• Journal of Engineering Education Research
• /
• v.9 no.1
• /
• pp.20-31
• /
• 2006

To enhance the competitiveness of the engineering college through cultivating market-oriented engineering students and to overcome the current 'science/engineering evasion' phenomena, this study proposes an engineering-management course and a strategy for its design and operation. Management ability and leadership is now a necessity for engineering students who will lead the society with their innovative science technology, yet such capacities can only be enhanced by providing a well organized engineering-management program. This study intends to introduce and propose development plans for Yonsei University College of Engineering's 'Techno-Yonsei' undergraduate engineering-management program. CEO's with an engineering background are increasing and in a society where cutting-edge technology is regarded as an invaluable asset, and where development and application of such technology is recognized as the key to securing competitiveness, the roles of 'engineering minded' CEO's are becoming indispensable. This study is significant in that it presents both the need and solution for a market-oriented engineering-management program in accordance to the social demands.

• Journal of KIISE:Computing Practices and Letters
• /
• v.9 no.6
• /
• pp.699-711
• /
• 2003

Home networking and Internet control technologies must satisfy three requirements with a view to being applied to home for raising the qualify of human life. Firstly, the cost of adding home networking ability to the traditional appliance must be minimized. Secondly, the mutual accessibility between home network and Internet must be guaranteed in the various Internet service environment of home. Finally, communication must be possible between the home network and the Internet that use different communications protocols. This paper proposes the ARCS (Appliance Remote Control System) that controls appliances based on LnCP (Living network Control Protocol) via the Internet. LnCP is the most cost-effective network and control protocol for home network. ARCS guarantees the accessibility from the Internet to home network and provides users with the virtual interface designed for controlling appliances using the Internet application program. In addition, this paper proposes AICS (Appliance Internet Control Specification). AICS, is based on LnCP, defines the message structure and control commands for the Internet control communication. ARCS and home gateway are developed to meet AICS.

• Restorative Dentistry and Endodontics
• /
• v.36 no.5
• /
• pp.385-396
• /
• 2011

Objectives: This study evaluated the effects of adhesion variables such as the priming concepts of canal wall and the curing modes of adhesives on the sealing ability of a resin-based root canal filling system. Materials and Methods: Apical microleakage of the Resilon-RealSeal systems filled with 3 different combinations of adhesion variables was compared with the conventional gutta-percha filling using a dye penetration method. Experimental groups were SEDC, Resilon (Resilon Research LLC) filling with self-etch RealSeal (SybronEndo) primer and dual-cure RealSeal sealer; NELC, Resilon filling with no etching, Scotchbond Multi-Purpose (3M ESPE) primer application and light-curing adhesive; and TELC, Resilon filling with Scotchbond Multi-Purpose primer and adhesive used under total etch / wet bonding and lightcure protocols. GPCS, gutta-percha filling with conventional AH26 plus sealer, was the control group. Results: The median longitudinal dye penetration length of TELC was significantly shorter than those of GPCS and SEDC (Kruskal-Wallis test, p < 0.05). In the cross-sectional microleakage scores, TELC showed significant differences from other groups at 2 to 5 mm from the apical foramen (Kruskal-Wallis test, p < 0.05). Conclusions: When a resin-based root canal filling material was used, compared to the self-etching primer and the dual-cure sealer, the total etch/wet-bonding with primer and light-curing of adhesive showed improved apical sealing and was highly recommended.

• Economic and Environmental Geology
• /
• v.53 no.3
• /
• pp.321-336
• /
• 2020

The Headquarters for Earthquake Research Promotion (HERP) represents the upper-most level of Japan's earthquake disaster prevention governance. Its policy committee establishes the national earthquake investigation research promotion plan. The earthquake investigation committee of HERP collects survey geo-data and evaluates the research results of each earthquake disaster prevention agency. The establishment of an earthquake-related geo-resilience research strategy is both necessary and desirable for Korea. The concept of geo-resilience entails the ability to improve disaster resilience through the application of research results and the convergence of geoscience with science and technology (S&T) including the humanities and social sciences. The achievement of geo-resilience requires a national long-term roadmap and strategy for earthquake prediction research, the development of earthquake disaster prediction and prevention technology, Geo-ICT convergence technology development, implementation of a geocyber physics system (Geo-CPS), the use of geo-mimetics, and geoscientific R&D as it relates to local communities. Through such efforts, the national research institutes of Korea will be able to develop earthquake prediction capacities in relevant fields, reinforce proactive response capabilities, enhance community-level confidence in geodata and its research results, foster next-generation geoscientific manpower, and expand geoscientific infrastructure.

