• The Journal of the Korea institute of electronic communication sciences
• /
• v.15 no.5
• /
• pp.913-922
• /
• 2020

In this paper, we propose a LoRa communication module using the LoRa RF module of Murata Electronics is designed to configure the IoT digital meter remote meter reading and a method of configuring a remote meter reading network by collecting multiple meter data in a DCU (Data Concentrate Unit) to configure a network with LoRaWAN. The developed system can be installed more easily and economically in the network configuration than the existing system by allowing the meter to be directly connected to the network or matched with a DCU to connect to the network according to the configuration of the consumer. The developed system was constructed using a digital water meter as an example, but it can also be applied to remote meter reading of the metered values of other meters such as electricity, water, gas, hot water and calorie meters. The main development contents are the design, configuration, and construction of digital meters, LoRa modules and DCUs, and how to connect the LoRaWAN network and transmit meter data to the server. By networking these devices, the system is configured, and the actual LoRaWAN communication is tested and the result is shown.

• Journal of KIISE:Information Networking
• /
• v.32 no.1
• /
• pp.100-109
• /
• 2005

A Mobile Ad-Hoc Network (MANET) supports a multi-hop wireless network without any prepared base station (BS). The MANET is capable of building a mobile network automatically without any help from DHCP servers for address allocation or routers to forward or route messages. Many routing protocols have been proposed for the MANET, but these specify the most optimized or shortest path from a source to a destination, and they assume that nodes are pre-configured before communication. To make up for this, address allocation algorithms, such as MANETConf [1] and prophet address allocation algorithm [2], have been proposed. Especially, MANETConf proposes address allocation algorithm with duplication address check. In this paper, we present a dynamic node configuration protocol based on 2-tierd hierarchical network architecture for mobile ad-hoc network, modified from [1]. Especially, it reduces the number of broadcast message exchange between nodes when a new node somes into a network, which lessens network overhead, remarkably. This protocol is based on two-tired structure, and it ensures address allocation with simple duplication address defection mechanism.

• Bulletin of the Korean Space Science Society
• /
• 2009.10a
• /
• pp.26.2-26.2
• /
• 2009

The Solar and Space Weather Research Group (SOS) in Korea Astronomy and Space Science Institute (KASI) is constructing the Space Weather Prediction Center since 2007. As a part of the project, we are developing automatic real-time system of the global 3-D magnetohydrodynamics (MHD) simulation. The MHD simulation model of earth's magnetosphere is designed as modified leap-frog scheme by T. Ogino, and it was parallelized by using message passing interface (MPI). Our work focuses on the automatic processing about simulation of 3-D MHD model and visualization of the simulation results. We used PC cluster to compute, and virtual reality modeling language (VRML) file format to visualize the MHD simulation. The system can show the variation of earth's magnetosphere by the solar wind in quasi real time. For data assimilation we used four parameters from ACE data; density, pressure, velocity of solar wind, and z component of interplanetary magnetic field (IMF). In this paper, we performed some initial tests and made a animation. The automatic real-time system will be valuable tool to understand the configuration of the solar-terrestrial environment for space weather research.

• Journal of KIISE:Computing Practices and Letters
• /
• v.15 no.4
• /
• pp.255-259
• /
• 2009

In this paper, we present AGE(Automatic Grid Environments), which is a middleware system in which Grid resources can automatically participate in a Grid environment. While other existing systems need the configuration of each Grid node to deploy a Grid environment, AGE offers automatic installation and execution of necessary middleware for participating in a Grid environment. And Grid applications in AGE do not need to be pre-installed and pre-configured. When an application is to be executed in participating Grid nodes, this system can download, install, and execute the application automatically. Therefore, AGE provides users with convenience such as deploying a Grid environment, executing the application, and releasing nodes or resources from the Grid environment automatically.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.18 no.11
• /
• pp.24-34
• /
• 2019

