• Journal of the Korean Society of Marine Environment & Safety
• /
• v.24 no.4
• /
• pp.467-474
• /
• 2018

The purpose of this study is related to automatic hull-form design for ships operating at two speeds. Research was conducted using a series 60 ($C_B=0.6$) ship as a target, which has the most basic ship hull-form. Hull-form development was pursued from the viewpoint of improving resistance performance. In particular, automatic hull-form design for a ship was performed to improve wave resistance, which is closely related to hull-forms. For this purpose, we developed automatic hull-form design software for ships by combining an optimization technique, resistance prediction technique and hull-form modification technique, appling the software developed to a target ship. A sequential quadratic programming method was used for optimization, and a potential-based panel method was used to predict resistance performance. A Gaussian-type modification function was developed and applied to change the ship hull-form. The software developed was used to design a target ship operating at two different speeds, and the performance of the resulting optimized hull was compared with the results of the original hull. In order to verify the validity of the program developed, experimental results obtained in model tests were compared with calculated values by numerical analysis.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.27 no.4
• /
• pp.620-627
• /
• 1990

A software tool implementing cascaded SCF (Switched Capacitor Filter) is developed. A comprehensive procedure is described for the design of cascaded SCF, and some design considerations are discussed. In program several user-selectable filter approximation techniques, and two optimising methods which reduce the total capacitance are included. Analysis of the partial positive feedback and the effect of clock frequency to total capacitance are presented in detail. Two pratical examples are given to prove its validity in reducing the total capacitance. Developed tool can be used for general SCF generator.

• Wind and Structures
• /
• v.21 no.6
• /
• pp.727-753
• /
• 2015

A double-skinned composite tubular (DSCT) wind power tower was suggested and automatic section design software was developed. The developed software adopted the nonlinear material model and the nonlinear column model. If the outer diameter, material properties and design capacities of a DSCT wind power tower are given, the developed software performs axial force-bending moment interaction analyses for hundreds of sections of the tower and suggests ten optimized cross-sectional designs. In this study, 80 sections of DSCT wind power towers were designed for 3.6 MW and 5.0 MW turbines. Moreover, the performances of the 80 designed sections were analyzed with and without considerations of large displacement effect. In designing and analyzing them, the material nonlinearity and the confining effect of concrete were considered. The comparison of the analysis results showed the moment capacity loss of the wind power tower by the mass of the turbine is significant and the large displacement effect should be considered for the safe design of the wind power tower.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.19 no.1
• /
• pp.81-89
• /
• 2015

This study takes shear wall of reinforced concrete structure as study object, and the purpose of this study is to suggest structure BIM based on automatic reinforcing bar placement system applying set-based design through the most optimum reinforcing bar placement group that was selected by applying AHP (analytical hierarchy process) method from design step. For this, the most optimum reinforcing bar placement group was selected by pairwise comparison analysis on complex standard of multiple alternatives. And shear wall automatic reinforcing bar placement system has been developed, which can automatically generate members and arrange reinforcing bar by structure design algorithm and using open API (application programming interface) provided by a BIM software vendor. As a result, the most optimum reinforcing bar placement group of the highest weight, ALT1, was selected and was generated using Tekla Structure program.

• Nuclear Engineering and Technology
• /
• v.27 no.3
• /
• pp.385-392
• /
• 1995

A software engineering process has been developed for the design of safety critical software for Wolsong 2/3/4 project to satisfy the requirement of the regulatory body. Among the process, this paper described the detail process of validation testing peformed to ensure that the software with its hardware, developed by the design group, satisfies the requirements of the functional specification prepared by the independent functional group. To perform the test, test facility and test software ore developed and actual safety system computer was connected. Three kinds of test cases, i.e., functional test performance test and self-check test were programmed and run to verify each functional specifications. Test failures ore fedback to the design group to revise the software and test result were analyzed and documented in the report to submit to the regulatory body. The test methodology and procedure were very efficient and satisfactory to perform the systematic and automatic test. The test results were also acceptable and successful to verify the software acts as specified in the program functional specification. This methodology can be applied to the validation of other safety-critical software.

• Journal of Platform Technology
• /
• v.11 no.5
• /
• pp.3-15
• /
• 2023

Requirements traceability link information is the basis for determining whether requirement change requested throughout the software development life cycle should be reflected in the system. Setting up complete requirements traceability links requires considerable effort. However, the commensurate benefits can be obtained in later development or further maintenance phases. For this reason, setting up and managing requirements traceability links in the software development phase are tasks that cause considerable resistance to developers. This study proposes a method for generating requirement traceability links in business applications. The key feature of the proposed method is that the traceability link from the requirements element, which is the basis of the corresponding element to the analysis element, is automatically established at the same time the elements of the analysis model are identified. This can be a way to reduce developer effort while increasing the efficiency of the traceability model. A case study on a Course Registration System demonstrates the feasibility of applying the proposed requirements traceability management method to actual software development.

• IEIE Transactions on Smart Processing and Computing
• /
• v.3 no.2
• /
• pp.74-82
• /
• 2014

Automatic identification is pervasive in many areas and its applicable areas are increasing gradually. 2D bar-code, NFC, and RFID technologies are representative examples of the automatic identification. This paper explains the implementation of mobile tourism application software on RFID technology. The mobile application provides the location and navigation information by combining the tag inventory and web database. The interactions among the user, application and database server are described in detail. This paper proposes a simple way of minimizing the efforts to build the entire system by storing the URLs for the tag and accessing existing tourism information services through the URLs.

• Korean Journal of Computational Design and Engineering
• /
• v.10 no.1
• /
• pp.11-16
• /
• 2005

CAD/CAM system may have such advantages of cost reduction, production time shortening, and product quality improvement. But current advanced versions of CAD/CAM system for 3-D NC data generation are too much expensive to purchase and too difficult to make full use for small-scale manufacturers whose main products are of 2-D simple shapes. The objective of this paper is to introduce a cost-effective way to 2-D NC data generation with a widely spread CAD software. Using VISUAL LISP in the well-known AUTO-CAD, the contents and steps of an automatic NC data generation program are presented for 2-D machining of contours and pockets. To approve the usefulness of program, a test application to a real part is exhibited also.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.15 no.4 s.40
• /
• pp.453-461
• /
• 1991

The purpose of this research was to develop an automatic design with dialogue function in computer for pants pattern making. AutoCAD including AutoLISP was the programable software package, so AutoCAD were used basically for this research. The conclusions were like these; 1. Dialogue functions of computer allowed the designer to choose emotional elements. 2. The coordinate points needed in drafting for women's pants pattern making were suggest-ed by numerical fomula. So, if the input data of body sizes needed were used, pants patterns for person were automatically obtained as the output. 3. The several curvature parts were presented by using exponent function and the arc drawing of AutoCAD and the degree of bends were to be selected by choosing the simple parameter of algebraic function and arc AutoCAD command. 4. The program permited pattern manipulation and pattern grading of five standard sizes were presented. Also its flow chart by AutoLISP with dialogue function were presented.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2009.10a
• /
• pp.420-421
• /
• 2009

According as the industry develops recently, the import and export freight amount is increasing sharply, but physical distribution processing equipment ability had achieved conveyance, surge and setup of physical distribution by human's labor ability. This study intends to discuss the Design of Automatic Distribution System. Study is consisted hardware structure and software control system.