• 한국가구학회지
• /
• 제21권3호
• /
• pp.205-215
• /
• 2010

The professional alliance between disciplines of architecture and furniture design in the interwar years as displayed in the prominent architectural exhibitions of the era is interesting in the context of professionalization of American architecture. The way furniture design gradually became part of the architectural shows not only reflected but provided the practical field in which the architectural institution sought, under the new social order since the mid 1910s, a new professional cast-departing from the former milieu in the realm of high-art by the Beaux-Arts Movement. Exhibitions held by the Architectural League of New York in the 1920s revealed that the early impetus for reformation toward efficiency had been subsumed by the system of Beaux-Arts. By contrast, "The Architect and the Industrial Arts" show of the Metropolitan Museum of Art, in which the most prominent architects of the era exercised their professional expertise in the design of "Moderne Style" interior furnishings, clearly shows how architects, in the milieu of expanding commercial market, sought to align their profession as industrial designers.

• 한국인쇄학회지
• /
• 제20권2호
• /
• pp.85-93
• /
• 2002

Recently, the flatbed scanner is widely used to input color original copy in printing industry. In the process of RGB-to-CMY transformation for the scanned colors using the look-up table(LUT) based on the color gamut of the actual output device, however, the problem that some colors in the original out of the gamut cannot be printed, may occur. In this study, another color transformation method applicable to any kind of originals using the new LUT with extended gamut based on the ideal output device, was examined and proposed.

• International Journal of Computer Science & Network Security
• /
• 제21권4호
• /
• pp.59-64
• /
• 2021

The article proposes the process of formation of the teacher's innovative competence in the space of lifelong education the foundations of the formation of the teacher's innovative competence in the space of continuous education. The concept of the formation of the teacher's innovative competence in the space of lifelong education is proposed; it includes initial ideas, goals, objectives, patterns, principles, stages, content and technologies implementation of this process.

• 한국조리학회지
• /
• 제22권1호
• /
• pp.141-152
• /
• 2016

Recently, not only development of curriculum associated directly with job, the development of new education model is in great need. So, the purpose of this study is to develop the instructional design guideline utilizing goal-based scenario(GBS) for college students who major in culinary arts. First, to achieve this goal, we recognized the 7 core elements(learning goal, mission, cover story, role activity, scenario operating, resource, feedback) composing GBS through literature review and case study. Second, we drew a conclusion about the problem and guideline for traditional culinary practice course by conducting inspection about culinary practice environment and needs with professors who are teaching culinary arts. Third, we applied the instructional design guideline for culinary practice to regular classes according to GBS's factors, and then we did formative evaluation with content experts and educational technology expert. Finally, we designed the final instructional design guideline for culinary practice by modifying early model reflected the result of formative evaluation. The results of this study are as following. First, when we applied GBS to culinary practice, professors have to focus on process of materialization by developing easy scenario to students. Also, they have to prepare the class circumstance to feel about sense of realism in advance. Second, to give a conjugally new skill at working, professors's effort is important. culinary practice education at college has responsibility to carry out the vocational training that has competitiveness and difference with labor market's needs. Therefore, it is necessary for us to develop the teaching and learning model for culinary practice which is suitable for major based on the manpower demand for industry without causing job mismatch from demand for industry.

• 한국콘텐츠학회논문지
• /
• 제13권10호
• /
• pp.234-255
• /
• 2013

한국영화아카데미는 영화진흥위원회의 전신인 한국영화진흥공사가 미국의 영화시장 개방 압력을 수용하여 1987년 영화시장 개방을 대비하고 한국영화를 육성하기 위해서 1984년에 설립한 한국영화인력 양성을 위한 영화학교이다. 2011년까지 배출한 520명의 졸업생 중에 173명이 한국영화계의 주요 위치에서 활동 중이며, 감독은 101명, 촬영감독은 33명, 프로듀서 18명, 영화학과 대학교수 21명을 배출하였다. 올해로 설립 30주년을 맞이한 한국 영화아카데미는 한국영화시장 개방, 미국영화 직배, 대학에서의 영화교육의 확산, 대기업의 영화산업 참여, 세대교체, 스크린 쿼터 축소, 디지털 시네마로의 이행 등 한국영화산업의 지형의 변화에 따라 변화를 거듭하며 현재에 이르렀으며, 앞으로 영진위와 함께 부산이전을 통해서 부산지역 영화산업의 진흥이라는 새로운 과제와 함께 지역 이전에 따른 핸디캡을 어떻게 슬기롭게 극복하는가 하는 과제에 직면해 있다.

