• Korean Journal of Materials Research
• /
• v.18 no.1
• /
• pp.45-50
• /
• 2008

Microstructural evolution and the intermetallic compound (IMC) growth kinetics in an Au stud bump were studied via isothermal aging at 120, 150, and $180^{\circ}C$ for 300hrs. The $AlAu_4$ phase was observed in an Al pad/Au stud interface, and its thickness was kept constant during the aging treatment. AuSn, $AuSn_2,\;and\;AuSn_4$ phases formed at interface between the Au stud and Sn. $AuSn_2,\;AuSn_2/AuSn_4$, and AuSn phases dominantly grew as the aging time increased at $120^{\circ}C,\;150^{\circ}C,\;and\;180^{\circ}C$, respectively, while $(Au,Cu)_6Sn_5/Cu_3Sn$ phases formed at Sn/Cu interface with a negligible growth rate. Kirkendall voids formed at $AlAu_4/Au$, Au/Au-Sn IMC, and $Cu_3Sn/Cu$ interfaces and propagated continuously as the time increased. The apparent activation energy for the overall growth of the Au-Sn IMC was estimated to be 1.04 eV.

• Proceedings of the KAIS Fall Conference
• /
• 2011.05b
• /
• pp.970-973
• /
• 2011

유색 금 합금 중의 하나인 퍼플골드(purple gold)는 특유의 적자색(보라색)이 나는 78wt%Au-22wt%Al의 조성으로 이루어진 금 합금으로 많은 각광을 받고 있다. 본 연구에서는 78wt%Au-22wt%Al(이후 Au1)인 기준 조건보다 Al의 상대조성이 커짐에 따라 보라색과 기계적 물성의 변화를 확인하기 위해 76wt%Au-24wt%Al(이후Au2), 74wt%Au-26wt%Al(이후 Au3), 72wt%Au-28wt%Al(이후 Au4)으로 Al 조성을 22~26%Al까지 변화시키고 이때의 비커스 경도, 광학현미경, EDS, UV-VIS-NIR 색차분석 실험을 실시하였다. 비커스경도 측정결과 Al의 함유량이 증가함에 따라 경도값은 감소하는 경향성을 보였으며, 26wt%Al 이상의 조성에서 Au1 조성에 상응하는 경도 값을 유지할 수 있음을 확인하였다. 광학현미경을 이용한 미세구조 분석결과 Al의 함유량이 증가함에 따라 적자색을 띄는 결정립 $AuAl_2$의 분포는 감소하며, 결정립계에 석출하는 Al-rich 상의 분포와 크기는 증가하는 경향을 확인하였다. EDS를 이용한 성분분석 결과 실제 목표했던 조성과 분석오차를 고려하면 잘 일치함을 확인하였다. UV-VIS-NIR를 이용한 색차 분석결과 Au3 조성까지도 보라색을 유지할 수 있음을 확인하였다. 따라서 비커스경도와 색을 고려하면 기존 19K인 Au1보다 18K의 Au2 조성에서도 퍼플골드 구현이 가능하였다. 이후 Au2 조성으로 블랙홀과 아라크네를 모티브로 하여 실제 주얼리 제품을 성공적으로 제조하였다.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.25 no.11
• /
• pp.922-925
• /
• 2012

Single crystalline Au nanowires were successfully synthesized in a tube-type furnace. The Au nanowires were grown by vapor phase synthesis technique using solid-liquid-solid (SLS) mechanism on substrates of corning glass and Si wafer. Prior to Au nanowire synthesis, Au thin film served as both catalyst and source for Au nanowire was prepared by sputtering process. Average length of the grown Au nanowires was approximately 1 ${\mu}m$ on both the corning glass and Si wafer substrates, while the diameter and the density of which were dependent on the thickness of the Au thin film. To induce a super-saturated states for the Au particle catalyst and Au molecules during the Au nanowire synthesis, thickness of the Au catalyst thin film was fixed to 10 nm or 20 nm. Additionally, synthesis of the Au nanowires was carried out without introducing carrier gas in the tube furnace, and synthesis temperature was varied to investigate the temperature effect on the resulting Au nanowire characteristics.

