• Journal of the Korean Ceramic Society
• /
• v.41 no.5
• /
• pp.375-380
• /
• 2004

Pb(Ni$\_$1/3/Nb$\_$2/3/)O$_3$-PbZrO$_3$-PbTiO$_3$ thick films were screen-printed on platinized alumina substrates and fired at 800-1000$^{\circ}C$. Two kinds of powders with different particle size were prepared by attrition and ball milling methods. Effects of particle size of starting material on the microstructure and electrical properties of the thick films were investigated. Average particle size of attrition milled-powder (0.44 ${\mu}$m) was much smaller than that of ball milled-powder (2.87 ${\mu}$m). Average grain size of the thick film prepared from attrition-milled powder was smaller than that of the thick film prepared from ball-milled powder at the sintering temperature of 800$^{\circ}C$. However, the difference in average particle size became smaller with increasing the sintering temperature. Thick films prepared from attrition-milled powders showed more uniform and denser microstructures at all firing temperatures. Thick films prepared from attrition-milled powders had better electrical properties at the firing temperature above 900$^{\circ}C$ than thick films prepared from ball-milled powders. Dielectric constant, remanent polarization and coercive field of the thick film prepared from attrition-milled powders and fired at 900$^{\circ}C$ were 559, 16.3 ${\mu}$C/cm$^2$, and 51.3 kV/cm, respectively.

• Microbiology and Biotechnology Letters
• /
• v.21 no.5
• /
• pp.461-467
• /
• 1993

Transglycosylation reaction of cyclodextrin glucanotransferase (CGTase) was analyzed in the attrition coupled heterogeneous reaction system using raw starch as a donor` and mono-, di-saccharide, and glycoside as acceptors. For transglycosylation reaction of stevioside, the transglycosylation rate was similar and the transglycosylation yield was increased compare with conventional process using liquefied starch as the donor. Also the accumulation of maltooligosaccharides in reaction mixture was minimized.

• 한국초전도학회:학술대회논문집
• /
• 2009.07a
• /
• pp.51-51
• /
• 2009

• Journal of the military operations research society of Korea
• /
• v.12 no.2
• /
• pp.22-36
• /
• 1986

The study is to design optimal aircraft allocation model for sufficing the required level of damage, minimizing attrition cost when the aircrafts attack the enemy's fixed target. When friendly aircraft attacks enemy target, the aircraft will suffer the loss due to the enemy's anti-aircraft weapons and aircraft. For this study, it is required that the probability of target damage by the type of aircraft, level of target damage and attrition cost are computed for the application of this model.

• Korean Chemical Engineering Research
• /
• v.50 no.5
• /
• pp.894-899
• /
• 2012

In recent years, recycling process has come to be necessary for separating metals, glass fibers and polymer from WPCBs (waste printed circuit boards) due to an increasing amount of electronic device waste. In this study, dimethylformamide (DMF) and attrition mill reactor were used to separate the component such as metals, glass fiber and epoxy resin from WPCBs. Separation of glass fiber from WPCBs was carried out under stirring rates 300~600 revolution per minute (rpm) for 1~2 h as the various agitator. The recycled glass fibers (RGF) were analyzed by thermogravimetric analyzer (TGA) for degree of separation of epoxy resin in the WPCBs. The degree of separation of epoxy resin of WPCBs increased in attrition mill agitator as a mechanochemical process for recycling WPCBs. The RGF separated in the WPCBs was applied as a reinforcement in the RGF/unsaturated polyester composites to reuse as a reinforcement.

• Microbiology and Biotechnology Letters
• /
• v.17 no.4
• /
• pp.349-357
• /
• 1989

Uncooked starch can be effectively saccharified in an enzyme reaction system containing attrition-milling media. To develope the high efficiency bioattritor, an agitated bead type bioreactor was constructed, and its effectiveness was evaluated. The optimal operation condition of bioattritor was found to be 300 g glass bead/L, 200 rpm, standard type impeller for 220 g/L of uncooked corn starch. The torque under the various operational conditions were also measured. The interrelation-ship between energy consumption for agitation of attrition-milling media and enhanced extent of saccharification of uncooked starch was evaluated, Power consumption was measured to be around 1.53 watt/L under the optimal operation condition. The attrition coupled enzyme reaction system is identified to tie a very excellent energy saying process for saccharification of uncooked starch, and seems to have a bright prospect of industrial application.