• 한국인쇄학회지
• /
• 제31권1호
• /
• pp.1-14
• /
• 2013

Screen printing is a printing method with flexible plate surface characteristics. In addition, since the appearance of electronics industry the screen printing has been demanding high quality and definition. However, Screen printing is a method for taking ink through mesh opening because screen mesh tends to restrict quality of screen printing. In particular, the biggest problem compared with other printing type is halftone reproduction characteristics. Halftone reproduction characteristics for screen printing depend on screen mesh and opening. Dot losses or dot gains are observed through various types of screen mesh because thread of screen mesh interfere with the movement of the ink. Excessive dot losses or gains can affect the tonal range. Furthermore, this problem can result in other problem such as bad contrast and gray balance. Therefore, it is an important factor to use proper screen mesh for halftone screen printing. However, domestic screen printing industry relies on worker's experience in field rather than depending on objective data although standardized specifications and optimal printing conditions are required for screen printing. For this reason, it is important to stipulate standard condition for domestic screen printing industry. Therefore, it was examined to find tonal range by mesh opening in halftone prints process of screen printing used domestic paper and ink in this study. In addition, TVI(Tone Value Increase) characteristic was observed by comparing to the manuscripts and prints of the dot area ratio. Furthermore, contrast value and gray balance were confirmed for each condition of the printout. Conditions for the proper selection of screen mesh screen for the quality of the prints were also examined, compared with the international standard of screen printing, ISO 12647-5.

• 한국의류산업학회지
• /
• 제24권4호
• /
• pp.460-470
• /
• 2022

Customized cosmetics are emerging as a consumer product that companies should pay attention to in the beauty industry due to the combination of market trends and institutional introduction of customized cosmetics. In this study, six offline service brands and online service brands currently in Korea were selected to understand the current status of domestic customized cosmetics online and offline services and to derive detailed characteristics, and the cases of each brand were analyzed. The results are as follows. First, customized cosmetics services could be classified online and offline. Second, customized cosmetics brands could be divided into general brand types and brand extension types. Third, skin data measurements could be classified into genetic analysis, big data-based surveys, and device measurements. Fourth, customized cosmetics manufacturing could be classified into a device manufacturing system, a consultant manufacturing system, and an individual production process system. Fifth, customized cosmetics distribution and delivery could be classified into same-day sales, general delivery, and regular delivery. The results of this study are meaningful in that they have identified and analyzed the current status of personalized cosmetics on-line and offline systems in recent trends, and it was confirmed that creative attempts in the domestic customized cosmetics market continue to change. It is hoped that this study will provide information and ideas to the beauty industry and related experts in the future and be used as basic data for customized cosmetics marketing

• 펄프종이기술
• /
• 제44권3호
• /
• pp.41-48
• /
• 2012

Materials used for the inks in the printing industry is an important material following the paper. The composition of the ink is pigment and organic solvents. However, Ink is used in a variety of chemicals, they are classified as non-green. Therefore, rosin-modified phenolics manufactured by the reaction of phenol and formaldehyde can take the place of eco-phenol free resin and by experiment density, gloss, trapping, contrast and dot gain of printing has been studied as printability. The result of study can support that the properties of printing using eco-phenol free resin such as density, gloss, contrast and trapping is similar to existing ink. In the part of dot gain, the result is excellent. So we were thought to be able to improve some characteristics such as dispersion of black ink, that will be possible for the field applicability.

• Structural Engineering and Mechanics
• /
• 제68권1호
• /
• pp.1-15
• /
• 2018

In ocean industry, free surface type ART (Anti Roll tank) system has been widely used to suppress the roll motion of floating structures. In those, various obstacles have been devised to obtain the sufficient damping and to enhance the controllability of freely rushing water inside the tank. Most of previous researches have paid on the development of simple mathematical formula for coupled ship-ARTs analysis although other numerical and experimental approaches exist. Little attention has been focused on the use of 3D panel method for preliminary design of free surface type ART despite its advantages in computational time and general capacity for hydrodynamic damping estimation. This study aims at developing a potential theory based hydrodynamic code for the analysis of floating structure with baffled ARTs. The sloshing in baffled tanks is modeled through the linear potential theory with FE discretization and it coupled with hydrodynamic equations of floating structures discretized by BEM and FEM, resulting in direct coupled FE-BE formulation. The general capacity of proposed formulation is emphasized through the coupled hydrodynamic analysis of floating structure and sloshing inside baffled ARTs. In addition, the numerical methods for natural sloshing frequency tuning and estimation of hydrodynamic damping ratio of liquid sloshing in baffled tanks undergoing wave exiting loads are developed through the proposed formulation. In numerical examples, effects of natural frequency tuning and baffle ratios on the maximum and significant roll motions are investigated.

• 한국비블리아학회지
• /
• 제21권3호
• /
• pp.109-122
• /
• 2010

본 연구는 KDC 예술류의 분류항목의 전개가 초판에서 5판까지 개정되는 동안 어떻게 변천되었는지를 분석하여 KDC 예술류의 분류항목전개의 개선점을 제안하는 것이다. 이를 위하여 KDC 초판에서 5판까지 예술류에 사용된 용어의 변천, 보조표 및 주기의 변천과 분류항목전개의 변천을 분석하였다. KDC의 예술류는 3판까지 큰 변화가 없었으며, 분류항목전개의 변화는 4판과 5판에서 많이 이루어졌으나, 전판의 오류와 문제점이 완전히 개선되지는 않았으며, 포함주가 많아 분류항목의 전개가 다른 분류표보다 빈약하였다. 분석결과를 바탕으로 문제의 해결방안을 제시하였다.