An automotive automatic transmission is a popular power-transmitting device in passenger vehicles, as it provides various speed ratios for diverse driving conditions with easy manipulation and smooth gear shifting. The transmission is mainly composed of input and output shafts, planetary gear sets, brakes/clutches, and housing, and it yields multiple forward gears and one reverse gear by actuating the shifting devices of the brakes and clutches. In developing a new transmission, kinematic configurations of a transmission, which presents a brief structure and actuation schemes for speed ratios, need to be checked to determine if the structure can be assembled in a layout. It is impossible for a transmission concept having any interference in connecting main components to be developed further in the design process, since connection interference leads to failure of a layout design in the 2-D plane. In this research, an analysis of the assemblability of a front-wheel drive automatic transmission is carried out on an example concept design by applying the vertex addition algorithm based on graph theory.

• Journal of Sasang Constitutional Medicine
• /
• v.20 no.1
• /
• pp.34-41
• /
• 2008

1. Objectives We had been developing a 3D Automatic Face Recognition Apparatus (3D-AFRA) in order to evaluate the external appearances with more objectivity. This apparatus provides a 3D image and numerical data on facial configuration, and this study aims to evaluate the accuracy of 3D-AFRA recognition. 2. Methods Each scanned pictures were pointed with the 3D Automatic Face Recognition Apparatus(3D-AFRA). And the results were compared with data pointed pictures with manual. And we analysed the difference between Automatic and manual by paired -test. 3. Results and conclusions In frontal face, the P-value was more than 0.05. In conclusion, We assessed that accuracy of recognition of 3D Automatic Face Recognition Apparatus(3D-AFRA) is considerably good. But we should develop methods of measurement for lateral face and indistinct points of frontal face.

• Proceedings of the KSME Conference
• /
• 2004.11a
• /
• pp.655-660
• /
• 2004

The pipes in the outdoor unit of an air conditioner are designed to reduce the vibration effect of the compressor. Three-dimensional structure of the pipe could provide various design choices and the resultant vibration characteristics of the outdoor units. A design program has been developed for an eligible parametric study of pipe design and automatic vibration analysis using commercial software, I-DEAS, and its macro. Optimal design of pipe configuration has been performed using the commercial software, iSIGHT. The optimized design shows 70 percents improvement in the vibration characteristics of the outdoor unit of an air conditioner.

• Journal of Information Technology Services
• /
• v.10 no.3
• /
• pp.189-201
• /
• 2011

Feature models are widely used to model commonalities and variabilities among products during software product line development. Feature configurations are generated by selecting the features to be included in individual products. Automated tools to identify errors or inconsistencies in the feature models and configurations are essential to successful software product line engineering. This paper proposes a verification technique and tool based on semantic web technologies such as OWL, SWRL and Protege API. This approach checks the feature model and configuration based on predefined rules and provides information on existence of errors as well as the kinds of those errors. This approach is extensible due to ease of rule modification and may be easily applied to other environments because semantic web technologies can be easily integrated with other programming environments. This paper demonstrates how various semantic web-related technologies can support automatic verification of one kind of software development artifact, the feature model.

• Proceedings of the KIEE Conference
• /
• 2005.10b
• /
• pp.587-590
• /
• 2005

Reactive plans for a box-pushing task of a mobile robot are automatically built up, where sequential action plans are found in a configuration space by A* algorithm for various initial configurations. Then, conjunction of conditions to associate with a same behavior are found by a back tracking algorithm. And corresponding reactive plans are generated. Finally, a clustering technique is applied to identify which reactive plan should be applied for a given perceptual condition. Several simulation results are shown to justify our proposed approach.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.4 no.1
• /
• pp.25-31
• /
• 2008

In this paper, we propose a new method that separates background and foreground from stereo images. This method can be improved automatic target tracking system by using disparity map of the stereo vision system and background-separating mask, which can be obtained camera configuration parameters. We use disparity map and camera configuration parameters to separate object from background. Disparity map is made with block matching algorithm from stereo images. A morphology filter is used to compensate disparity error that can be caused by occlusion area. We could obtain a separated object from background when the proposed method was applied to real stereo cameras system.