• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.8
• /
• pp.37-43
• /
• 2018

A developer solves problems with isolating failures if faults are detected when inspecting missiles using the missile assembly test set (MATS) and then resumes the testing. In order to identify faults, it is necessary to analyze the data coming from the equipment, but the information received may not be sufficient, depending on the inspection environment. In this case, the developer repeats the test until the problem is reproduced or checks the performance of each piece of equipment that is related to the fault. When this task is added, schedule management becomes problematic, and development costs rise. To solve this problem, we need to design a MATS in a systematic way to increase fault coverage while satisfying the required reliability. By designing the necessary processes for each procedure, it is possible to reduce the fault identification time when a fault is detected during operations. But it is not possible to guarantee 100% fault coverage, so we provide another method by comparing costs and effects. This paper describes a development method to enhance the reliability of the missile assembly test set; it describes the expected effects when it is adapted, and describes the limitations of this method.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.22 no.1
• /
• pp.190-198
• /
• 2018

In recent years, non-welded building hardware has been installed by bolt assembly is used. The non-welded building hardware method can reduce accidents caused by welding, and can be constructed by bolt assembly, which can reduce labor costs and shorten the construction period. However, there is a need for a method to compensate for the occurrence of buckling at the time of construction. The purpose of this study is to evaluate the behavior of joints between steel pipe and fastener and to evaluate the behavior of joints of non-welded and welded hardware frame. As a result, it was found that the foundation steel structure without welded joints was deformed to a rotation angle of member much larger than the allowable interlayer displacement angle 0.01 to 0.02 required according to the seismic load rating in the seismic load resistance system.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.22 no.4
• /
• pp.1-9
• /
• 2018

The development of new technology and process in industrial Plant which builds integrated structures, facilities and systems. Has become a key element for strengthening its competitiveness. Although domestic industrial Plant has demonstrated excellence in technology with a persistent increase in order quantity and orders received, the technology gap between countries has narrowed due to global construction trend. Therefore, it is necessary to develop new technology that could help overcome constraints and limitations of the current one to follow the trend in the age of unlimited competition. This study has focused on assembly technology of Pipe-rack joint connection in an effort to strengthen technological competitiveness in industrial Plant. Through an analysis of earlier studies on Pipe-rack and a coMParative analysis of strengths and weaknesses of current assembly technology of it, a new design plan has been made to improve it efficiently. In doing this, standards for design factors of both structural and performance features have been drawn, and value of stress, strain, moment and rotation has been calculated using finite element analysis. As a result, installation technology of modular type Pipe-rack, which has not been developed in Korea and is differentiated from the current one, has been developed. It is considered that the technology reduces work time and saves cost due to simplified joint connection of steel structure, unlike the current one. Moreover, since it is installed without a welding process in the field, industrial accidents would be reduced, which is likely to have economic competitiveness and satisfy.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.28 no.4
• /
• pp.364-371
• /
• 2008

Ultrasonic waveguide sensor has been developed for under-sodium viewing of reactor internal structures of a sodium-cooled fast reactor (SFR). The structure design concept of a waveguide sensor assembly was suggested and evaluated for the application in SFR. A 10 m long ultrasonic waveguide sensor assembly has been manufactured and the experimental feasibility tests were carried out. The 10 m long distance propagation performance of zero-order antisymmetric $A_0$ Lamb wave has been verified. The feasibility of ultrasonic waveguide sensor has been demonstrated by the C-scanning resolution performance test.

• Journal of Advanced Navigation Technology
• /
• v.23 no.5
• /
• pp.339-344
• /
• 2019

In order to prepare for the rise of data security threats caused by the information and communication technology, technology that can guarantee the stability of the data stored in the missile test set is important. For this purpose, encryption should be performed when data is stored so that it cannot be restored even if data is leaked, and integrity should be ensured even after decrypting the data. In this paper, we apply AES algorithm, which is a symmetric key cryptography system, to the missile test set, and Encrypt and decrypt according to the amount of data for each bit of each AES algorithm. We implemented the AES Rijndael algorithm in the existing inspection system to analyze the effect of encryption and apply the proposed encryption algorithm to the existing system. confirmation of suitability. analysis of capacity and Algorithm bits it is confirmed that the proposed algorithm will not affect the system operation and the optimal algorithm is derived. compared with the initial data, we can confirm that the algorithm can guarantee data undulation.

