• 박물관보존과학
• /
• 제13권
• /
• pp.45-49
• /
• 2012

창원 다호리 유적 6호분에서 출토된 유리구슬편 14점에 대하여 과학적인 분석을 실시하였다. 유리편은 대부분 감청색의 투명한 유리로 원형의 기포들이 일정한 방향으로 나열되어 있다. SEM/EDS 분석결과 유리편은 모두 포타쉬유리군(K₂O-SiO₂)이며 CaO 및 Al₂O₃의 함량은 모두 5%이하인 LCA(Low CaO, Low Al₂O₃)계 유리로 확인되었다. 또한 포타쉬원료는 식물제를 정제하거나 광물(초석, KNO₃)을 사용한 것으로 판단되며 감청색을 내는 발색제로 작용하는 성분은 CuO의 영향이 큰 것으로 판단된다.

• 한국방사선학회논문지
• /
• 제14권2호
• /
• pp.85-95
• /
• 2020

본 논문에서는 고에너지 엑스선(6MV X선)을 조사한 세뇨관의 세포막 모델에서 오줌의 원료구성성분인 포도당 수용액(H₂O-C₆H₁₂O₆)의 압력차에 따른 여과작용특성에 대하여 연구하였다. 이 실험에 사용한 세포막 모델은 polysulfone 지지막에다가 m-phenylene-diamine(MPD)과 trimesoyl chloride(TMC)- hexane을 계면중합으로 만들어진 여과성 고분자 복합막을 사용하였다. 0.5 wt% TMC- hexane 용액으로 만들어진 여과성막(CM-2)은 0.5 wt% TMC- hexane 용액으로 만들어진 여과성막(CM-1)보다도 총 부피투과플럭스(Jv)와 배제계수(R)가 매우 높다. 압력차(1.5~4MPa)와 36.5℃에서 방사선을 조사한 세뇨관의 고분자 막(세포막모델)은 포도당수용액(H₂O-C₆H₁₂O₆)에서 총 부피투과플럭스(Jv)와 배제계수(R)가 비 조사된 세포막모델보다 각각 약 2 ~ 13배, 4 ~ 6배 정도 감소되었다. 세포막모델에서 포도당수용액(H₂O-C₆H₁₂O₆)의 농도가 증가하면 배제계수(R)가 증가하고 총 부피투과플럭스(Jv)는 감소하였다. 결국 방사선조사로 인해서 세뇨관의 세포막에서 포도당수용액(H₂O-C₆H₁₂O₆)의 여과기능이 비정상적으로 되어 세포장해가 발생하게 되었다고 사료됐다.

• 한국전기전자재료학회논문지
• /
• 제16권10호
• /
• pp.897-901
• /
• 2003

The microstructure and varistor characteristics of ZnO-Pr$_{6}$O$_{11}$-CoO-Cr$_2$O$_3$-Dy$_2$O$_3$(ZPCCD)-based ceramics were investigated with Dy$_2$O$_3$ content in the range of 0.0∼2.0 mol%. As Dy$_2$O$_3$ content is increased, the average grain size was decreased in the range of 18.6∼4.7 $\mu$m and the density was decreased in the range of 5.53∼4.34 g/cm$^3$. While, the varistor voltage was increased in the range of 39.4∼436.6 V/mm and the nonlinear exponent was in the range of 4.5-66.6 with increasing Dy$_2$O$_3$ content. The addition of Dy$_2$O$_3$ highly enhanced the nonlinear properties of varistors, compared with the ceramics without Dy$_2$O$_3$ Particularly, the ceramics with Dy$_2$O$_3$ content of 0.5 mol% exhibited the highest nonlinearity, in which the nonlinear exponent is 66.6 and the leakage current is 1.2 $\mu$A.A.A.