• Journal of Educational Research in Mathematics
• /
• v.25 no.1
• /
• pp.95-111
• /
• 2015

The purpose of this study is to analyze cases on teaching solutions exploration of Wythoff's game through using the analogy for the gifted elementary students, to suggest useful teaching methods. Students recognized structural similarity among problems on the basis of relevance of conditions of problems. The discovery of structural similarity improves the ability to solve problems. Although 2 groups-NIM game with surface similarity is not helpful in solving Wythoff's game, Queen's move game with structural similarity makes it easier for students to solve Wythoff's game. Useful teaching methods to find solutions of Wythoff's game through using the analogy are as follow. Encoding process helps students make sense of the game. It is significant to help students realize how many stones are remained and how the location of Queen can be expressed by the ordered pair. Inferring process helps students find a solution of 2 groups-NIM game and Queen's move game. It is necessary to find a winning strategy through reversely solving method. Mapping process helps students discover surface similarity and structural similarity through identifying commonalities between the two games. It is crucial to recognize the relationship among the two games based on the teaching in the Encoding process. Application process encourages students to find a solution of Wythoff's game. It is more important to find a solution by using the structural similarity of the Queen's move game rather than reversely solving method.

• Applied Chemistry for Engineering
• /
• v.27 no.5
• /
• pp.502-507
• /
• 2016

This study was conducted to develop novel antimicrobial nano-composites, with the aim of fully utilizing antimicrobial properties of multi-walled carbon nanotubes (MWCNTs), nickel (Ni) and zinc oxide (ZnO). Ni coated-MWCNTs (Ni-CNT) were prepared and evaluated for their potential application as an antimicrobial material for inactivating bacteria. Field emission scanning electron microscopy (FE-SEM), and X-ray energy dispersive spectroscopy (EDS) were used to characterize the Ni coating and morphology of Ni-CNT. Staphylococcus aureus (S. aureus) and Escherichia coil (E. coil) were employed as the target bacterium on antimicrobial activities. Comparing with the nitric acid treated MWCNTs and Ni-CNT which have been previously reported to possess antimicrobial activity towards S. aureus and E. coil, Ni-CNT/ZnO exhibited a stronger antimicrobial ability. The nickel coating was confirmed to play an important role in the bactericidal action of Ni-CNTs/ZnO composites. Also, the addition of ZnO to the developed nanocomposite is suggested to improve the antimicrobial property.

• Korean Journal of Food Science and Technology
• /
• v.31 no.2
• /
• pp.285-292
• /
• 1999

An analytical method applicable to quality control and its optimum conditions were studied for rapid and efficient analysis of sorbic and benzoic acids used as preservatives in the commercial soybean paste. In gas chromatographic analysis of sorbic and benzoic acids, the application of HP-FFAP (acid modified polyethylene) wide bore column improved the separation ability significantly. By setting the oven temperature of GC to $200^{\circ}C$, the total elapsed time for quantitative analysis was also reduced to the level required in using packed column. By extracting sorbic and benzoic acids from soybean paste with an automatic steam distillation device, the elapsed time for analysis was reduced by 80% more compared to using conventional steam distillation method. The recoveries of sorbic and benzoic acids by the automatic steam distillation were 98.1% and 99.9%, respectively. The sorbic acid was found in 3 samples of 14 commercial soybean pastes, of which contents were $466{\sim}530ppm$, while $0.3{\sim}4.4ppm$ of benzoic acid was found in all the samples.

• Journal of Construction Engineering and Project Management
• /
• v.5 no.2
• /
• pp.11-15
• /
• 2015

