• Journal of the Semiconductor & Display Technology
• /
• v.21 no.1
• /
• pp.85-90
• /
• 2022

In this paper, an asynchronous nonvolatile memory module using a self-diagnosis function was designed. For the system to work, a lot of data must be input/output, and memory that can be stored is required. The volatile memory is fast, but data is erased without power, and the nonvolatile memory is slow, but data can be stored semi-permanently without power. The non-volatile static random-access memory is designed to solve these memory problems. However, the non-volatile static random-access memory is weak external noise or electrical shock, data can be some error. To solve these data errors, self-diagnosis algorithms were applied to non-volatile static random-access memory using error correction code, cyclic redundancy check 32 and data check sum to increase the reliability and accuracy of data retention. In addition, the possibility of application to an asynchronous non-volatile storage system requiring reliability was suggested.

• Journal of the Semiconductor & Display Technology
• /
• v.19 no.3
• /
• pp.118-123
• /
• 2020

In this paper, the design method of asynchronous nonvolatile memory module that can efficiently process and store large amounts of data without loss when the power turned off is proposed and implemented. PSRAM, which takes advantage of DRAM and SRAM, was used for data processing, and NAND flash memory was used for data storage and backup. The problem of a lot of signal interference due to the characteristics of memory devices was solved through PCB design using high-density integration technology. In addition, a boost circuit using the super capacitor of 0.47F was designed to supply sufficient power to the system during the time to back up data when the power is off. As a result, an asynchronous nonvolatile memory module was designed and implemented that guarantees reliability and stability and can semi-permanently store data for about 10 years. The proposed method solved the problem of frequent data loss in industrial sites and presented the possibility of commercialization by providing convenience to users and managers.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.57 no.8
• /
• pp.1440-1446
• /
• 2008

In this paper, a novel TMR (Triple Modular Redundancy) memory structure is proposed using state feedback control of asynchronous sequential machines. The main ability of the proposed structure is to correct the fault of SEU (Single Event Upset) asynchronously without resorting to the global synchronous clock. A state-feedback controller is combined with the TMR realized as a closed-loop asynchronous machine and corrective behavior is operated whenever an unauthorized state transition is observed so as to recover the failed state of the asynchronous machine to the original one. As a case study, an asynchronous machine modelling of TMR and the detailed procedure of controller construction are presented. A simulation results using VHDL shows the validity of the proposed scheme.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.41 no.10
• /
• pp.105-113
• /
• 2004

This paper presents a design method for an asynchronous memory with a completion signal generation circuit meeting D-I model. The proposed design method is to generates a completion signal with dummy cell and a completion signal generation circuit to indicate completion of the required read or write operation to the processor. Dividing a memory exponentially to consider delay of a bit-line and a memory cell makes memory operates as a D-I model with minimum addition of redundant circuit. The proposed memory partitioning algorithm that divides entire memory into the several partitions with a exponentially increased size reduces the memory access delay by 40% compared with a conventional partitioning method to the same size.

• International Journal of Contents
• /
• v.5 no.2
• /
• pp.53-58
• /
• 2009

This paper presents a novel approach in the design of a CAM for an asynchronous cache. The architecture of cache mainly consists of four units: control logics, content addressable memory, completion signal logic units and instruction memory. The pseudo-DCVSL is useful to make a completion signal which is a reference for handshake control. The proposed CAM is a very simple extension of the basic circuitry that makes a completion signal based on DI model. The cache has 2.75KB CAM for 8KB instruction memory. We designed and simulated the proposed asynchronous cache including CAM. The results show that the cache hit ratio is up to 95% based on pseudo-LRU replacement policy.

• Journal of the Semiconductor & Display Technology
• /
• v.22 no.1
• /
• pp.43-48
• /
• 2023

This paper discusses the design of 32Mbyte asynchronous nonvolatile memory modules, which includes self-diagnosis and RTC (Real Time Clock) functions to enhance their data stability and reliability. Nonvolatile memory modules can maintain data even in a power-off state, thereby improving the stability and reliability of a system or device. However, due to the possibility of data error due to electrical or physical reasons, additional data loss prevention methods are required. To minimize data error in asynchronous nonvolatile memory modules, this paper proposes the use of voltage monitoring circuits, self-diagnosis, BBT (Bad Block Table), ECC (Error Correction Code), CRC (Cyclic Redundancy Check)32, and data check sum, data recording method using RTC. Prototypes have been produced to confirm correct operation and suggest the possibility of commercialization.

• The KIPS Transactions:PartA
• /
• v.8A no.4
• /
• pp.439-446
• /
• 2001

The main stream of parallel programming today is using synchronous algorithms, where processor synchronization for correct computation and workload balance are essential. Overall performance of the whole system is dependent upon the performance of the slowest processor, if workload is not well-balanced or heterogeneous clusters are used. Asynchronous iteration is a way to mitigate such problems, but most of the works done so far are for shared memory systems. In this paper, we suggest and implement a parallel large sparse linear system solver that improves performance on distributed memory systems like clusters by reducing processor idle times as much as possible by asynchronous iterations.

• Journal of the Semiconductor & Display Technology
• /
• v.19 no.3
• /
• pp.112-117
• /
• 2020

NAND flash memory is a non-volatile memory that retains stored data even without power supply. Internal memory used as a data storage device and solid-state drive (SSD) is used in portable devices such as smartphones and digital cameras. However, NAND flash memory carries the risk of electric shock, which can cause errors during read/write operations, so use error correction codes to ensure reliability. It efficiently recovers bad block information, which is a defect in NAND flash memory. BBT (Bad Block Table) is configured to manage data to increase stability, and as a result of experimenting with the error correction code algorithm, the bit error rate per page unit of 4Mbytes memory was on average 0ppm, and 100ppm without error correction code. Through the error correction code algorithm, data stability and reliability can be improved.

• Journal of Korea Game Society
• /
• v.14 no.6
• /
• pp.59-68
• /
• 2014

Memory bandwidth requirements of UHD (Ultra High Definition $4096{\times}2160$) game scenes have been much more increasing. This paper presents a lossless DPCM-GR based compression algorithm using CUDA for solving the memory bandwidth problem without sacrificing image quality, which is modified from DDPCM-GR [4] to support bit parallel pipelining. The memory bandwidth efficiency increases because of using the shared memory of CUDA. Various asynchronous transfer configurations which can overlap the kernel execution and data transfer between host and CUDA are implemented with the page-locked host memory. Experimental results show that the maximum 31.3 speedup is obtained according to CPU time. The maximum 30.3% decreases in the computation time among various configurations.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.16 no.4
• /
• pp.326-334
• /
• 1991

We propose an optical Asynchronous Transfer Mode(ATM) switching system using free-space optics and an output buffer memory. The distributor system in the switching fabric was analyzed using the Huygens-Fresnel principle and lens transformation. For monochromatic illumination, a pattern similar to the Fourier transform of the input distribution was observed across the output plane. A spatially broadened intensity distribution across the the output plane can be expected when the system is illminated with a partially coherent, quasimonochromatic beam. Spatially coherent pulses as short as 100fs can propagate through the distributor without severe spatial broadening.