• 한국재료학회지
• /
• 제32권1호
• /
• pp.1-8
• /
• 2022

In this investigation, Bi₂MoO₆ deposited graphene nanocomposite (BMG) was synthesized using a simple microwave assisted hydrothermal synthesis method. The synthesized BMG nanocomposite was characterized by X-ray diffraction, transmission electron microscopy, scanning electron microscopy with energy dispersive X-ray analysis, and photocurrent analysis. The study revealed that the catalysts prepared have high crystalline nature, enhanced light responsive property, high catalytic activity, and good stability. XRD results of BMG composite exhibit a koechlinite phase of Bi₂MoO₆. The surface property is shown by SEM and TEM, which confirmed a homogenous composition in the bulk particles of Bi₂MoO₆ and nanosheets of graphene. The catalytic behavior was investigated by the decomposition of Rhodamine B as a standard dye. The results exhibit excellent yields of product derivatives at mild conditions under ultrasonic/visible light-medium. Approximately 1.6-times-enhanced sono-photocatalytic activity was observed by introduction of Bi₂MoO₆ on graphene nanosheet compared with control sample P25 during 50 min test.

• 한국재료학회지
• /
• 제13권10호
• /
• pp.645-650
• /
• 2003

The microstructure and electrical characteristics of $Pr_{6}$ $O_{11}$ -based ZnO varistor ceramics composed of $ZnO-Pr_{6}$ $O_{ 11}$/$-CoO-Cr_2$$O_3$-$Dy_2$$O_3$-based ceramics were investigated with $Dy_2$$O_3$content in the range of 0.0∼2.0 mol%. As $Dy_2$$O_3$content was increased, the average grain size was decreased in the range of 18.6∼4.7 $\mu\textrm{m}$ and the density of the ceramic was decreased in the range of 5.53∼4.34 g/㎤. While, the varistor voltage was increased in the range of 39.4∼436.6 V/mm and the nonlinear exponent was in the range of 4.5∼66.6 with increasing $Dy_2$$O_3$content. The addition of $Dy_2$$O_3$highly enhanced the nonlinear properties of varistors, compared with the varistor without $Dy_2$$O_3$. In particular, the varistor with $Dy_2$$O_3$ content of 0.5 mol% exhibited the highest nonlinearity, in which the nonlinear exponent is 66.6 and the leakage current is 1.2 $\mu\textrm{A}$. The donor concentration and the density of interface states were decreased in the range of $(4.19∼0.33) ${\times}$10^{18}$ //㎤ and $(5.38∼1.74) ${\times}$10^{12}$ $\textrm{cm}^2$, respectively, with increasing $Dy_2$$O_3$content. The minimum dissipation factor of 0.0302 was obtained from 0.5mol% $Dy_2$$O_3$.

• Journal of Electrochemical Science and Technology
• /
• 제6권2호
• /
• pp.59-64
• /
• 2015

Spherical Li₄Ti₅O₁₂ and Li₄Ti₅O₁₂ carbon nanotube (CNT) composites were synthesized using a colloid system. The electrochemical properties of the composites were thoroughly examined to determine their applicability as hybrid capacitor anodes. The electrical conductivity of the spherical Li₄Ti₅O₁₂-CNT composite was improved over that of the spherical Li₄Ti₅O₁₂ composite. The synthesized composites were utilized as the anode of a hybrid capacitor, which was assembled with an activated carbon (AC) positive electrode. The CNTs attached on the spherical Li₄Ti₅O₁₂ particles contributed to a 51% reduction of the equivalent series of resistance of the Li₄Ti₅O₁₂-CNTs/AC hybrid capacitor compared to the Li₄Ti₅O₁₂/AC hybrid capacitor. Moreover, the Li₄Ti₅O₁₂-CNTs/AC hybrid capacitor showed a larger capacitance than the Li₄Ti₅O₁₂/AC hybrid capacitor; specifically, the Li₄Ti₅O₁₂-CNT/AC hybrid capacitor showed 1.6 times greater capacitance at 40 cycles with a 10 mA cm⁻² loading current density.