• KSBB Journal
• /
• v.4 no.2
• /
• pp.87-93
• /
• 1989

To develop high dfficiency-low energy consumption attrition coupled bioreactor for enhanced enzymatic hyerolysis of insoluble biomass, a tumbling drum type bioreactor was installed, and its efficiency was evaluated. The effects of drum structure and poerational conditions were investigated. The optimal saccharification at 3L drum was obtained at 8 baffled drum, drum diameter to baffle height ratio of 1:0.05, 100rpm, and addition of 600g of 3mm glass bead per liter. The consumed power for rolling of drum and energy consumption for half digestion of cellulose were measured, and compared with enhanced rate and yield to predict the economic prospect of the process. The tumbling drum type bioreactor seems to have appropriated structure for industrial scale operation, and further investigation for scale-up need to be conducted.

• KSBB Journal
• /
• v.4 no.3
• /
• pp.215-220
• /
• 1989

To develop an attrition coupled enzyme reactor with high efficiency-low energy consumption for saccharification of insoluble biomass, a 5L horizontal paddle type bioreactor was constructed and its performance was evaluated. The optimal condition for saccharification of 50g $\alpha$ -cellulose/L was found to be 200rpm with 500g of 3mm glass bead. Especially, the horizontal paddle type bloreactor was very effective for saccharification of high concentration of insoluble cellulose, in which around 72% of $\alpha$ -cellulose was saccharified for 75g $\alpha$ -cellulose/L, and even up to 70% for 100g of $\alpha$ -cellulose/L after 24hours. Under the optimal condition, the power consumption was measured to be around 1.7watth/g. Horizontal paddle type bioreactor seems to have an appropriated structural feature for industrial scale operation and to be an effective and energy saving attrition coupled enzyme reactor.

• Survey Research
• /
• v.10 no.1
• /
• pp.73-89
• /
• 2009

Even though panel surveys are very useful in estimating the change between time points, they suffer from sample distortion as survey rounds proceed due to panel attrition and conditioning. This study is to report the statistical aspects of KBS-MBMR's five-rounds panel survey for the 2007 Presidential Election of Korea. Main findings are as follows. First, the attrition propensities were higher among women, among the young and the old aged, and among "None"/"Don't Know"/"Won't Say"(DK) respondents for the question asking preferred candidate. Second, there existed the conditioning effect that pushes the respondents to choose one candidate in hurry. Third. repeated measurements of the survey did not influence panel respondents on the choice of preferred candidate. if DK respondents are set. aside, and on the final voting intention of panel respondents.

• Journal of Sensor Science and Technology
• /
• v.17 no.6
• /
• pp.418-424
• /
• 2008

The PZT based piezoelectric thick films prepared by screen printing method have been mainly used as a functional material for MEMS applications due to their compatibility of MEMS process. However the screen printed thick films generally reveal poor electrical and mechanical properties because of their porous microstructure. To improve microstructure we mixed attrition milled powder with ball milled powder of 0.01Pb$(Mg_{1/2}W_{1/2})O_3$-0.41Pb$(Ni_{1/3}Nb_{2/3})O_3$-$0.35PbTiO_3$-$0.23PbZrO_3$+0.1 wt% ${Y_2}{O_3}$+1.5 wt% ZnO composition. By mixing 25 % of attrition milled powder and 75 % of ball milled powder, the broadest particle size distribution was obtained, leading to a dense thick film with crack-free microstructure and improved dielectric properties. The X-ray diffraction analysis revealed that the film was in wellcrystallized perovskite phase. The remanent polarization was increased from $13.7{\mu}C/cm^2$ to $23.3{\mu}C/cm^2$ at the addition of 25 % attrition milled powder.