• Title/Summary/Keyword: Aspect dependence

Search Result 72, Processing Time 0.024 seconds

Construction of a Data Bank for Acoustic Target Strength with Fish Species, Length and Acoustic Frequency for Measuring Fish Size Distribution (어류 체장의 자동 식별을 위한 어종별, 체장별 및 주파수별 음향 반사 강도의 데이터 뱅크 구축)

  • LEE Dae-Jae;SHIN Hyeong-Il
    • Korean Journal of Fisheries and Aquatic Sciences
    • /
    • v.38 no.4
    • /
    • pp.265-275
    • /
    • 2005
  • A prerequisite for deriving the abundance estimates from acoustic surveys for commercially important fish species is the identification of target strength measurements for selected fish species. In relation to these needs, the goal of this study was to construct a data bank for converting the acoustic measurements of target strength to biological estimates of fish length and to simultaneously obtain the target strength-fish length relationship. Laboratory measurements of target strength on 15 commercially important fish species were carried out at five frequencies of 50, 70, 75, 120 and 200 kHz by single and split beam methods under the controlled conditions of the fresh and the sea water tanks with the 389 samples of dead and live fishes. The target strength pattern on individual fish of each species was measured as a function of tilt angle, ranging from $-45^{\circ}$ (head down aspect) to $+45^{\circ}$ (head up aspect) in $0.2^{\circ}$ intervals, and the averaged target strength was estimated by assuming the tilt angle distribution as N $(-5.0^{\circ},\;15.0^{\circ})$. The TS to fish length relationship for each species was independently derived by a least-squares fitting procedure. Also, a linear regression analysis for all species was performed to reduce the data to a set of empirical equations showing the variation of target strength to a fish length, wavelength and fish species. For four of the frequencies (50, 75, 120 and 200 kHz), an empirical model for fish target strength (TS, dB) averaged over the dorsal sapect of 602 fishes of 10 species and which spans the fish length (L, m) to wavelength (\Lambda,\;m)$ ratio between 5 and 73 was derived: $TS=19.44\;Log(L)+0.56\;Log(\Lambda)-30.9,\;(r^2=0.53)$.

Fish length dependence of target strength for black rockfish, goldeye rockfish at 70kHz and 120kHz (70kHz 및 120kHz에 있어서 조피볼락, 불볼락에 대한 반사강도의 체장 의존성)

  • Mun, Jae-Ho;Lee, Dae-Jae;Shin, Hyeong-Il;Lee, Yoo-Won
    • Journal of the Korean Society of Fisheries and Ocean Technology
    • /
    • v.42 no.1
    • /
    • pp.30-37
    • /
    • 2006
  • Black rockfish and goldeye rockfish are commercially important fish species due to the increasing demand in Korea. When estimating the abundance of stocks for these species acoustically, it is of crucial importance to know the target strength(TS) to length dependence. In relation to these needs, TS measurement was conducted on black rockfish and goldeye rockfish in an acrylic salt water tank using 70kHz and 120kHz split beam echo sounders. The TS for these two species under the controlled condition was simultaneously measured with the swimming movement by DVR system and analyzed as a function of fish length(L). The results obtained are summarized as follows: The best fit regression of TS on fish length of black rockfish was TS=19.38 Log(L, cm)-70.46 ($r^2=0.71$) at 70kHz and TS=22.39 Log(L, cm)-70.40 ($r^2=0.64$) at 120kHz and in the standard form TS=20 Log(L, cm)-71.29 ($r^2 = 0.70$) at 70kHz and TS=20 Log(L, cm)-66.88 ($r^2=0.57$) at 120kHz. The best fit regression of TS on fish length of goldeye rockfish was TS=17.10 Log(L, cm)-68.28 ($r^2=0.37$) at 70kHz and TS=24.39 Log(L, cm)-73.74 ($r^2=0.59$) at 120kHz and in the standard form TS=20 Log(L, cm)-72.03 ($r^2=0.32$) at 70kHz and TS=20 Log(L, cm)-67.68 ($r^2=0.64$) at 120kHz. An empirical model for fish TS(dB) averaged over the dorsal aspect of 115 fishes of black rockfish and goldeye rockfish and which spans the fish length(L, m) to wavelength($\lambda$, m) ratio between 8 and 30 was derived : TS=34.12 Log(L)-14.12 Log($\lambda$)-23.83, ($r^2=0.90$).