• 한국신재생에너지학회:학술대회논문집
• /
• 2010.06a
• /
• pp.143.1-143.1
• /
• 2010

고분자 전해질막 연료전지(Polymer Electrolyte Membrane Fuel Cell; PEMFC)는 수소를 이용하여 전기를 발생시키는 친환경적이고 이상적인 발전장치로 고효율과 높은 전류밀도를 가지며 그 응용분야가 다양하다. 저온에서 작동하는 PEM fuel cell은 전극에서 효과적인 산화환원반응을 위해 그 촉매로 활성이 우수한 Pt(Platinum)을 사용하고 있으나, Pt의 높은 가격은 연료전지의 상용화에 걸림돌이 되고 있다. 본 연구에서는 연료전지의 Pt/C 촉매 층에서 Pt의 분산성을 높여 Pt의 담지량을 줄이고 작동 중 발생하는 Pt의 응집 현상을 방지하여 Pt의 수명을 연장시킬 목적으로, Au(gold) 나노입자를 첨가한 Pt-Au/C 복합나노촉매를 제조하였다. 본 발표에서는 합성된 Pt-Au/C 복합촉매 중 Au 첨가량이 Pt 촉매의 활성에 미치는 영향을 조사하기 위하여, 복합촉매 중에 금속(Pt+Au)의 총 함량이 30 wt.%와 40 wt.% 인 Pt-Au/C 촉매에 대하여 각각 Au 첨가량을 변화시켜, cyclic voltammetry 법에 의해 Au 첨가 효과를 조사한 결과에 대하여 보고하고자 한다. Au 나노입자를 제조하기 위한 출발 물질로는 $HAuCl_4{\cdot}4H_2O$를 이용하였고 trisodium citrate와 $NaBH_4$를 환원제로 하여, 입경이 5~8 nm 인 Au 콜로이드를 제조하였다. Pt-Au/C 복합나노촉매를 제조하기 위하여 먼저 Au/C 복합분체가 제조되었다. 0.03g의 carbon이 첨가된 carbon 현탁액에 합성된 Au 콜로이드 수용액을 첨가한 후 24시간 동안 교반하여 Au/C 복합분체를 제조하였다. 이 Au/C 복합분체에 $H_2PtCl_6{\cdot}6H_2O$ 수용액을 현탁하고 methanol 을 환원제로 사용해 Pt를 환원 석출시켜 Pt-Au/C 복합촉매를 제조하였다. Pt-Au/C 복합 나노촉매에서 Pt와 Au를 다양한 비율(3:1, 2.5:1.5, 2:2)로 합성하였으며 Pt-Au/C 복합촉매 중 금속(Pt+Au) 촉매의 총 함량은 30 wt.%와 40 wt.%로 각각 제조되었다. Au 나노입자 콜로이드의 분산성은 UV-visible spectrum의 흡광도에 의해 관찰되었고, Pt-Au/C 복합 나노촉매의 형상 및 분산성 분석은 transmission electron microscopy(TEM)에 의해 이루어졌다. 또한, 촉매의 전기화학적 특성평가는 cyclic voltammetry(CV)에 의해 조사되었다.

• The Korean Journal of Zoology
• /
• v.12 no.3
• /
• pp.85-93
• /
• 1969

The frequencies of chromosomal aberrations, unmerical variations at various time intervals and DNA synthetic patterns after the treatment with steroids in synchronized human kidney cells treated with 5-AU were investigated in the present experiment. 1. In 5-AU treated group, the frequency of chromosomal aberrations per cell was 0.131, 3 times of control group. In 5-AU + progesterone and 5-AU + testosterone groups, the frequency of chromosomal aberrations per cell was 0.340 and 0.452 respectively. 2. In 5-AU treated group, the frequency of cells with abnormal chromosome number was 0.8%, which was distributed throughout the time regardless of time interval. In 5-AU + progesterone and 5-AU + testosterone groups, the frequencies of cells with abnormal chromosome number were 2.2% and 4.3% respectively and they increased with the time. In 5-AU + progesterone group, the frequency of chromosomal aberrations exhiited the peaks at 12 and 18 hour stage after the treatment with steroids and, in 5-AU + testosterone group, it decreased with the time and in 5-AU treated group no significant difference was observed 3. The increase of labeled metaphases and labelling intensities in 5-AU treated cells are the result of the accumulation of cells at S stage by 5-AU. The decrease of labeled metaphases, labelling intensities and the delay of DNA synthetic time were observed in steroid groups. DNA synthetic pattern of sex chromosomes differs according to the step of cell cycle and DNA synthetic time is irregular because of double treatments with 5-AU and steroids.

