• Laser Solutions
• /
• v.10 no.1
• /
• pp.29-34
• /
• 2007

We propose a novel application of laser engraving to patterning of light guide panel (LGP) for backlight. The feasibility of three-dimensional engraved pattern in the LGP was verified by measuring brightness and uniformity. To improve the overall uniformity, we have modified proposed patterns and found improved design for patterns. The tailoring of pattern by using laser engraving method could endow the controllability of uniformity. The proposed LGPs are more efficient in both average brightness and uniformity of illumination than the conventional LGPs which have surface pattern on the panel.

• Tribology and Lubricants
• /
• v.34 no.1
• /
• pp.16-22
• /
• 2018

Cylindrical turbine guide bearings (TGBs) with simple plain pads have conventionally been used in vertical hydro-power turbine-generator applications in order to provide turbine runner shafts with smooth rotation guides and supports. To overcome low-load/low-eccentricity performance drawbacks, such as very low film stiffness and lack of design credibility in the stiffness values themselves, of conventional cylindrical TGBs, the introduction of a rotational-directional leading-edge taper to each partitioned pad, simply pad leading-edge taper, has been found to be very effective in enhancing their design-application availability and usefulness. In this study, we investigate the effects of taper angle and length for given taper heights in detail in order to systematically establish the effectiveness of design on the performance improvement of vertical hydro-power application cylindrical TGBs with pad leading-edge tapers. The analysis results with $4-Pad{\times}1-Row$ cylindrical TGBs show that the lubrication performance of the cylindrical TGBs is optimized with an approximate taper angle ratio of 0.8 and taper length ratio of 0.9. We conclude that the introduction of pad leading-edge tapers along with the optimization of taper designs can be very effective in improving the overall operation reliability of cylindrical TGBs and the rotordynamic characteristics of vertical hydro-power turbine-generator rotor-bearing systems as well, to which the TGBs are applied.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2002.10a
• /
• pp.147-150
• /
• 2002

A light guide panel is an element of the LCD backlight module that is often used for the display of compact electronic devices. In this study, a laser marking system is proposed to fabricate light guide panel, which can be replaced of other manufacturing methods such as silk printing, stamping, and v-cutting methods. The objectives of this research are the establishment of laser marking system, evaluation of laser marking parameters, understanding marking process, application to PMMA, reliability test and quality inspection. A 50W $CO_2$ laser (CW) was used to perform different experiments in which, the influence of some processing parameters (average power, scanning speed) on the geometry and quality of groove pattern was studied. The width of the etched grooves increases with increasing a laser power and decreasing a scan speed. In order to analyze surface characteristics and optical properties (luminance, uniformity), SEM photography and BM7 (luminance measuring system) were used. As a result, the optimal conditions of the process parameters were determined.

• Journal of the Korea Institute of Building Construction
• /
• v.9 no.3
• /
• pp.65-71
• /
• 2009

General criteria for the quality of porous concrete have not been established yet in Korea. And yet, pavement and construction have been performed. In this paper, guidelines on the construction site quality control of porous concrete were developed in order to establish criteria for resolving the issues and problems of porous concrete, to establish methods for improving poor performance, and to manage porous concrete more systematically. In addition, a guide for the construction site quality control of porous concrete, which was appropriate for reality, was developed by researching several quality control guides and maintenance at construction sites. The guide consists of a total of nine chapters such as Application Range, Overview, the Structure of Porous Concrete, the Design of Package Thickness, Package Materials for Porous Concrete, Construction Methods, Quality Assurance and Inspections, Construction Site Quality Control, and Maintenance. It describes quality control guidelines in all steps such as methods for transporting porous concrete from the factory to the construction site, cautions for construction work at construction sites, maintenance, and management. The Guide for the Construction Site Quality Control of Porous Concrete is expected to ensure the quality of porous concrete, to reduce national costs for quality assurance, and to help ensure the health and safety of Korean people.

• Journal of Korean Elementary Science Education
• /
• v.37 no.3
• /
• pp.233-253
• /
• 2018

Since open inquiry of science was formally introduced at the 2007 Revised Science Curriculum Course, the purpose and effect of it has been positively evaluated, and it is underlined continuously until the revised science education course in 2015. However, through many previous studies, there is still a lack of awareness of open inquiry of both students and teachers in the field, and it was revealed they are continually appealing confusion and difficulties. Therefore, in this research, we analyzed the causes that make it difficult to execute open inquiry, and developed differentiated open inquiry guide materials that can contribute to the realization of teachers and students. They were developed by the brain-based evolutionary approach to provide students with authentic science. The brain-based evolutionary approach is reflecting the evolutionary attributes and the brain functions associated activities of scientists. It was revealed that, in the same way as the pilot test results, the usefulness of the differentiated guide materials were very high, and there was a statistically significant difference in the science attitude. It was found that the application of the brain-based evolutionary approach had positively influenced the stage of determining the inquiry themes, and self-confidence that could be able to do as a scientist. Analysis of top and sub group types on the basis of inquiry ability showed that both groups are improved at science attitude by the differentiated guide materials. There was a positive effect on change in the self-perception of scientific creativity. We were able to see a positive change in the post survey for open inquiry-efficacy. The developed differentiated open inquiry guide materials contributed to the improvement of open inquiry-efficacy for both the teacher and student.

