• Korean journal of applied entomology
• /
• v.45 no.1 s.142
• /
• pp.75-78
• /
• 2006

Development of pellet-type artificial diet for insect was tried by using a twin screw extruder(TSE). Screws were arranged several times and two reverse screws were equipped on the foreparts of 2 axes of TSE. Pellet-type diet could be produced successfully under conditions of TSE set as the following. : 300 rpm of main motor speed, 228 rpm of feed motor speed, $75m{\ell}/min$ of running water speed and 5 mm of extrusion diameter. The optimum adding quantity of water to the manufactured diet was $1.2{\sim}1.5$ times of dry diet. On the rearing results of beet armyworm, Spodoptera exigua and common cutworm, Spedoptera litura with the pellet-type diet, the final survival ratio (emergence rate) of these two species was over than 50%, and so it was concluded that the manufactured pellet-type artificial diet was sufficient dietetically to rear those insects.

• Journal of Conservation Science
• /
• v.28 no.3
• /
• pp.217-228
• /
• 2012

Damage of cultural properties happens variously. Particularly, the surface damage of metal cultural properties exposed outdoors lowers historical and art historical value of artifact by artificial damage such as paint, scribbling containing oily material and so on. Therefore, this study compared dry-ice pellet cleaning with poultice when clearing paint and oily material environment-friendly, harmlessly to humans and without damage of artifact. As the result of experiment, when clearing those (paint and oily material) by poultice, oily paint was cleared, but there were spots of metal surface. Also, Lacquer spray wasn't well cleared, and resin came off the surface of artifact. When clearing those by dry-ice pellet cleaning, oil paint was cleanly cleared without surface damage of artifact according to Stereoscopic microscope observation, color-measurement, FT-IR, SEM analysis. Also, lacquer spray seemed to be cleared with the naked eye, but there were minute particles on surface according to the result of SEM observation. Consequently, we could confirm possibility of dry-ice pellet cleaning substitution.

• Progress in Superconductivity and Cryogenics
• /
• v.22 no.1
• /
• pp.1-6
• /
• 2020

This is a parameter study for the direct fabrication of a large grain YBCO bulk superconductors using Y₂O₃, BaCO₃ and CuO powders without any grinding step. The cracks, which have been formed due to volume contraction during calcination step, have been prevented by controlling the heating rate at 930~950 ℃. It has been observed that multi-grain growth has occurred due to the dissolution of Sm123 seed due to the retention of carbon in Ba-Cu-O melt. In order to accelerate the carbon release in prior calcination heat treatment, the reduction of pellet thickness and the drilling of artificial holes have been applied. Single-grain YBCO bulk superconductor has been successfully fabricated by stacking multiple thin slab. However, the crack formation has been rather prominent for the compact with artificial holes. The use of buffer pellet, which is supposed to act as diffusion barrier, has prevented the dissolution of Sm123 seed crystal and has led to the growth of single grain of high content of carbon containing specimen.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.28 no.1
• /
• pp.1-4
• /
• 2014

The effect of an artificial diet on developmental rate, a life history parameter, was examined for the swallowtail butterfly Papilio xuthus. Artificial insect diets are an essential component of many insect rearing systems that produce insects for research purposes. Complex agar-gelled diets are generally prepared in large batches and used shortly after preparation because the degradation of perishable diet ingredients, such as vitamins and fatty acids, can adversely affect insect quality (Brewer 1984). However, the timing of diet preparation may be inconvenient, and large batches wasteful, if the unused excess is discarded. The percentage of pupation varied considerably, with no significant differences among diets, on which a maximum pupation percentage of 83% was observed. Pellet-type diets were investigated with the aim of developing a more easily prepared diet. The extrusion of the artificial diet under high temperature and pressure may induce desirable chemical and physical changes in the extruded product. The purpose of the present study was to develop an artificial diet for rearing P. xuthus.

• Advances in concrete construction
• /
• v.9 no.2
• /
• pp.183-193
• /
• 2020

The present investigation is to identify an optimum mix combination amongst 28 different types of artificial lightweight aggregates by pelletization method with aggregate properties. Artificial aggregates with different combinations were manufactured from fly ash, cement, hydrated lime, ground granulated blast furnace slag (GGBFS), silica fume, metakaolin, sodium bentonite and calcium bentonite, at a standard 17 minutes pelletization time, with 28% of water content on a weight basis. Further, the artificial aggregates were air-dried for 24 hours, followed by hardening through the cold-bonding (water curing) process for 28 days and then testing with different physical and mechanical properties. The results found the lowest impact strength value of 16.5% with a cement-hydrated lime (FCH) mix combination. Moreover, the lowest water absorption of 16.5% and highest individual pellet crushing strength of 36.7 MPa for 12 mm aggregate with a hydrated lime-GGBFS (FHG) mix combination. The results, attained from different binder materials, could be helpful for manufacturing high strength artificial aggregates.