A Study on Clothing Interests of High School Girls (여고생의 의복 흥미도에 관한 조사 연구)

  • Choi, Joung-Hee;Kim, Woon-Ju
    • Korean Journal of Human Ecology
    • /
    • v.2 no.1
    • /
    • pp.45-51
    • /
    • 1993
  • The purpose of this study is to provide some information for the proper education on clothing wearing habits so that the education may be performed in the direction of social needs according to the social change and in the direction of the needs and interest of the high school girl students in their adolescence by being conscious of the influence of clothing on the high school girl students. I have used questionaire as an instrument of measurement. The length of the time of survey is from February 11, 1991 to February 28. The subjects are 544 first grade girl students of general high schools in Cheong-Ju, Choong-Ju, and Je-Cheon. The analysis of the data includes frequency, percentage, average person's Correlation Program, t-test, ANOVA, Scheffe's test. The conclusion of this study is as follows: The first, it is shown that (l)students's interest in the design and fashion of clothing is significantly related to the socio-anthropological and socio-psychological factors such and the education level of their fathers, the education level of their mothers, monthly income of their homes, the clothing habits of their home economics teachers, the subjects which they are interested in, their average scholoary achievements, their religious background, and whether they have boy friends or not, etd. (2)students' interest in purchasing of clothing is significantly related to the socio-anthropological and socio-psychological factors such as the education level of their fathers, the education level of their mothers, monthly income of their homes, the clothing habits of their home economics teachers, the subjects which they are interested in, their average scholoary achievements, and whether they have boy friends or not, etc. (3)students' interest in the social-psyclological aspect is significantly related to the socio-anthropological and socio-psychological factors such as their living area, the clothing habits of their home economics teachers, etc. (4)students' interest in the clothing construction is significantly related to only the clothing habits of their home economics teachersl. (5)students' interest in the clothing management is significantly related to the socio-anthropological and socio-psychological factors such as the education level of their parents, the age of their mothers, their religious background, and their sisters. The second, as for the interest of the high school girl students in clothing, it has been shown that those who wear school uniforms tend to have more interest than those who wear free-choice clothes in such areas as shopping, the construction, and management. As for the other two areas, that is, disign and fashion, and the interest in socio-psychological dependence there has been little meaningful difference between the two groups, while the uniform group has shown more interest than the other group. The third, the interest of hish school students in clothing is considered to be most seriously influenced by their socio-psychological dependence out of five areas of interest. It has been shown that the proportion of the content dealing with clothing wearing life in the high school home economics texbooks in relatively small, especially in such areas as socio-psychological dependence, shopping, management, and design and fashion except in construcion.

  • PDF

Multipath Ghosts in Through-the-Wall Radar Imaging: Challenges and Solutions

  • Abdalla, Abdi T.;Alkhodary, Mohammad T.;Muqaibel, Ali H.
    • ETRI Journal
    • /
    • v.40 no.3
    • /
    • pp.376-388
    • /
    • 2018
  • In through-the-wall radar imaging (TWRI), the presence of front and side walls causes multipath propagation, which creates fake targets called multipath ghosts. They populate the scene and reduce the probability of correct target detection, classification, and localization. In modern TWRI, specular multipath exploitation has received considerable attention for reducing the effects of multipath ghosts. However, this exploitation is challenged by the requirements of the reflecting geometry, which is not always available. Currently, the demand for a high radar image resolution dictates the use of a large aperture and wide bandwidth. This results in a large amount of data. To tackle this problem, compressive sensing (CS) is applied to TWRI. With CS, only a fraction of the data are used to produce a high-quality image, provided that the scene is sparse. However, owing to multipath ghosts, the scene sparsity is highly deteriorated; hence, the performance of the CS algorithms is compromised. This paper presents and discusses the adverse effects of multipath ghosts in TWRI. It describes the physical formation of ghosts, their challenges, and existing suppression techniques.