• 한국환경과학회지
• /
• 제22권1호
• /
• pp.83-89
• /
• 2013

Silicon carbide with aluminium oxide was used to remove the sulphur hexafluoride ($SF_6$) gas using microwave irradiation. The destruction and removal efficiencies (DREs) of $SF_6$ were studies as a function of various decomposition temperatures and microwave powers. The decomposition of $SF_6$ gas was analyzed using GC-TCD. XRD (X-ray powder diffraction) and XRF (X-ray Fluorescence Spectrometer) were used to characterize the properties of aluminum oxide. DREs of $SF_6$ were increased as the microwave powers were increased. Additive aluminium oxide on SiC increased the removal efficiencies and decreased the decomposition temperature. The XRD results show that the ${\gamma}-Al_2O_3$ was transformed to ${\alpha}-Al_2O_3$ during $SF_6$ decomposition by microwave irradiation. It was found that the best material to control $SF_6$ was SiC with $Al_2O_3$ 30 wt% in consideration of microwave energy consumption and $SF_6$ decomposition rate.

• 공업화학
• /
• 제10권3호
• /
• pp.331-335
• /
• 1999

진이급속 산화물은 전기화학적 산소 발생/환원에 대한 bifunctional 촉매효과가 있어 금속-공기 이차전지와 같은 에너지 저장기술 개발에 연구대상이 되어왔다. Amorphous citrate precursor법을 이용하여 perovskite 구조를 갖는 La-Ca-Co 산화물과 pyrochlore 구조를 갖는 Pb-Ru 산화물을 제조하고, 이후 열처리법으로 표면적이 큰 전이금속 산화물 촉매분말을 제조하였다. PTFE 결합 기체확산형 전극의 충방전 실험을 통하여 전기화학적 산소발생/환원에 대한 좋은 촉매능을 가짐을 확인하였고, ${\pm}25mA/cm^2$의 전류밀도를 가하고 공기를 공급하면서 충방전 실험한 결과 100시간 이내에서 두촉매분말 모두 안정하였다. ACP법으로 제조한 perovskite 구조의 La0.6Ca0.4CoO3과 pyrochlore 구조의 Pb2Ru2O6가 이차전지용 공기전극 재료로 사용할 수 있음을 확인하였다.

• Corrosion Science and Technology
• /
• 제21권6호
• /
• pp.445-453
• /
• 2022

SiO_x was prepared from a mixture of Si and SiO₂ via high-energy ball milling as a negative electrode material for Li-ion batteries. The molar ratio of Si to SiO₂ as precursors and the milling time were varied to identify the synthetic condition that could exhibit desirable anode performances. With an appropriate milling time, the material showed a unique microstructure in which amorphous Si nanoparticles were intimately embedded within the SiO₂ matrix. The interface between the Si and SiO₂ was composed of silicon suboxides with Si oxidation states from 0 to +4 as proven by X-ray photoelectron spectroscopy and electrochemical analysis. With the addition of a conductive carbon (Super P carbon black) as a coating material, the SiO_x/C manifested superior specific capacity to a commercial SiO_x/C composite without compromising its cycle-life performance. The simple mechanochemical method described in this study will shed light on cost-effective synthesis of high-capacity silicon oxides as promising anode materials.

• Transactions on Electrical and Electronic Materials
• /
• 제16권6호
• /
• pp.308-311
• /
• 2015

V₂O₅/Mn₃O₄/Nb₂O₅ codoped zinc oxide varistor ceramics were sintered at a temperature range as low as 875~950℃. The voltage clamping characteristics of V₂O₅/Mn₃O₄/Nb₂O₅ codoped zinc oxide varistor ceramics were investigated at a pulse current range of 1~50 A. The sintering temperature had a significant effect on clamp voltage ratio, which exhibits surge protection capabilities. The varistor ceramics sintered at 875℃ exhibited the best clamping characteristics, in which the clamp voltage ratio was 2.69 at a pulse current of 50 A. The varistor ceramics sintered at 900℃ exhibited the highest electrical stability, where = 3,824 V/cm (initial 3,909 V/cm), and E_{1 mA/cm²} = 27 (initial 39) after application of a pulse current of 100 A.