• Journal of Service Research and Studies
• /
• v.4 no.2
• /
• pp.49-56
• /
• 2014

Lately, We have experienced increasing of Smartphone. Therefore we have experienced increasing of Application for Smartphone. This study suggested Tour Management Application using the smartphone. When you travel, you need various information This study of Development for Application provide that guide of travel destination provide means of transportation, time of travel, traveling expensives management. This application will use conveniently This application provide various information of travel and this application will use tool of new mobile business.

• Journal of the Korean Society of School Health
• /
• v.23 no.2
• /
• pp.97-114
• /
• 2010

Purpose: This study is intended to provide easy explanations needed to ensure correct understanding of the notification of health education curriculum revised in 2008, health education curriculum at middle and high schools as well as their effective application at schools. Teachers of health lessons can provide better guidance for their classes only when they are well informed of intent and direction of health lessons sought after by the nation, objective and systematic content of health lessons, teaching methods, characteristics of teachinglearning materials and their evaluation. The contents of the guide have been sufficiently detailed and clarified in such a way that can increase understanding of school health education as pursued by the nation. Methods: This is reported research as its contents have been finalized through analysis of documentary records concerned with health education available at both home and abroad, a council of health education experts and public hearings organized for extensive collection of opinions from professor and teachers. Results: The guidebook has been prepared in 5 areas covering respectively "background of revision to health education curriculum", "how health education curriculum has been changed over time", " focus on health education curriculum", "explanations on health education curriculum" and "comparison of new and previous curriculum". Also developed were key initiatives on 6 health related subjects. Conclusion: The greatest significance of this research lies in the fact that it has come up with the first guide book for health education ever prepared in our history. It is also meaningful for the guide book to enable teachers to teach their classes better by providing them with easy interpretation of the contents notified by the government and to have set guidelines for directions in which health of our youths should be promoted. Since this is the first work, continuous research and development should further be carried out in the future.

• The Journal of Korean Academy of Prosthodontics
• /
• v.53 no.3
• /
• pp.244-249
• /
• 2015

With the recent progress of digital technology, the computer guided surgery utilizing a guide template in the placement of implant has been actively performed, and the method employing the intraoral scanner at the implant prosthesis introduced. Fabrication method of the guide template can be largely classified into design-related rapid prototyping (RP) system and vector milling system, and each of the method has its own weakness in the clinical application despite of excellent accuracy. Thus, in this case study, a working model was fabricated by the wax RP technology using images acquired by CBCT and an intraoral scanner, and the metal bushing was picked up with orthodontic resin cast upon the wax model. Using this method, a surgical guide template was fabricated and used in surgery. From this, we could obtain a satisfactory outcome clinically in the implant placement and the fabrication of the final prostheses and thus report this case herein.

• Journal of Physiology & Pathology in Korean Medicine
• /
• v.21 no.3
• /
• pp.596-604
• /
• 2007

For countless time, many have been made in our oriental medicine. To understand such prescription and to use, we must study the monarch(jun), minister(chen), adjuvant(zou) and guide(shi) theory that is most of the prescription structure principle's the basis. The monarch is the center of the prescription. Two kind is greatly in the method to select the monarch, in the prescription. One method is that a medicinal herb of the high class of medical herb of the Sinnong's Classic becomes the monarch, and the other method is a medicinal herbs which there is most many qunantity in the prescription becomes the monarch. Additionally, a medicinal herbs name of a prescription name can become the monarch. The minister assist the monarch and this is a criteria of the prescription grouping with the monarch. The minister has close relation with the monarch. The adjuvant helps the monarch and the minister nature of drug or restains. So this makes the prescription effectiveness act accurately. The guide does the activity to help the harmony of the prescription and the activity to help the prescription to act in correct place. If we understand the monarch, minister, adjuvant and guide theory well, we have some advantage. The interpreting of the prescription comes to De easy. and, an application range of the prescription is enhanced. the increase and decrease of the medicinal herbs comes to be easy in the prescription. Finally that theory will be used for the principle to make new prescription.

• Proceedings of the Safety Management and Science Conference
• /
• 2006.04a
• /
• pp.525-544
• /
• 2006

This paper is to introduce guidelines for project quality management system. International standards such as ISO 10006, IEC 62198, ISO/IEC TR 16326 and ISO 15188 are considered. This study is to discuss guidelines for quality management in projects, and application guidelines for project risk management, and guide for the application of ISO/IEC 12207 to software project management, and project management guidelines for terminology standardization.