• Journal of Korea Multimedia Society
• /
• v.20 no.3
• /
• pp.456-464
• /
• 2017

The epigraphy is a text on metal or a text on stone. The value of epigraphy can be used to identify historical facts of the past. It is a good record to understand the past life and culture. But it is difficult to decode the character of the epigraphy which has been exposed to the outdoor for a long time. In this study, the proposed techniques are consisted of 3 parts: (1)The surface division into information area, non- information area, and undifferentiated area. And then, (2) The selection of points in the non-information area and finding a reference plane with the minimum error. (3) Flattening the points perpendicular to the reference plane and decoding characters on information area. This research contributes to narrow the scope of a particular letter and to read the controversial letters on the Pohang Jungsoengri Silla Stone Monument(Korea's national treasure number 318).

• Journal of Advanced Navigation Technology
• /
• v.11 no.1
• /
• pp.1-8
• /
• 2007

Loran-C of ground transmitting station base that can prevent confusion of country navigation system and give BACK-UP function about electric wave navigation comparing utilization incapability state about GPS(Global Positioning System) infra that user is spreading rapidly over our society whole such as sea/aviation safety, vehicles navigation, minuteness agriculture, minuteness measurement in this treatise practical use of Loran-C navigation propose. Executed ASF(Additional Secondary Phase Factor) production and an application experiment Loran-C by location error improvement way to enhance practical use value. By the result Loran-C in conclusion that can improve location error 100~400m remarkably by 10~65m reach. Also, production extent is latitude when go composition medium and bends cotton at ASF revision table utilization of land area, this smell is judged to be suitable hardness 10 minutes. And notable location error improvement and numeric of GPS BACK-UP function are judged to be possible at a ASF revision table application to Korea Peninsula whole area hereafter.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.40 no.7
• /
• pp.1307-1312
• /
• 2015

The recent adoption of Bluetooth LE technology in smart phones triggered commercial interest in RSSI-based positioning technology. Estimation error in RSSI measurement due to the antenna pattern, multipath fading, environmental noise has to be considered for designing beacon systems. The paper proposes an analysis method and beacon planning rules for a small and isolated indoor service area, based on probabilistic model of RSSI estimation error. As an practically important guide, the beacons have to be installed at the boundary of the service area to minimize the maximum position error, whereas the beacons have to be evenly distributed in the service space to minimize the average estimation error.

• Journal of the Korean Society for Precision Engineering
• /
• v.31 no.6
• /
• pp.477-481
• /
• 2014

Flexible electronics have been to the fore because it is believed that flexibility can add incredible value such as light weight and mobility into the existing electronic devices and create new markets of large-area and low-cost electronics such as wearable eletronics in near future. Offset printing processes are regarded as major candidates for manufacturing the flexible electronics because they can provide the patterning resolution of micron-size effectively in large-area. In view of mechanics, the most important viewpoint in offset printing is how to achieve the synchronized movement of two contact surfaces in order to prevent slip between two contact surfaces and distortion of the blanket surface during ink transfer so that the high-resolution and good-overlay patterns can be printed. In this paper, a novel low-cost measurement method of the synchronization error using the motor control output signals is proposed and the compensation method is presented to minimize the synchronization error.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• v.9 no.2
• /
• pp.459-462
• /
• 2005

In this paper, we investigate the high precision location estimation algorithm in 2.45GHz band RTLS with multiple tags. The location is estimated in LOS environments, 300m ${\times}$ 300m area, and 2D coordinates adopting a TDOA scheme which is not necessitate the transmission time of tags. We evaluate the average estimation error in distance assuming that tags are randomly distributed and the readers(3${\sim}$8) are uniformly(equal space) placed in test area. In results, average estimation error is 3.12m and 1.47m at reader numbers of 4 and 8, respectively. Minimum estimation error is obtained when the accumulated receiving signal from a tag is 3 or 4 regardless of available reader numbers. The error is less than 3m, satisfies the specification of RTLS.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.43 no.12
• /
• pp.1054-1061
• /
• 2015

Navigation accuracy, integrity, and safety of commercial Unmanned Aerial Vehicle (UAV) is becoming crucial as utilization of UAV in commercial applications is expected to increase. Recently, the concept of Local-Area Differential GNSS (LADGNSS) which can provide navigation accuracy and integrity of UAV was proposed. LADGNSS can provide differential corrections and separation distances for precise and safe operation of the UAV. In order to derive separation distances between UAVs, modeling of Flight Technical Error (FTE) is required. In most cases, FTE for civil aircraft has been assumed to be zero-mean normal distribution. However, this assumption can cause overconservatism especially for UAV, because UAV may use control and navigation equipments in wider performance range and follow more diverse path than standard airway for civil aircraft. In this research, flight experiments were carried out to understand the characteristics of FTE distribution. Also, this paper proposes to use Johnson distribution which can better describe heavy-tailed and skewed FTE data. Futhermore, Kolmogorov-Smirnov and Anderson-Darling tests were conducted to evaluate the goodness of fit of Johnson model.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.21 no.3
• /
• pp.269-275
• /
• 2003

