• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2015.05a
• /
• pp.826-828
• /
• 2015

In this paper, Propose an efficient method that can operate at fixed stations Beam-Steering. Typical Beam-Forming techniques are performed using a delay time between the signal reaching each antenna array. The Beam-Forming method requires a lot of complexity and cost. This paper suggest a Beam-Steering method using a signal-to-noise ratio and a received signal strength. Analyzes the algorithm about proposed method.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.16 no.7
• /
• pp.598-609
• /
• 1991

A generalized expression of radiation intensity from multiple non linear transmission lines is derived from the circuit model of radiation phenomena and the phased array antenna theory, for PC traces having independent signal sources. An adequacy of this proposed analitical method was verified comparing with computer simulation and experimental result for two and three non linear transmission lines feeded by 600 MHz signal.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.7A
• /
• pp.727-732
• /
• 2008

The transmit diversity as well as beamforming can increase the performance of wireless communication systems. It is well known that the requirement for the spacing between the neighboring antennas in transmit diversity and beamforming is contradictive to each other. Therefore it is necessary to find the optimum configuration of multiple antennas for getting the maximum performance under the condition that the total number of antennas at transmitter site and the total power of transmitter are fixed. In this paper, the procedure for finding the optimum configuration of multiple antennas was derived through searching the maximum capacity and BER in the combined system with the transmit diversity (Tx diversity) and beamforming.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.14 no.10
• /
• pp.1060-1070
• /
• 2003

The frequency selective surface for use in Ka/Ku band parabolic antenna of domestic satellite communications is proposed. The frequency selective surface structure consists of the infinite periodic arrays of the triple square loop slot element with narrow width on the honeycomb structure of multi-layered dielectric. The frequency selective surface is fabricated and measured. The good agreement is obtained between theory and experiment. It is demonstrated that the frequency selective surface passes 14/12 GHz band wave while reflecting 30/20 GHz band wave as required.

• Journal of Positioning, Navigation, and Timing
• /
• v.9 no.2
• /
• pp.125-129
• /
• 2020

In this paper, Zero velocity UPdaTe (ZUPT) is implemented on the navigation system of Remotely Piloted Aircraft for GNSS denied environment. RPA's navigation system suffers from lack or loss of satellite signal while maintenance or ground test inside a hangar. Although some of the hangars install GPS repeaters for indoor tests, the anti-jamming equipment with array antenna blocks the repeater signal regarding them as hostile jamming signal. With ZUPT, an aircraft navigation system can be tested free from the divergence of navigation solution without line-of-sight satellites. The designed ZUPT aided centralized Kalman Filter is implemented on the Embedded GPS&INS and simulated with Captive Flight Test data. The simulation result shows stable navigation solution without GNSS updates.

• Proceedings of the IEEK Conference
• /
• 2001.06a
• /
• pp.69-72
• /
• 2001

Blind equalization of transmission channel is important in communication areas and signal processing applications because it does not need training sequence, nor does it require a priori channel information. Recently, Tong et al. proposed solutions for this problem exploit the diversity induced by antenna array or time oversampling, leading to the second order statistics techniques, fur example, subspace method, prediction error method, and so on. The linear prediction error method is perhaps the most attractive in practice due to the insensitive to blind equalizer length mismatch as well as for its simple adaptive filter implementation. Unfortunately, the previous one-step prediction error method is known to be limited in arbitrary delay. In this paper, we induce the optimal delay, and propose the adaptive blind equalizer with multi-step linear prediction using RLS-type algorithm. Simulation results are presented to demonstrate the proposed algorithm and to compare it with existing algorithms.

• Proceedings of the IEEK Conference
• /
• 2001.06a
• /
• pp.317-320
• /
• 2001

Blind adaptive channel identification of communication channels is a problem of important current theoretical and practical concerns. Recently proposed solutions for this problem exploit the diversity induced by antenna array or time oversampling leading to the so-called, second order statistics techniques. And adaptive blind channel identification techniques based on a off-line least-squares approach have been proposed. In this paper, a new approach is proposed that is based on eigenvalue decomposition. And the eigenvector corresponding to the minimum eigenvalue of the covariance matrix of the received signals contains the channel impulse response. And we present a adaptive algorithm to solve this problem. The performance of the proposed technique is evaluated over real measured channel and is compared to existing algorithms.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.26 no.9B
• /
• pp.1189-1195
• /
• 2001

본 연구에서는 수평면에 대해서 양방향성을 갖고 접지면을 향해서 주빔이 25$^{\circ}$의 기울기로 지향하도록 설계된 대칭 SSAIP(Strip, Air, Inverted Patch) 구조의 슬롯 결합 back-to-back 마이크로스트립 위생배열 안테나를 설계, 제작하였다. 이 구조의 안테나는 2-섹터 셀 사이트에서 기지국 또는 중계기의 지향성 안테나에 적용할 수 있으며, 도로 환경에 따라 지향각 25$^{\circ}$를 기준으로 약 $\pm$$10^{\circ}$정도 빔을 틸트할 수 있도록 위상기와 결합된다. 안테나는 공동모델을 이용하여 해석하고 앙상블로 설계한다. IMT-2000의 상.하향 링크 주파수 범위인 1.885~2.2GHz에서 안테나를 측정한 결과 임피던스 대역폭은 약 21%이였으며, $\pm$37$^{\circ}$의 지향각 오차를 보였다.

• Proceedings of the KAIS Fall Conference
• /
• 2008.11a
• /
• pp.274-276
• /
• 2008

본 논문에서는 차량충돌방지 센서용 24GHz 대역 마이크로스트립 구형패치 배열 안테나의 설계 방법을 제안하였다. 안테나는 송신안테나 $1{\times}2$배열, 수신안테나 $1{\times}2$배열로 각각 구성 하였다. 안테나는 충돌방지용 센서회로 뒷면에 설치될 것이며 RO-4003 기판(h=0.5mm, ${\varepsilon}_r$=3.38)을 사용하여 설계하였다. 안테나 이득은 8.5dBi 이상으로 설계 되었다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.6C
• /
• pp.506-515
• /
• 2010

In this paper, we compare and analyze the spectral efficiency of representative adaptive MIMO algorithms in indoor environments. We first briefly investigate the modulation and demodulation schemes of MIMO algorithms to be compared and then implement adaptive algorithms by using BPSK and square QAM schemes up to 256QAM. We finally compare the spectral efficiency of adaptive MIMO algorithms employing (2$\times$2) or (4$\times$4) antenna array through the computer simulation in indoor environments.