• Fire Science and Engineering
• /
• v.22 no.5
• /
• pp.112-124
• /
• 2008

The extra session of the 17th National Assembly convened lastly had passed the law on the promotion of the fire industry. Therefore, the development of the fire industry discussed insignificantly in accordance with the establishment of the law. In this important time, this study was intended to derive tasks for development through researching the concept and developing process of the fire industry and forecasting the industry. For defining the concept of the fire industry, this study researched meaning, the present status and features of the industry. For study of developing process of the fire industry, this study analysed fire law and system, fire codes, fire products and development of fire market. The analyses were processed as a unit of every 10 years from 1960's. Consequently, this study presented some tasks for development of the fire industry such as fire inspection system, fire products circulation system, separated ordering system, managing system of fire facilities and technical R & D of the fire industry based on analysing and forecasting the fire industry.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.38 no.6
• /
• pp.372-378
• /
• 2005

An analysis method of tetracyclines far fish and shellfish products containing large amount of low molecular materials and pigments was established. The recovery of the established analysis method for four tetracycline samples was $72-100\%$ and higher than other methods reported. Especially, proposed sample treatment protocol was shown to be effective for the removal of low molecular materials and pigments that tend to interfere with accurate analysis. The detection limit of oxytetracycline (OTC) and tetracycline (TC) from the sample was 0.02 ppm, and the detection limit of chlortetracycline (CTC) and doxycycline (DC) from the sample was 0.1ppm, To examine the efficiency of the established method and identify tetracycline usage in fish farms, tetracycline group antibiotics in the flounder being cultured was monitored. The improved method can be used for fish and shellfish products effectively and all surveyed fish farms have used tetracycline all the year round. The proposed method was adopted as official method for fishery products by Korean Food and Drug Administration in 2003 and it is being used by regulatory authority as National Fishery Products Quality Inspection Service.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.38 no.6
• /
• pp.379-384
• /
• 2005

A high-performance liquid chromatography assay method for oxolinic acid in fish products was developed, evaluated and validated through the monitoring of oxolinic acid based on farming and distribution. The recovery rate of the developed method was $102.3-106.7\%$ as compared to conventional methods. The stock solution was stable for 3 weeks under refrigerated condition at $4^{\circ}C$ The performance limit was evaluated as 0.01ppm of oxolinic acid in fish muscle. 478 fish samples such as olive flounder, genuine porgy, common sea bass and black rock fish collected from fish farms in the coastal area from September 2001 to October 2004 were analyzed to evaluate overall efficiency of the modified method and to monitor the actual condition of oxolinic acid usage in fish farm. According to the monitoring results, the modified method was suitable for analysis of oxolinic acid in fish muscle and oxolinic acid might be used in a small portion of fish farms. The suggested analysis method of oxolinic acid was registered in the Korean Official Methods of Food Analysis and is being utilized for fishery products by the Korea Food and Drug Adminstration and the National Fisheries Products Quality Inspection Service.

• Journal of Fashion Business
• /
• v.16 no.6
• /
• pp.21-35
• /
• 2012

In consideration of the injuries and deaths occurring at manufacturing sites due to the use of inappropriate work clothes or safety devices, this study aims to categorize manufacturing work processes to develop functional work clothes for heavy industries including the automobile, machine and shipbuilding industries in South Korea. Defining the features of the work environments and work postures of these industries provided for a categorization of the work processes which would enable the development of suitable work clothes for each work process' category. The results of the study based on a questionnaire survey are as follows: Work process category 1, including steel panel pressing and auto body assembly, final inspection (in automobile) and inspection (in machine), requires work clothes with upper body and arm mobility and performance to protect from the toxic fume factor. Work process category 2, consisting of welding (in automobile), cutting-and-forming (in machine) and attachment-and-construction (in shipbuilding), requires clothing elasticity, durability and heat and fire resistance. Work process category 3 comprising welding and grinding in the machine and shipbuilding industries, requires work clothes' tear resistance and elasticity, particularly for lateral bending mobility, and work clothes' sleeves' and pants' hemlines with sealed designs to defend against iron filing penetration, as well as incombustible and heat-resistant material performance. Finally, work process category 4, including painting in machine and shipbuilding, requires work clothes with waterproofing, air permeability, thermal performance, elasticity, durability and abrasion resistance.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.14 no.2
• /
• pp.121-127
• /
• 2010

An experimental study of composite beam with perforated fiber reinforced polymer(FRP) plank as a permanent formwork and the tensile reinforcement was performed. A combined formwork and reinforcement system can facilitate rapid construction of concrete members since no conventional formwork is needed, which requires time consuming assembly and dismantling. In order for a smooth FRP plank to act compositely with the concrete, the surface of the FRP needs to be treated to increase its bond properties. Aggregates were bonded to the FRP plank using a commercially available epoxy and perforated web of plank. No additional flexural or shear reinforcement was provided in the beams. For comparison, two control specimens were tested. One control had no perforated hole in the web of FRP plank and the other had internal steel reinforcing bars instead of the FRP plank. The beams were loaded by central patch load to their ultimate capacity. This study demonstrates that the perforated FRP plank has the potential to serve as a permanent formwork and reinforcing for concrete beam.