DOI QR코드

DOI QR Code

Effect of different binders on cold-bonded artificial lightweight aggregate properties

  • Vali, Kolimi Shaiksha (Department of Structural and Geotechnical Engineering, School of Civil Engineering, Vellore Institute of Technology) ;
  • Murugan, S. Bala (Department of Structural and Geotechnical Engineering, School of Civil Engineering, Vellore Institute of Technology)
  • 투고 : 2018.10.14
  • 심사 : 2019.12.27
  • 발행 : 2020.02.25

초록

The present investigation is to identify an optimum mix combination amongst 28 different types of artificial lightweight aggregates by pelletization method with aggregate properties. Artificial aggregates with different combinations were manufactured from fly ash, cement, hydrated lime, ground granulated blast furnace slag (GGBFS), silica fume, metakaolin, sodium bentonite and calcium bentonite, at a standard 17 minutes pelletization time, with 28% of water content on a weight basis. Further, the artificial aggregates were air-dried for 24 hours, followed by hardening through the cold-bonding (water curing) process for 28 days and then testing with different physical and mechanical properties. The results found the lowest impact strength value of 16.5% with a cement-hydrated lime (FCH) mix combination. Moreover, the lowest water absorption of 16.5% and highest individual pellet crushing strength of 36.7 MPa for 12 mm aggregate with a hydrated lime-GGBFS (FHG) mix combination. The results, attained from different binder materials, could be helpful for manufacturing high strength artificial aggregates.