• Phonetics and Speech Sciences
• /
• v.8 no.3
• /
• pp.31-38
• /
• 2016

Speech inversion (acoustic-to-articulatory mapping) is not a trivial problem, despite the importance, due to the highly non-linear and non-unique nature. This study aimed to investigate the performance of Deep Neural Network (DNN) compared to that of traditional Artificial Neural Network (ANN) to address the problem. The Wisconsin X-ray Microbeam Database was employed and the acoustic signal and articulatory pellet information were the input and output in the models. Results showed that the performance of ANN deteriorated as the number of hidden layers increased. In contrast, DNN showed lower and more stable RMS even up to 10 deep hidden layers, suggesting that DNN is capable of learning acoustic-articulatory inversion mapping more efficiently than ANN.

• Resources Recycling
• /
• v.7 no.1
• /
• pp.20-26
• /
• 1998

The mdy is to investigate the capanty and charactoristics of ammonia removal from waste water by artificial zeolite pellet which was synlhesized physicochemically using fly ash. A multi-stage adsorption method was adapted anrl the zeolile pellct as well as two types of natural zeolites are used for adsorption tests of ammonia io order to compare he adsorption capabilities with one anothcr. The expzrimmts was conducted into thrze stages, lhat is early, mddle and last according la the adsorbing stage and lhe number of column used. When camparing the removal efiicicncy in the final stage namral rcolites ratcd 64.5% and 78 5%, while zeohtc pdct rated 80.596, which showed larger amount of ammonia was adsorbed continuously than in other samples. Thc amount of adsorbed ammonia increased rs thc concenlraiion of ammonia increased and tl~e va~iation depending on the pH range showcd that larger amaunt of ammonia tended to be adsorbed m the neutral or akali pH range than in the acid pH range.

• Asian-Australasian Journal of Animal Sciences
• /
• v.19 no.5
• /
• pp.720-726
• /
• 2006

In an attempt to develop an artificial diet for growing olive flounder (Paralichthys olivaceus), weight gain, feed utilization and nutrient retention were investigated in fish fed moist (MP), semi-moist (SMP) and extruded pellets (EP). Excretion of nitrogen and phosphorus was also estimated based on their whole body gain and intake. EP and MP composed of raw fish and SMP made of formulated powder feed with water were prepared to have the same energy contents on a dry matter basis. A total of 240 fish with an average initial weight of 120 g were randomly distributed to each (20 fish/tank) of 12 circular plastic tanks (4 tanks/treatment) and fed experimental diets for 8 weeks. Fish groups fed EP (209 g) or SMP (209 g) recorded higher final weight than those fed MP (176 g), while dry feed consumption was highest in SMP groups (106 g), followed by MP (71 g) and EP groups (62 g). As a consequence, fish groups fed EP showed much lower feed conversion ratio than the other two groups. Protein efficiency ratio was also significantly higher in fish groups fed EP (2.55) than in those fed MP (1.44) and SMP (1.31). Fish groups fed EP, which showed the highest nitrogen retention of 43.9%, resulted in the lowest excretion of nitrogen of 35.5 g per kg gain. Also, the lowest phosphorus excretion of 6.0 g per kg gain was found in the EP groups with the highest P retention (37.0%) among treatments. Although the EP groups had the lowest dietary energy intake, they retained the highest energy in the whole body among treatments. The present results showed that EP could be more advantageous than MP or SMP in terms of growth, feed utilization and excretion of nitrogen and phosphorus for olive flounder.

• Resources Recycling
• /
• v.18 no.2
• /
• pp.69-76
• /
• 2009

Alumina powder was prepared from heat-treatment of artificial marble waste fine aggregate containing $Al(OH)_3$ for the purpose of the feasibility of its recycling. Artificial marble waste was heat-treated between $500^{\circ}C$ and $1000^{\circ}C$ and XRD, BET surface area, BJH pore size distribution and adsorption of As were analyzed for heat-treated powder. It was found that the adsorption efficiency of As was significantly affected by phase composition of alumina powder rather than its physical characteristic. Heat-treated powder compact was sintered to produce the pellet. Alumina pellet with porosity more than 60% could be obtained after sintering below $1200^{\circ}C$ and also the addition of glass powder as a sintering aid had a positive effect on lowering sintering temperature, led to the high porosity near 60% and adsorption of As over 60% even at $900^{\circ}C$.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.29 no.1
• /
• pp.23-29
• /
• 2016

In this paper, in order to quantify the peristalsis occurrence in a guinea pig's large intestine, a miniaturized air-gap capacitive pressure sensor was fabricated through micro-electro-mechanical system (MEMS). The proposed pressure sensor is a two-layered biocompatible polyimide substrate consisting of an air-gap capacitive plates between the substrates. The proposed pressure sensor was designed with a careful consideration of the structure and motility mechanism of the guinea pig's large intestine. Artificial pellets were mounted on a prototype pressure sensor to provide some redundancies in the form of size and shape of the guinea pig feces. Capacitance of a prototype sensor was recorded to be 2.5 ~ 3 pF. This capacitance value was later converted to count value using a lab fabricated data conversion system. Sensitivity of the pressure sensor was recorded to be below 1 mmHg per atmospheric pressure. During in vivo testing, artificial peristalsis caused by drug injection was measured by inserting the prototype pressure sensor into the guinea pig's large intestine and pressure data obtained due to artificial peristalsis was graphed using a labview program. The proposed pressure sensor could measure the pressure changes in the proximal, medial, and distal parts of the large intestine. The results of the experiment confirmed that pressure changes of guinea pig's large intestine was proportional to the degree of drug injection.