The cadastral system which accomplishes the base of national land administration with accuracy of proper data and the cadastral maintenance quickly is agreeing with the actual place in information ages in Inundation. But even in spite of many efforts, various Problems are exposed in accuracy of the data on the cadastral maps and local situation must agree accurately from the process which propels cadastral information systems. Therefore, it must be carried out the cadastral non correspondence arrangement first of all in link of the plan which it corrects the error of existing data and computerization quickly. It summarizes the research as follows ; Cadastral non correspondence of the land boundaries on the map and actual circumstance does not agree with cadastral maps accurately, The lands which exceed the standards with the position error excess of 50cm on lil ,200 and 240cm on 1/6,000 areas on the map scale are the registration correction objectives. It is investigated that the cadastral non correspondence parcels occur in various cause and long period, the area error corrections are mainly objectives, and about 80% of the test area comes to reveal within permitted the limit of the measurement of planimetric area for cadastral survey, so it is not difficult with the fact that the compensation back which it follows in area increase and decrease and the location error correction becomes the important object fer the cadastral non correspondence arrangement projects.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.21 no.1
• /
• pp.177-188
• /
• 2019

The purpose of the optimization of the installation of supply/exhaust ports for tunnels with transverse ventilation system is to supply fresh air from outside to inside of tunnels uniformly and exhaust pollutant from tunnels properly for creating safe and clean environment for tunnel users. For this purpose, a ventilation port area optimization program was developed to obtain a uniform supply or exhaust air volume inside a great depth double deck tunnel with transverse ventilation system. In order to area optimize the developed port sizing program, the wind velocity was measured in the duct of the currently operated tunnel with semi-transverse ventilation. Also 3D cfd was performed on the same tunnel and cfd results were compared to the measured value. As a result, the error rate between the predicted value from the program and measured value was 6.72%, while the error rate between the predicted value from the program and 3D cfd analysis value was 4.86%. Both of comparison results show less than 10% of error rate. Thus It is expected that supply/exhaust port optimization design of transverse ventilation tunnel can be possible with using this large exhaust port area optimization program.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.26 no.4
• /
• pp.52-65
• /
• 1984

In general precise estimation of hourly of daily distribution of the long-term run-off should be very important in a design of source of irrigation. However, there have not been a satisfying method for forecasting of stationar'y long-term run-off in Korea. Solving this problem, this study introduces unit-hydrograph method frequently used in short-term run-off analysis into the long-term run-off analysis, of which model basin was selected to be Sumgin-river catchment area. In the estimation of effective rainfall, conventional method neglects the Soil moisture condition of catchment area, but in this study, the initial discharge (qb) occurred just before rising phase of the hydrograph was selected as the index of a basin soil moisture condition and then introduced as 3rd variable in the analysis of the reationship between cumulative rainfall and cumulative loss of rainfall, which built a new type of separation method of effective rainfall. In next step, in order to normalize significant potential error included in hydrological data, especially in vast catchment area, Snyder's correlation method was applied. A key to solution in this study is multiple correlation method or multiple regressional analysis, which is primarily based on the method of least squres and which is solved by the form of systems of linear equations. And for verification of the change of characteristics of unit hydrograph according to the variation of a various kind of hydrological charateristics (for example, precipitation, tree cover, soil condition, etc),seasonal unit hydrograph models of dry season(autumn, winter), semi-dry season (spring), rainy season (summer) were made respectively. The results obtained in this study were summarized as follows; 1.During the test period of 1966-1971, effective rainfall was estimated for the total 114 run-off hydrograph. From this estimation results, relative error of estimation to the ovservation value was 6%, -which is mush smaller than 12% of the error of conventional method. 2.During the test period, daily distribution of long-term run-off discharge was estimated by the unit hydrograph model. From this estimation results, relative error of estimation by the application of standard unit hydrograph model was 12%. When estimating by each seasonal unit bydrograph model, the relative error was 14% during dry season 10% during semi-dry season and 7% during rainy season, which is much smaller than 37% of conventional method. Summing up the analysis results obtained above, it is convinced that qb-index method of this study for the estimation of effective rainfall be preciser than any other method developed before. Because even recently no method has been developed for the estimation of daily distribution of long-term run-off dicharge, therefore estimation value by unit hydrograph model was only compared with that due to kaziyama method which estimates monthly run-off discharge. However this method due to this study turns out to have high accuracy. If specially mentioned from the results of this study, there is no need to use each seasonal unit hydrograph model separately except the case of semi-dry season. The author hopes to analyze the latter case in future sudies.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.57 no.1
• /
• pp.128-136
• /
• 2008

In this paper, we propose a new cache structure for effective error correction of soft error. We added check bit and SEEB(soft error evaluation block) to evaluate the status of cache line. The SEEB stores result of parity check into the two-bit shit register and set the check bit to '1' when parity check fails twice in the same cache line. In this case the line where parity check fails twice is treated as a vulnerable to soft error. When the data is filled into the cache, the new replacement algorithm is suggested that it can only use the valid block determined by SEEB. This structure prohibits the vulnerable line from being used and contributes to efficient use of cache by the reuse of line where parity check fails only once can be reused. We tried to minimize the side effect of the proposed cache and the experimental results, using SPEC2000 benchmark, showed 3% degradation in hit rate, 15% timing overhead because of parity logic and 2.7% area overhead. But it can be considered as trivial for SEEB because almost tolerant design inevitably adopt this parity method even if there are some overhead. And if only parity logic is used then it can have $5%{\sim}10%$ advantage than ECC logic. By using this proposed cache, the system will be protected from the threat of soft error in cache and the hit rate can be maintained to the level without soft error in the cache.