키워드

참고문헌

  1. Arslan, H. and Baykal, G. (2006), "Utilization of fly ash engineering pellet aggregates", Envir. Geol., 50, 761-770. https://doi.org/10.1007/s00254-006-0248-7.
  2. Baykal, G. and Doven, A.G. (2000), "Utilization of fly ash as pelletization process; theory, application, areas and research results", Resour. Conserv.Recyc., 30, 59-77. https://doi.org/10.1016/S0921-3449(00)00042-2.
  3. Bilgen, G., Kavak, A., Yildirim, S.T. and apar OF, C. (2010), "Blast furnace slag and its importance in the construction sectors", The Second National Solid Waste Management Conference Mersin.
  4. Bui, L.A.T., Hwang, C.L., Chen, C.T., Lin, K.L. and Hsieh, M.Y. (2012), "Manufacture and performance of cold bonded lightweight aggregate using alkaline activators for high performance concrete", Constr. Build. Mater., 35, 1056-1062. https://doi.org/10.1016/j.conbuildmat.2012.04.032.
  5. Central Electricity Authority (2016), Report on Flyash Generation at Coal/Lignite Based Thermal Power Stations and its Utilization in the Country for the Year 2015-2016, New Delhi.
  6. Chandra, S. and Berntsson, L. (2002), Lightweight Aggregate Concrete: Science, Technology, and Applications, Noyes Publications, Norwich, New York USA.
  7. Chi, J.M., Huang, R., Yang, C.C. and Chang, J.J. (2003), "Effect of aggregate properties on the strength and stiffness of lightweight concrete", Cement Concrete Compos., 25, 197-205. https://doi.org/10.1016/S0958-9465(02)00020-3.
  8. Chore, H.S. and Joshi, M.P. (2015), "Strength evaluation of concrete with fly ash and GGBFS as cement replacing materials", Adv. Concrete Constr., 3(3), 223-236. https://doi.org/10.12989/acc.2015.3.3.223.
  9. Dongxu, L., Zhongzi, X., Zhimin, L., Zhihua, P. and Lin, C. (2002), "The activation and hydration of glassy cementitious materials", Cement Concrete Res., 32, 1145-1152. https://doi.org/10.1016/S0008-8846(02)00755-X.
  10. Doven, A.G. (1998), "Lightweight fly ash aggregate production using cold bonding agglomeration process", PhD Thesis, Bogazici University, Istanbul
  11. EuroLightCon. (1998), LWAC Material Properties State-of-the-Art, The European Union - Brite EuRam III, Document BE96-3942/R2.
  12. Gesoglu, M. (2004), "Effects of lightweight aggregate properties on mechanical, fracture and physical behaviour of lightweight concretes", Ph.D. Thesis, Bogazici University, Istanbul, Turkey.
  13. Gesoglu, M., Guneyisi, E., Ismael, A.N.I. and Oz, H.O. (2015), "Internal curing of high-strength concretes using artificial aggregates as water reservoirs", ACI Mater. J., 809-820.
  14. Gesoglu, M., Ozturan, T. and Guneyisi, E. (2004), "Shrinkage cracking of lightweight concrete made with cold-vonded fly ash aggregates", Cement Concrete Res., 34(7), 1121-1130. https://doi.org/10.1016/j.cemconres.2003.11.024.
  15. Gesoglu, M., Ozturan, T. and Guneyisi, E. (2006), "Effects of cold-bonded fly ash aggregate properties on the shrinkage cracking of lightweight concretes", Cement Concrete Compos., 28(7), 598-605. https://doi.org/10.1016/j.cemconcomp.2006.04.002.
  16. Gesoglu, M., Ozturan, T. and Guneyisi, E. (2007), "Effects of fly ash properties on characteristics of cold-bonded fly ash lightweight aggregates", Constr. Build. Mater., 21(9), 1869-1878. https://doi.org/10.1016/j.conbuildmat.2006.05.038.
  17. IS: 2386-Part I (1963), Standard Test Method for Aggregates for Concrete, Particle Shape and Size, Bureau of Indian Standards, New Delhi, India.
  18. IS: 2386-Part III (1963), Standard Test Method for Density, Relative Density (Specific Gravity), Absorption and Bulk Density (Unit Weight) of Coarse Aggregate, Bureau of Indian Standards, New Delhi, India.
  19. IS: 2386-Part IV (1963), Standard Test Method for Aggregates Mechanical Properties, Bureau of Indian Standards, New Delhi, India.
  20. IS: 9142-Part 2 (2018), Artificial Lightweight Aggregate for Concrete-Specification, Bureau of Indian Standards, New Delhi, India.
  21. Joseph, G. and Ramamurthy, K. (2009), "Influence of fly ash on strength and sorption characteristics of cold-bonded fly ash aggregate concrete", Constr. Build. Mater., 23, 1862-1870. https://doi.org/10.1016/j.conbuildmat.2008.09.018.
  22. Ke, Y., Beaucour, A.L., Ortola, S., Dumontet, H. and Cabrillac, R. (2009), "Influence of volume fraction and characteristics of lightweight aggregates on the mechanical properties of concrete", Constr. Build. Mater., 23, 2821-2828. https://doi.org/10.1016/j.conbuildmat.2009.02.038.
  23. Kisku, N., Joshi, H., Ansari, M., Panda, S.K., Nayak, S. and Dutta, S.C. (2017), "A critical review, and assessment for use of recycled aggregate as sustainable construction material", Constr. Build. Mater., 131, 721-740. https://doi.org/10.1016/j.conbuildmat.2016.11.029.