The Last PlannerSystem (LPS) has been implemented on construction projects to increase work flow reliability, a precondition for project performance againstproductivity and progress targets. The LPS encompasses four tiers of planning processes:master scheduling, phase scheduling, lookahead planning, and commitment / weeklywork planning. This research highlights deficiencies in the current implementation of LPS including poor lookahead planning which results in poor linkage between weeklywork plans and the master schedule. This poor linkage undetermines the ability of theweekly work planning process to select for execution tasks that are critical to projectsuccess. As a result, percent plan complete (PPC) becomes a weak indicator of project progress. The purpose of this research is to improve lookahead planning (the bridgebetween weekly work planning and master scheduling), improve PPC, and improve theselection of tasks that are critical to project success by increasing the link betweenShould, Can, Will, and Did (components of the LPS), thereby rendering PPC a betterindicator of project progress. The research employs the case study research method to describe deficiencies inthe current implementation of the LPS and suggest guidelines for a better application ofLPS in general and lookahead planning in particular. It then introduces an analyticalsimulation model to analyze the lookahead planning process. This is done by examining the impact on PPC of increasing two lookahead planning performance metrics: tasksanticipated (TA) and tasks made ready (TMR). Finally, the research investigates theimportance of the lookahead planning functions: identification and removal ofconstraints, task breakdown, and operations design.The research findings confirm the positive impact of improving lookaheadplanning (i.e., TA and TMR) on PPC. It also recognizes the need to perform lookaheadplanning differently for three types of work involving different levels of uncertainty:stable work, medium uncertainty work, and highly emergent work.The research confirms the LPS rules for practice and specifically the need to planin greater detail as time gets closer to performing the work. It highlights the role of LPSas a production system that incorporates deliberate planning (predetermined andoptimized) and situated planning (flexible and adaptive). Finally, the research presents recommendations for production planningimprovements in three areas: process related, (suggesting guidelines for practice),technical, (highlighting issues with current software programs and advocating theinclusion of collaborative planning capability), and organizational improvements(suggesting transitional steps when applying the LPS).

• Korean Journal of Social Welfare
• /
• v.62 no.1
• /
• pp.155-183
• /
• 2010

Despite the increase in the demands on collaboration between health and social welfare, the success of such schemes have been limited. The extant literatures tends to be dominated by explanations for needs or short-term outcomes of collaboration rather than systematic follow-up research to apply to the frontline. At the same time, there is no attempt to apply the theories related to collaboration in order to discuss the situation. This study explores the factors hindering such collaborative working in the frontline, through semi-structured interviews with practitioners involved in two pilot projects. A theoretical framework (Equilibrium Model-Sensemaking, E-S model) which combined Equilibrium Model of 'Interorganizational Network' of Benson(1975) and 'Sensmaking' of Weick(1995) for conceptualiing aspects of collaborations such as working atmosphere and agency was applied to the empirical study of the Public Health and Welfare Office(1995-1999) and the Social Welfare office(2004-2006) pilot projects. Data were collected over three months from 8 pilot project areas with practitioners and managers from health and social welfare. The findings show significant regional differences between pilot areas, such as the presence of active leaders and co-location, had a major impact on the ability of practitioners to effectively integrate services. In other words, active leaders tended to influence practitioners' motivation, while co-location encouraging communication between both practitioners, and thus seemed to influence the practices of collaborative working. Furthermore, through E-S model, it is interpreted that this kind of positive experiences about collaborations may impact on the current practitioners' comprehensive perspective towards health and social welfare services in general. The findings could help policy makers consider the practical ways to break down the barriers between health and social welfare.

• Clinical and Experimental Reproductive Medicine
• /
• v.25 no.2
• /
• pp.123-128
• /
• 1998

Implantation rates remain low following human in vitro fertilization (IVF). Suboptimal culture conditions may limit the ability of embryos to hatch as blastocysts, and artificial opening of the zona pellucida has been proposed as a means to promote subsequent hatching (assisted hatching). In this study, assisted hatching (AH) by zona drilling using acidic Tyrode's solution was performed in 320 patients, due to their age of more than 38 years (group A), the thick zona pellucida (group Z; $ZP\geq0.18{\mu}m$), and failures in implantation more than 3 times in previous IVF-ET trial (group P). This study was designed firstly, to study the effects of AH on the outcomes of IVF-ET according to the indications and secondly, to verify the appropriate application of AH. The results were as follows; 1. There was no difference in pregnancy rate between AH group (26.6%) and non-AH group (26.5%). 2. Assisted hatching (AH) showed significantly higher pregnancy rate of the patients with thick zona pellucid a than those of the patients with age factor and with the history of repeated implantation failure. But in the patients with age factor only, AH resulted in higher pregnancy rate. 3. Interestingly, the patients with complex factors including zona factor (Z: 33.9%; ZA: 30.4%; ZP: 31.6%; ZAP: 21.4%) showed higher pregnancy rates than other complex factors excluding zona factor (A: 24.4%, P: 0%; AP: 10.8%). From these results, AH is more helpful to the patients with thick zona pellucida rather than patients with older age and/or previous repeated implantation failure.