment. Progressive failure was observed in similar deflection on bending deformation to each one-sided reinforced specimen. After progressive failure, the tensile reinforced specimen was confirmed to separate the damaged CFRP patch and 22MnB5 sheet from the center of the flexure. The compression reinforced specimen didn't separate that CFRP patch and 22MnB5, and the strength reinforcement behavior was confirmed. In the compression reinforced specimen, damaged CFRP patches were observed at the center of flexure during bending deformation. As a result of checking the specimen of the compression reinforcement specimen with an optical microscope, It is confirmed that the damaged CFRP patch and the reinforced CFRP patch overlapped, resulting in a concentrated load. Through the experimental results, the 22MnB5 strength reinforcement characteristics according to the reinforcement position of the CFRP patch were confirmed.

• Journal of Auto-vehicle Safety Association
• /
• v.16 no.3
• /
• pp.64-71
• /
• 2024

With the advent of Level 4 autonomous vehicles, the need for effective communication between these vehicles and pedestrians has become increasingly important. To address this, eHMI (Enhanced Human-Machine Interface) technology has been proposed to replace traditional driver-pedestrian interactions. eHMI plays a crucial role in conveying the vehicle's status and intentions to pedestrians, thereby improving interaction. Globally, automobile manufacturers and technology companies are investing in visual eHMI technologies, advancing in tandem with the automotive industry. This study developed a methodology for field evaluation of communication technologies between pedestrians and Level 4 autonomous vehicles in urban settings. A three-stage message and display system, tailored to the pedestrian crossing process (recognition, judgment, response), was established. In experiments without message displays, 42.2% (38 out of 90) of participants abandoned crossing. Most who crossed did so only after the vehicle stopped, with some groups crossing irrespective of vehicle approach. When the 'yield' message was introduced, crossing patterns and speed distributions changed significantly. All 38 participants who initially abandoned crossing decided to cross, and the elderly who previously ran or walked quickly crossed at a normal pace, reducing overall crossing time. Field experiments are crucial as real-world conditions may elicit different behaviors than controlled settings. Continued research in field evaluations is essential to develop and assess effective eHMI messages. By observing and analyzing actual pedestrian movements, we can reliably evaluate the effectiveness of these communication technologies, thereby enhancing interaction between autonomous vehicles and pedestrians.

• Journal of Korean Society of Environmental Engineers
• /
• v.28 no.4
• /
• pp.421-428
• /
• 2006

Systematic improvement of the environmental performance of industrial products is a core element of good business. Improving the overall environmental performance of products is envisaged as one of the most important strategic goals and objectives in many company policies. This paper demonstrates an Ecodesign approach to develop a product in a systematical way. The objective of this research is two-folds-describing a systematic procedure of implementing Ecodesign in a company and giving a real case example to demonstrate the application of the proposed Ecodesign methodology. The methodology was based on Wimmer et al and consists of seven steps out of the twelve steps for integrating significant environmental aspects of a product and environmental issues resulting from the stakeholder requirements into product design and development. Together with the Ecodesign team of a major domestic car manufacturer the Ecodesign of a car fuel tank unit has been chosen for the case study presented in the paper. The application of the proposed methodology to the fuel tank unit of a car indicates that practical target specifications of the fuel tank unit were derived systematically. This indicates that the seven steps approach can be a viable Ecodesign method for manufacturers to integrate environmental aspects of their products into their product design and development processes.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.8
• /
• pp.355-360
• /
• 2017

Recently, with the development of autonomous vehicle technology, the importance of precise road maps is increasing. A precise road map is a digital map with lane information, regulations, safety information, and various road facilities. Conventional precise road maps have been tested and developed based on the mobile mapping system (MMS). But they have not been activated due to high introduction costs. However, in the case of unmanned aerial vehicles (UAVs), the application field is continuously increasing. This study tries to extract information through classification of high-resolution UAV images for autonomous driving. Autonomous vehicle test roads were selected as study sites, and high-resolution orthoimages were produced using UAVs. In addition, the utilization of high-resolution orthoimages has been proposed by effectively extracting data for precise road map construction, such as road lines, guards, and machines through image classification. If additional experimentation and verification are performed, the field of UAV image use will be expanded, providing the data to automobile manufacturers and related public and private organizations, and venture companies will contribute to the development of domestic autonomous vehicle technology.