• Journal of the Korea Institute of Building Construction
• /
• v.15 no.3
• /
• pp.339-349
• /
• 2015

A large-scale research project to develop a robot-based automated building construction system for steel structures was successfully conducted in South Korea. This paper discusses the results of the real-scale test and the key lessons gained from the testing process. The system was assessed in terms of system productivity, construction cost, quality control, and safety improvements. While the productivity of the automated system showed an improvement of about 9.5%, the construction cost was about six times higher than that of the conventional method. The field test also indicated that the automated system requires more on-site quality control measures. However, because the system can eliminate the causes of various safety accidents, safety levels might be expected to be improved significantly. It is expected that this paper will provide knowledge and insight for developing new systems, and the results of the real-scale test might be useful for other researchers and similar research projects in the future.

• KIPS Transactions on Software and Data Engineering
• /
• v.5 no.4
• /
• pp.165-170
• /
• 2016

Using the intent of the Android application, an application can execute other application's components. However, if interaction between these components are not processed normally, such problems as incorrect component execution and unhandled system broadcast may be occurred. In this paper, to generate test scenarios for inter application interaction, a testing approach is proposed using a merged intent list and a single merged diagram. The proposed method can effectively be carried out to check the abnormal interaction among the applications which was not considered in existing testing approaches.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.29 no.2
• /
• pp.145-152
• /
• 2009

Currently almost all in-service-inspection techniques, applied in domestic nuclear power plants, are partial to field inspection technique. These kinds of techniques are related to managing nuclear power plants by the operation of foreign-produced inspection devices. There have been so many needsfor development of native in-service-inspection device because there is no native diagnosis device for nuclear power plant inspection yet in Korea. In this research, we developed several core techniques to make an automated ultrasonic pipe inspection system for nuclear power plants. A high performance multi-channel ultrasonic pulser/receiver module, an A/D converter module and a digital main CPU module were developed and the performance of the developed modules was verified. The S/N ratio, noise level and signal acquisition performance of the developed modules showed proper level as we designed in the beginning.

• The KIPS Transactions:PartD
• /
• v.14D no.5
• /
• pp.517-530
• /
• 2007

Recently web applications have growl rapidly and have become more and more complex. As web applications become more complex, there is a growing concern about their quality. But very little attentions are paid to web applications testing and there are scarce of the practical research efforts and tools. Thus, in this paper, we suggest the automated testing methods for web applications. For this, the methods generate an analysis model by analyzing the HTML codes and the source codes. Then test targets are identified and test cases are extracted from the analysis model. In addition, test drivers and test data are generated automatically, and then they are depleted on the web server to establish a testing environment. Through this process we can automate the testing processes for web applications, besides the automated methods makes our approach more effective than the existing research efforts.

• Geotechnical Engineering
• /
• v.14 no.3
• /
• pp.95-108
• /
• 1998

Downhole testing and seismic CPT (SCPT) have been widely used to evaluate stiffness profiles of the subgrade. Advantages of downhole testing and SCPT such as low cost, easy operation and a simple seismic source have got these testings more frequently adopted in site investigation. For the automated analysis of downhole testing and SCPT, the concept of interval measurements has been practiced. In this paper. a new inversion procedure to deal tilth the interval measurements for the automated downhole testing and SCPT (including a newlydeveloped continuous SCPT) is proposed. The forward modeling in the new inversion procedure incorporates ray path theory based on Snell's law. The formulation for the inversion analysis is derived from the maximum likelihood approach, which estimates the maximum likelihood of obtaining a particular travel time from a source to a receiver. Verification of the new inversion procedure was performed with numerical simulations of SCPT using synthesized profiles. The results of the inversion analyses performed for the synthetic data show that the new inversion analysis is a valid procedure which enhances Va profiles determined by downhole testing and SCPT.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.17 no.2
• /
• pp.51-59
• /
• 2007

Software testing is the process of analyzing a software item to detect the differences between existing and required conditions and to evaluate the features of the software item. A traditional testing focuses on proper functionality, not security testing. Fuzzing is a one of many software testing techniques and security testing. Fuzzing methodology has advantage that low-cost, efficiency and so on. But fuzzing has defects such as intervening experts. Also, if there is no specification, fuzzing is impossible. ROAD Tool is automated testing tool for RPC(Remote Procedure Call) based protocol and software without specification. Existing tools are semi-automated. Therefore we must modify these tools. In this paper, we design and implement ROAD tool. Also we verify utility in testing results.

• Proceedings of the Korean Information Science Society Conference
• /
• 2008.06b
• /
• pp.7-12
• /
• 2008

Reusing software components without proper analysis is very risky because software components can be used differently from the way that they were developed. This paper describes a new testing approach for reusing software components. With this new approach, it is possible to automatically decide if software components can be reused without retesting. In addition, when retesting is required for reusing software, test cases are generated more efficiently using the previous testing history.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.8 no.12
• /
• pp.119-125
• /
• 1985

It is very important to assure the software quality. The static and dynamic testing are to be performed on the program to find some error in it, and it's purposes are to assure the software quality with cost-effectiveness. For it we use the automated tool. In this paper, it suggest the design of the software tool for COBOL static testing.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.32 no.6
• /
• pp.669-677
• /
• 2012

This study presents a method to monitor cable force using wireless sensor nodes and piezoelectric sensors. The following approaches are carried out to achieve the objective. Firstly, the principle of piezoelectric materials (e.g., PZT) as strain sensors is reviewed. A cable force estimation method using dynamic features of cables measured by piezoelectric materials is presented. Secondly, the design of an automated cable force monitoring system using the data acquisition sensor-node Imote2/SHM-DAQ is described. The sensor node is originally developed by University of Illinois at Urbana-Champaign and is adopted in this study to monitor strain-induced voltage from PZT sensors. The advantages of the system are cheap, and eligible for wireless communication and automated operation. Finally, the feasibility of the proposed monitoring system is evaluated on a lab-scaled cable.

• Journal of KIISE:Computing Practices and Letters
• /
• v.16 no.5
• /
• pp.581-585
• /
• 2010

As developers and testers today we all suffer from increasing project complexity, the risks of late defect discovery, repetitive manual processes, and the risk of release delays. In this paper, we introduce an effective framework for automated testing to help solve such problems. Those that are new to testing do not need to delve into complex automation tools or test scripts. This framework helps automate the distribution, execution and results analysis of test cases. It also aids communication among the various stakeholders, using tables for representing tests and for reporting the results of automatically checking those tests. This paper describes the practices and benefits of using the proposed framework.