  24. Kockal, N.U. (2008), "Effects of lightweight fly ash aggregate properties on the performance of lightweight concretes", Ph.D. Thesis, Bogazici University, Istanbul, Turkey.
  25. Kockal, N.U. and Ozturan, T. (2010), "Effects of lightweight fly ash aggregate properties on the behavior of lightweight concretes", J. Hazard. Mater., 179(1-3), 954-965. https://doi.org/10.1016/j.jhazmat.2010.03.098.
  26. Kockal, N.U. and Ozturan, T. (2011), "Characteristics of lightweight fly ash aggregates produced with different binders and heat treatments", Cement Concrete Compos., 33(1), 61-67. https://doi.org/10.1016/j.cemconcomp.2010.09.007.
  27. Kockal, N.U. and Ozturan, T. (2011), "Durability of lightweight concretes with lightweight fly ash aggregates", Constr. Build. Mater., 25(3), 1430-1438. https://doi.org/10.1016/j.conbuildmat.2010.09.022.
  28. Kockal, N.U. and Ozturan, T. (2011), "Strength and elastic properties of structural lightweight concretes", Mater. Des., 32(4), 2396-2403. https://doi.org/10.1016/j.matdes.2010.12.053.
  29. Kurtoglu, A.E., Alzeebaree, R., Aljumaili, O., Nis, A., Gulsan, M. E., Humur, G. and Cevik, A. (2018), "Mechanical and durability properties of fly ash and slag based geopolymer concrete", Adv. Concrete Constr., 6(4), 345-362. https://doi.org/10.12989/acc.2018.6.4.345.
  30. Lo, T.Y. and Cui, H.Z. (2004), "Properties of green lightweight aggregate concrete", International Workshop on Sustainable Development and Concrete Technology, Beijing, 113.
  31. Lo, T.Y., Tang, W.C. and Cui, H.Z. (2007), "The effects of aggregate properties on lightweight concrete", Build. Environ., 42, 3025-3029. https://doi.org/10.1016/j.buildenv.2005.06.031.
  32. Manikandan, R. and Ramamurthy, K. (2008), "Effect of curing method on characteristics of cold-bonded fly ash aggregates", Cement Concrete Compos., 30(9), 848-853. https://doi.org/10.1016/j.cemconcomp.2008.06.006.
  33. Priyadharshini, P., Mohan Ganesh, G. and Santhi, A.S. (2011), "Experimental study on cold-bonded fly ash aggregates", Int. J. Civil Struct. Eng., 2(2), 493-501.
  34. Sunil, B.M., Manjunatha, L.S., Ravi, L. and Yaragal, S.C. (2015), "Potential use of mine tailings and fly ash in concrete", Adv. Concrete Constr., 3(1), 55-69. https://doi.org/10.12989/acc.2015.3.1.055.
  35. Thomas, J. and Harilal, B. (2014), "Fresh and hardened properties of concrete containing cold bonded aggregates", Adv. Concrete Constr., 2(2), 77-89. https://doi.org/10.12989/acc.2014.2.2.077.
  36. Topcu, I.B. and Uygunoglu, T. (2007), "Properties of autoclaved lightweight aggregate concrete", Build. Environ., 42, 4108-4116. https://doi.org/10.1016/j.buildenv.2006.11.024.
  37. Torres, M.L. and Garcia-Ruiz, P.A. (2009), "Lightweight pozzolanic materials used in mortars: evaluation of their influence on density, mechanical strength and water absorption", Cement Concrete Compos., 31, 114-119. https://doi.org/10.1016/j.cemconcomp.2008.11.003.
  38. Vali, K.S. and Bala Murugan, S. (2017), "Overview of artificial lightweight aggregates-A review", Int. J. Civil Eng. Technol., 8(6), 360-369.
  39. Vali, K.S. and Bala Murugan, S. (2019), "Effect of water and accelerated curing on impact and compressive strength of artificial aggregates with nano silica", Ukieri Concrete Congress Conference, NIT Jalandhar, India, March.
  40. Vali, K.S. and Bala Murugan, S. (2019), "Impact of nano $SiO_2$ on the properties of cold-bonded artificial aggregates with various binders", Int. J. Technol., 10(5), 897-907. https://doi.org/10.14716/ijtech.v10i5.2590
  41. Vali, K.S. and Bala Murugan, S. (2019), "Utilization of cementitious materials with cold-bonded artificial aggregate in concrete", Int. J. Eng. Adv. Technol., 9(1), 385-388. https://doi.org/10.35940/ijeat.A9376.109119
  42. Vali, K.S. and Rahim, A. (2016), "Mechanical properties of light weight engineered cementitious composites", Int. J. Eng. Technol., 8(6), 2937-2945. 10.21817/ijet/2016/v8i6/160806256.
  43. Wasserman, R. and Bentur, A. (1996), "Interfacial interactions in lightweight aggregate concretes and their influence on the concrete strength", Cement Concrete Compos., 18(1), 67-76. https://doi.org/10.1016/0958-9465(96)00002-9.
  44. Yao, Z.T., Ji, X.S., Sarker, P.K., Tang, J.H., Ge, L.Q., Xia, M.S. and Xi, Y.Q. (2015), "A comprehensive review of the application of coal fly ash", Earth Sci. Rev., 141, 105-121. https://doi.org/10.1016/j.earscirev.2014.11.016.
  45. Yaragal, S.C., Teja, D.C. and Shaffi, M. (2016), "Performance studies on concrete with recycled coarse aggregates", Adv. Concrete Constr., 4(4), 263-281. https://doi.org/10.12989/acc.2017.4.4.263.
  46. Zhang, M.H. and Gjorv, O.E. (1991), "Characteristics of lightweight aggregates for high strength concrete", ACI Mater. J., 88, 150-158.