• Journal of the Korean Vacuum Society
• /
• v.1 no.1
• /
• pp.100-105
• /
• 1992

Auger electron spectroscopy (AES) and X-ray photoelectron spectroscopy (XPS) analyses have been performed on double-structured Au/V and Au/Ti thin films after heat treatment at 500$^{\circ}$C in air. V- and Tiunderlays sandwiched between gold thin films and SiOz substrates form oxides on the free surface of gold films during the heat treatment. The chemical compositions of the oxides were identified as V205 and TiOz in Au/V and Au/Ti thin films, respectively.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2005.07a
• /
• pp.107-108
• /
• 2005

Au and $Au/SiO_2$ nanoparticles(NPs) were synthesized by the colloidal method. The formation of Au and $Au/SiO_2$ NPs was confirmed using high resolution transmission electron microscopy (HRTEM). Synthesized solutions were deposited on Si wafer. The electrical properties of structures were measured using a semiconductor analyzer and a LCR meter. Capacitance versus voltage hysterisis curves showed the charge storage effect by Au and $Au/SiO_2$ NPs.

• Journal of Electrochemical Science and Technology
• /
• v.10 no.2
• /
• pp.206-213
• /
• 2019

The development of simple methods for As detection has received great attention because As is a toxic chemical element causing environmental and health-related issues. In this work, the effect of nanostructures of Au electrodes on their electroanalytical performance during As detection was investigated. Different Au nanostructures with various surface morphologies such as nanoplate Au, nanospike Au, and dendritic Au structures were prepared, and their electrochemical behaviors toward square-wave anodic stripping voltammetric As detection were examined. The difference in intrinsic efficiency for As detection between nanostructured and flat Au electrodes was explained based on the crystallographic orientations of Au surfaces, as examined by the underpotential deposition of Pb. The most efficient As detection performance was obtained with nanoplate Au electrodes, and the effects of the pre-deposition time and interference on As detection of the nanoplate Au electrodes were also investigated.

• Journal of the Korean Ceramic Society
• /
• v.40 no.9
• /
• pp.902-908
• /
• 2003

Au/TiO$_2$ core-shell structure nanoparticles were synthesised by sol-gel process, and the morphology and crystallinity of TiO$_2$ shell were investigated by TEM and UV-Vis. absorption spectrometer. Au/TiO$_2$ core-shell structure nanoparticles could be prepared by the hydrolysis of TOAA (Titanium Oxide Acethylacetonate) in Au colloid ethanol solution with $H_2O$. The thickness of TiO$_2$ shell on the surface of Au particles was about 1 nm. To investigate the crystallinity of TiO$_2$ shell, UV light with 254 nm and radioactive lay of $^{60}$ CO were irradiated on the TiO$_2$ coated Au colloid ethanol solution. The surface plasmon phenomenon of Au nanoparticles appeared only when the radioactive lay was irradiated on the TiO$_2$ coated Au colloid ethanol solution. From these results, it was found that the TiO$_2$ shell was amorphous and the MUA (Mercaptoundecanoic Acid) layer on the Au particle for its dispersion didn't act as an obstacle to disturb the movement of electron onto the surface of Au particle.

• Korean Journal of Materials Research
• /
• v.19 no.10
• /
• pp.527-532
• /
• 2009

The electrochromic properties of Au nanoparticles (NPs) incorporating poly (3, 4-ethylenedioxythiphene) (PEDOT) film were investigated. Trisodium citrate was used for stabilizing Au NPs to control the size. The capping molecules of the Au nanoparticles were exchanged from citrate to 2-mercaptoethanol (2-ME). Water was removed by centrifuge and Au NPs were redispersed in methanol (MeOH). Finally, we obtained ca. 11.7 nm diameter of Au NPs. The effects of 0.15 at% of Au NPs incorporation on the optical, electrical, and eletrochromic properties of PEDOT films were investigated. The electrical property and switching speed of Au/PEDOT film was slightly improved over that of PEDOT film because Au NPs play a hopping site role and affect packing density of the PEDOT chain. Through the ultra violet-visible spectra of PEDOT and Au/PEDOT films at -0.7 V (vs Ag/AgCl), blue shift of maximum absorption peak was observed from PEDOT (585.4 nm) to Au/PEDOT (572.2 nm) due to a shortening of conjugated length of PEDOT. The Au NPs interfered with the degree of conjugation and the maximum absorption peak was shifted to shorter wavelength.