• Journal of the Korea Society of Computer and Information
• /
• v.23 no.3
• /
• pp.9-16
• /
• 2018

In this paper, I purpose one of the development methods for portable Automatic field Test Equipment(ATE) with VME form factor. Almost portable ATE have not used to standards form factor and they are connected by mechanical non-rigid general connectors and wire harnesses among the components. Furthermore, it is hard to reuse developed board. So, it decreases to reusability of developed board and it is hard to maintenance of ATE. Even those things have weakness for vibration and drop test especially in portable ATE. The XK9A1 ATE using VME form factor has environmental reliability through vibration, drop, temperature test. It consists of 5 developed board called the control board, the wire & wireless communication board, the power supply board, the load board and the mother board. It is connected by two wire harnesses between mother board and extern circular connectors. The control board send the data and address to other board though each 16-bit data and 20-bit address line. You can develop the function board what you want to using those data & address line when it comes to needing other function board.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.25 no.1
• /
• pp.108-114
• /
• 2021

AVTE(Air Vehicle Test Equipment) is a device to check status of on-board aircraft equipment before and after flight for performing successful UAV(Unmanned Aerial Vehicle) missions. This paper describes software design and test sequence of the AVTE for enabling easy-manual check by the operator and convenient automatic check of on-board electric equipment respectively. The proposed AVTE inspects BIT(Built-In Test) results of on-board LRUs(Line Replacement Units) including avionics and sensor sub-system devices. Also, it monitors all the LRU status and check the normality of aircraft equipment by means of setting specific values of the LRUs and confirming the expected test results. The AVTE prints the test results as a form of report to easily check the normal conditions of the aircraft equipment and operates automatically without operator interaction, thus being thought to effectively reduce workload of the operator.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2010.06a
• /
• pp.360-360
• /
• 2010

반도체 산업은 지속적인 design rule 감소로 인해 직접도 및 Pin Count가 점점 증가함에 따라 보증해야할 회로의 수와 기능이 더불어 증가하고 있으며, 그 중 Test Cost 감소 방법 확보가 시급하게 되었다. 이에 따라 Test Cost 감소와 직결된 Test Time 감소 방법이 다양하게 제시되고 연구되고 있다. 본 논문은 Test Time의 한 부분인 반도체 검사 장비 (Automatic Test Equipment)의 효율적인 제어 방법을 제공함으로써, 관련 분야의 이해를 돕고자 한다.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2001.04a
• /
• pp.309-314
• /
• 2001

The balance of high speed spindle system with high precision rotation like grinding machine is very important. Traditionally, we use trial and error method to balance the spindle. It takes much time. So we are developing the automatic balancing equipment being used in the grinding machine. The balancing head we develop is wireless. It will be used high-speed grinding machine. We use influence coefficient method to control the automatic balancer. Experiments are based on automatic and manual balancing. We perform test of the vibration filter. It helps to remove noise. The filter and experiments with automatic balancing controller show that automatic balancing control can be successfully achieved with the quick response and good stability characteristics.

• 제어로봇시스템학회:학술대회논문집
• /
• 1993.10a
• /
• pp.244-249
• /
• 1993

This paper proposes a method of automatic function test for parts mounted Printed Circuit Board. For this purpose, we designed a Data Acquisition Equipment, PC interface card and inspection software. The experiment was done for the coffee vending machine and its result was good.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.9
• /
• pp.144-150
• /
• 2020

This study examined the current status of ATE in the development stage of the domestic guided weapons field, including the re-establishment of automatic test equipment (ATE), and attempted to develop methods to verify the validity of ATE in the defense sector. This study includes methods for confirming the repeatability and reproducibility of newly manufactured or replaced ATE. An error injection test is required for validation in the development phase. And pre-inspection steps are required for validation. When developing ATE, the use of an international standard testing script language ensures efficient validation and SW reliability. This ensures interoperability between the main and test equipment, and the tester can secure a test system platform that supports standardized testing methods, which is considered to be effective in validating specific ATE for each weapon system.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.13 no.3
• /
• pp.259-262
• /
• 2013

Multi-site testing is considered as a solution to reduce test costs. This paper presents a new channel sharing architecture that enables I/O pins to share automatic test equipment (ATE) channels using simple circuitry such as tri-state buffers, AND gates, and multiple-input signature registers (MISR). The main advantage of the proposed architecture is that it is implemented on probe cards and does not require any additional circuitry on a target device under test (DUT). In addition, the proposed architecture can perform DC parametric testing of the DUT such as leakage testing, even if the different DUTs share the same ATE channels. The simulation results show that the proposed architecture is very efficient and is applicable to both wafer testing and package testing.

• Journal of the Korea Convergence Society
• /
• v.9 no.10
• /
• pp.257-263
• /
• 2018

The purpose of this study is to develop an automatic inspection system for a part of the differential drive gear into the transmission. This technology will make using the microvision automatic test equipment and automatic test equipment microlaser. This is that the operator intends to make the defect rate 0 in the inspection stage of the product which has been carelessly processed. The equipment developed in this research project will be applied to many areas. Packaging companies, nut bolt processing company, precisely supplier for printing on top of the semiconductor, SMT, etc. The company wants to sell the vision inspection equipment for various applications. If the defective rate of 0 is achieved through this research project, it is also possible to secure a stable supply from the parent company, and to lay the foundations for exporting based on product reliability. When the automatic inspection system is applied to domestic automobile parts processing companies, the reliability of automobiles in Korea will be greatly increased.

• Proceedings of the KSR Conference
• /
• 2000.11a
• /
• pp.578-585
• /
• 2000

ATC/ATO/TWC System is the used for the train operation instead of drivels. It is interfaced with train, train equipment, wayside facilities. In this paper described configuration signaling system, construction of signaling system software and structure of system safety. This paper describes the method of performing automatic driving by ATC/ATO/TWC. Also, reported test result for mainline static test and mainline running test.

• Journal of Advanced Navigation Technology
• /
• v.21 no.5
• /
• pp.508-513
• /
• 2017

Maintainability in engineering terms means ease of maintenance / management of the product. Aircraft automatic test equipment (ATE) is heavily influenced by the design changes of the unit under test(UUT) since the test procedure is developed according to the function / performance characteristics of the UUT. Moreover, if the integrated ATE is an environment that checks more than one UUT, it is not easy to maintain the ATE for the UUT design changes. Developers should be able to flexibly cope with the change of development staff by selecting an easy and clear development method to improve the maintainability of ATE. It is also necessary to limit the area affected by the UUT design change to a specific range to minimize the area to be modified. In this paper, we propose ATE development method which focuses on maintenance improvement based on the aircraft ATE development process.