Fabrication and Characterization of AAO Template with Variation of the Phosphoric Acid Amount of the Etching Solution (에칭용액의 인산 첨가량에 따른 양극산화 알루미늄 템플레이트의 제작 및 특성)

  • Jo, Ye-Won;Kim, Yong-Jun;Yeo, Jin-Ho;Lee, Sung-Gap;Kim, Young-Gon
    • Journal of the Korean Institute of Electrical and Electronic Material Engineers
    • /
    • v.27 no.7
    • /
    • pp.448-451
    • /
    • 2014
  • Anodic aluminum oxides (AAO) fabricated by the two-step anodizing process have attracted much attention for the fabrication of nano template because of pore structure with high aspect ratio, low cost process and ease of fabrication. AAOs are characterized by a homogeneous morphology of parallel pores that grow perpendicular to the template surface with a narrow distribution of diameter, length and inter-pores spacing, all of which can be easily controlled by suitably choosing of the anodizing parameters such as pH of the electrolyte, anodizing voltage and duration of anodizing. In this study, AAO templates were characterized by X-ray diffraction and field-emission scanning electron microscope (FE-SEM). The dependence of the pore size change according to the amount of addition of phosphoric acid, which was used to remove the initial alumina oxide layer, was not observed.

Comparison of the rheologies of laterite and goethite suspensions

  • James, David F.;Blakey, Brian C.
    • Korea-Australia Rheology Journal
    • /
    • v.16 no.3
    • /
    • pp.109-115
    • /
    • 2004
  • Comparisons in shear behaviour are made between aqueous suspensions of a laterite ore and aqueous suspensions of pure goethite ($\alpha$-FeOOH), following prior papers in which the rheologies of the two mineral suspensions were characterized individually. Drawing comparisons is appropriate because the ore sample was about 65% goethite and it was originally thought that the pure goethite might serve as a model of the more complex laterite. Viscosity measurements of the two suspensions show that, at the same solids fraction, the goethite suspensions were more viscous by an order of magnitude, even though the goethite particles had much smaller aspect ratios. Similarly, yield stresses for the goethite suspensions were at least an order of magnitude higher. The most significant difference was in transient behaviour. Time-dependent effects were investigated by subjecting a fluid to a step change or a ramp sequence in shear rate, and measuring the resulting shear stress over time. In most cases, transient behaviour could not be detected in the goethite suspensions, whereas stresses in the laterite suspensions relaxed over periods of order 10 seconds. The disparate results indicate that a goethite suspension is a poor model of a laterite slurry.

Change in Molecular Weight Distribution of Diffusible Species on RTV Silicone Rubber Using Solvent Extraction and Recovery Rate of Hydrophobicity (용매추출에 의한 옥외용 RTV 실리콘고무의 분자량 변화와 발수성 회복속도)

  • Lee, Chang-R.;Kim, Dong-H.;Choi, Yong-C.;Kim, Jong-G.;Homma, H.;Izumi, K.
    • Proceedings of the KIEE Conference
    • /
    • 2001.07c
    • /
    • pp.1337-1339
    • /
    • 2001
  • We have investigated the relation between the molecular weight distribution (MWD) of diffusible species and the recovery rate of hydrophobicity of room-temperature vulcanizing (RTV) silicone rubber (SIR) using solvent extraction at various temperatures. It was observed that the extract had a MWD ranging from a few hundreds g/mol to hundreds of thousands g/mol. By measuring the migration of siloxane to the extracted SIR surface through a thin carbon coating, the aspect of migration of diffusible species was observed as a real time plot, and the time constant of the migration was also calculated. According to the time dependence of IR-absorbance, the time constant was increased with the increase of MW of the extracts.

