• Proceedings of the KIEE Conference
• /
• 2005.10b
• /
• pp.445-447
• /
• 2005

MCMA(modified constant modulus algorithm) accomplishes blind equalization and carrier phase recovery simultaneously. But, the error level of MCMA is not zero when the equalizer converges completely. Because the MCMA uses a special signal point instead of a original signal point. MCMA-DO(decision-directed) improves the steady-state performance but the performance of equalizer is decided by switching time between the MCMA and the DD. In this paper, according to the residual ISI(intersymbol interference) of the equalizer output, the most suitable switching time is decided automatically.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.45 no.1
• /
• pp.66-71
• /
• 2008

In this paper, an antenna-switching scheme using negative acknowledgement for hybrid automatic repeat request (H-ARQ) is proposed and analyzed in the Vertical Bell Labs Layered Space-Time(V-BLAST) system, in which the transmit antenna is alternatively switched under retransmission. By analytically evaluating the channel capacity of the proposed scheme over correlated fading channels, it is shown that the adverse effect of the channel correlation is alleviated by the antenna switching scheme. Simulation results demonstrate that the average throughput may be improved in a correlated fading channel without adding much complexity to the process.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.12 no.1
• /
• pp.51-57
• /
• 1998

This paper proposed a novel SIT high frequency resonant inverter having drive signal phase shift control function. Phasor control type inverters using SIT can realize a power conversion on the high switching frequency with low switching loss. Especially, the high output power can be abstained by connecting the output voltage of two unit inverters In serIes. The stability of system using protection circuit for over current and the automatic follow-up control with load variation by PLL is presented. This inverter produce approximately sinusoidal waveform at a high frequency, switching frequency ranging from 180[kHz] to 220[kHz], and is applied to the 2[kW] induction heating. The operating characteristics of this inverter circuit are discussed from a theoretical point of view and compared with experimental results. results.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.20 no.12
• /
• pp.30-35
• /
• 2021

In this study, we developed an automatic module changer for agricultural implements for using in unmanned agricultural robots. An automatic module changer is attached by lowering from the top to bottom of the implements and fixing the four fastener bars attached to the implements in combination. The lift function was implemented using seesaw-type structures to keep the engagement point constant when the automatic module changer climbs and descends, and the switching function of the automatic module changer was implemented using the link device in the cam structure. We developed an algorithm to check the presence of attachment and opening/closing of the workpiece using limit switches and verified the performance through combination assessment and weight lift test to assess whether the combination was within the error range.

• Information and Communications Magazine
• /
• v.18 no.11
• /
• pp.33-43
• /
• 2001

본 고에서는 광인터넷에 대하여 현재까지 IETE, ITU-T 및 OIF(Optical Internet Forum)을 중심으로 최근에 활발하게 추진되고 있는 표준화 동향을 살펴본다. 특히 광을 기반으로 MPLS(Milti-Protocol Label Switching) 기술을 적용하려는 Generalized MPLS 기술을 중심으로 분석한다. 먼저 IETE에서 MPLS 기술을 중심으로 분석하다 먼저 IETF에서 MPLS WG에서 기본 MPLS 기술에 대한 표준을 지속적으로 작업하고 있으며 여기에서의얻은 기술을 바탕으로 IPO Wg과 CCAMP WG 등에서 광 네트워크 구조를 제안하고 있으며 여기에 새로운 시그널링과 계층적 경로 설정 메커니즘 및 신뢰성 있는 보호/복구 등의 부가적이 기능들을 추가하기 위한 작업을 하고 있다 또한 OIF 에서는 UNI 신호 규격을 정하고 있으며 ITU-T에서 광 전달 네트워크 (OTN)와 관련하여 ASTN/ASON(Automatic Switched Transport Network/Automatic Switched Optical Network)을 포함하여 광 네트워크에 대한 구조적 측면뿐만 아니라 전송 및 망 관리 측면에 대학 규격을 제정 중에 있다.

• 제어로봇시스템학회:학술대회논문집
• /
• 2004.08a
• /
• pp.238-242
• /
• 2004

The paper describes an automatic frequency control current-fed inverter for forging applications. The IGBT in series with diodes as its switching devices in the inverter circuit which is of full-bridge type. The operating frequency is automatically tracked to maintain a small constant leading phase angle when load parameters change. The load voltage is controlled to protect the switches. The output power can be adjusted by varying the input current from phase controlled rectifiers which is a part of current source. The system has been operated at 15-17 kHz. The output power transferred to the load is 1,595 watts. It can heat the steel work pieces with 15 mm diameter and 120 mm long from room temperature to approximately 1100 $^{\circ}C$ within 20 seconds with 0.97 leading power factor on the input side.

• Journal of international Conference on Electrical Machines and Systems
• /
• v.3 no.4
• /
• pp.415-421
• /
• 2014

In this paper, reactorless high efficiency boost DC/DC converter for EV is proposed. In proposed converter, improves efficiency because decrease power loss when the switches are turned on/off using zero current switching (ZCS) at all switch of primary full bridge. By replacing reactance ingredients of L-C resonance circuit for ZCS with leakage inductance ingredients of high frequency transformer, it reduces system size and expense because of not add special reactor. For validity verification of proposed converter, in the paper implements simulation using PSIM and perform experiment by making 5KW DC/DC converter. In experimental results, efficiency of proposed converter conformed superiority.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.29 no.11
• /
• pp.47-52
• /
• 2015

This paper derives the problems that occur when asynchronous transfer in case of phase, frequency, voltage between the emergency generator and the grid and proposed the countermeasure to solve this problem when the transfer switch replace ATS(Automatic Transfer Switch) with CTTS(Closed Transition Transfer Switch) for the non-interrupting switching. In order to simulate above cases, modelling was used the transient analysis program PSCAD/EMTDC. By using this, the customer installed emergency generator and the grid was implemented. We compared three cases of asynchronous transition based on the basic case and proposed improvement by controlling the governor of emergency generator.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.10C
• /
• pp.1042-1050
• /
• 2007

This paper describes the system which automatically generates power-minimized embedded cores from MDL descriptions. An automatic generation system is constructed which generated embedded cores which consumes less power for application programs. From the usage information on pipeline stages for each instruction, the proposed system generates embedded cores with the capability of detecting/resolving pipeline hazards. The generated cores are configured such that the power consumption is minimized. The proposed system has been tested by generating HDL codes for ARM9, MIPS R3000 architectures. Experimental results show functional accuracy of the generated cores, and show that power reduction of $20%{\sim}40%$ has been observed for benchmark programs.

• Proceedings of the IEEK Conference
• /
• 2000.09a
• /
• pp.935-938
• /
• 2000

본 논문에서는 음성 인식을 이용하여 전화를 교환해주는 자동 교환 시스템을 구현하고, 성능을 평가하였다. 구현된 시스템에는 필수적인 음성인식 이외에도 DSP 진단 기능, 인식 대상 어휘의 추가 및 변경기능, 음성 수집 기능 등이 구현 되었다. SCHMM (Semi-Continuous Hidden Markov Model)을 이용한 전화망에서의 화자 독립 고립 단어 가변 어휘 인식을 대상으로 하였으며, 실시간 구현을 위하여 Texas Instrument 사의 TMS320C32를 사용하였다〔6〕. 인식 어휘는 부서명 및 인명이고 1300여 단어일 때, 인식 성능은 91.5%이다.