  • PDF

The Improvement Plan of the Curriculum for Development in Study of Security (경호학의 발전을 위한 교육과정 개선방안)

  • Jeong, Youn-min;Bak, Jun-seok;Yang, Deok-youl
    • Journal of the Society of Disaster Information
    • /
    • v.5 no.2
    • /
    • pp.88-106
    • /
    • 2009
  • The potential risks of Korean public security has been increasing by economic stagnation. As a result of this, a feeling of unrest about our society causes expansion of private security industry as well as necessity of professional education. It has been 15years to produce security expert in colleges which is professional education institute, and academic efforts and contributions to society are shown remarkable results for the period. A private security industry had got public interest as a potential favorable job, because of increasing dependence of public to take care of unrest facts. Many colleges have introduced courses about public security because of facing necessity of professional education system. Then total 59 institutes including 22 universities and 37 colleges introduce courses of public security. Although name of courses are diverse depends on institution, purpose of course or members of course, the ultimate purpose of these courses is preventing public from crimes and managing public security. A fixed and out of date education system of universities in Korea can not produce talent person who people, companies and government want. The institutions have been recruiting many student so far, and it shows growth of the industry in quantity aspects. However quality aspect of the industry has been failed because it is hard to get a job for graduated students. Consequently, to improve quality of the industry people need cooperation of institution, professors and students.

  • PDF

Dependence of the Morphology of Hydroxyapatite on pH and Solvent Species (용액의 산도 및 용매의 종류에 따른 수산화인회석의 형태 변화 연구)

  • Kim, Youngyon;Kwon, Ki-Young
    • Applied Chemistry for Engineering
    • /
    • v.27 no.5
    • /
    • pp.543-545
    • /
    • 2016
  • Four different hydroxyapatites (HAP) were prepared by a solvothermal method under different pHs and solvent species. The synthesized hydroxyapatites were analyzed by X-ray diffraction (XRD) and transmission electron microscopy (TEM). Four HAPs exhibited similar XRD patterns regardless of synthetic conditions. However, the morphology of hydroxyapatites was dependent of pH and solvent species under synthetic condition. The HAP prepared in pH 12 showed an elongated shape along the [001] direction compared to that prepared in pH 8. Also, the morphology of the HAPs synthesized in the presence of methanol and ethanol exhibited the more elongated hexagonal rod shape along the [001] direction with the high aspect ratio.

Temperature Dependent Photoluminescence from InAs/GaAs Quantum Dots Grown by Molecular Beam Epitaxy

  • Lee, Kyoung Su;Oh, Gyujin;Kim, Eun Kyu;Song, Jin Dong
    • Applied Science and Convergence Technology
    • /
    • v.26 no.4
    • /
    • pp.86-90
    • /
    • 2017
  • We have reported structural and optical properties of self-assembled InAs/GaAs quantum dot (QD) grown by molecular beam epitaxy with different arsenic to indium flux ratios (V/III ratios). By increasing the V/III ratio from 9 to 160, average diameter and height of the InAs QDs decreased, but areal density of them increased. The InAs QDs grown under V/III ratio of 30 had a highest-aspect-ratio of 0.134 among them grown with other conditions. Optical property of the InAs QD was investigated by the temperature-dependent photoluminescence (PL) and integrated PL. From the temperature dependence PL measurements of InAs QDs, the activation energies of $E_{a1}$ and $E_{a2}$ for the InAs QDs were obtained $48{\pm}3meV$ and $229{\pm}23meV$, respectively. It was considered that the values of $E_{a1}$ and $E_{a2}$ are corresponded to the energy difference between ground-state and first excited state, and the energy difference between ground-state and wetting layer, respectively.