• Korean Journal of Materials Research
• /
• v.25 no.12
• /
• pp.719-726
• /
• 2015

For a decade, solution-processed functional materials and various printing technologies have attracted increasingly the significant interest in realizing low-cost flexible electronics. In this study, Cu nanoparticles are synthesized via the chemical reduction of Cu ions under inert atmosphere. To prevent interparticle agglomeration and surface oxidation, oleic acid is incorporated as a surface capping molecule and hydrazine is used as a reducing agent. To endow water-compatibility, the surface of synthesized Cu nanoparticles is modified by a mixture of carboxyl-terminated anionic polyelectrolyte and polyoxylethylene oleylamine ether. For reducing the surface tension and the evaporation rate of aqueous Cu nanoparticle inks, the solvent composition of Cu nanoparticle ink is designed as DI water:2-methoxy ethanol:glycerol:ethylene glycol = 50:20:5:25 wt%. The effects of poly(styrene-co-maleic acid) as an adhesion promoter(AP) on rheology of aqueous Cu nanoparticle inks and adhesion of Cu pattern printed on polyimid films are investigated. The 40 wt% aqueous Cu nanoparticle inks with 0.5 wt% of Poly(styrene-co-maleic acid) show the "Newtonian flow" and has a low viscosity under $10mPa{\cdots}S$, which is applicable to inkjet printing. The Cu patterns with a linewidth of $50{\sim}60{\mu}m$ are successfully fabricated. With the addition of Poly(styrene-co-maleic acid), the adhesion of printed Cu patterns on polyimid films is superior to those of patterns prepared from Poly(styrene-co-maleic acid)-free inks. The resistivities of Cu films are measured to be $10{\sim}15{\mu}{\Omega}{\cdot}cm$ at annealing temperature of $300^{\circ}C$.

• Membrane Journal
• /
• v.18 no.1
• /
• pp.7-25
• /
• 2008

Sodium dodecyl sulfate, which was anionic surfactant, at a concentration higher than its critical micellar concentration was added to calcium solution for forming micelles. Then aggregates were formed by adsorption or binding of calcium ions on the surface of micelles, and gathering between them, and then rejected by two kinds of ceramic membranes to remove calcium ions. As result, rejection rates of calcium were higher than 99.98%. And in our experimental range the higher TMP trended to increase the resistance of membrane fouling ($R_f$), total permeate volume ($V_T$), dimensionless permeate flux ($J/J_o$) and permeate flux (J) because TMP was driving force. And we investigated effects of $N_2$-back-flushing time and filtration time, that was back-flushing period, during periodic $N_2$-back-flushing on ceramic membranes. As result, optimal BTs for NCMT-623l ($0.07{\mu}m$ pore size) and NCMT-7231 membrane ($0.10{\mu}m$) were 10 sec and 15 sec, respectively. Also, optimal FT was 5 min for both membranes, and the frequent $N_2$-back-flushing could decrease membrane fouling effectively. Then, the optimal conditions resulting from our experiments for synthetic calcium solution were applied to groundwater using as washing process of soymilk package. As result, rejection rates of calcium were higher than 99.98%.

• KSBB Journal
• /
• v.27 no.6
• /
• pp.352-360
• /
• 2012

Bacillus clausii I-52 which produced SDS- and $H_2O_2$-tolerant extracellular alkaline protease (BCAP) was isolated from heavily polluted tidal mud flat of West Sea in Incheon, Korea and stable strain (transformant C5) of B. clausii I-52 harboring another copy of BCAP gene in the chromosome was developed using the chromosome integration vector, pHPS9-fuBCAP. When investigated the production of BCAP using B. clausii transformant C5 through pilot-scale submerged fermentation (500 L) at $37^{\circ}C$ for 30 h with an aeration rate of 1 vvm and agitation rate of 250 rpm, protease yield of approximately 105,700 U/mL was achieved using an optimized medium (soybean meal 2%, wheat flour 1%, sodium citrate 0.5%, $K_2HPO_4$ 0.4%, $Na_2HPO_4$ 0.1%, NaCl 0.4%, $MgSO_4{\cdot}7H_2O$ 0.01%, $FeSO_4{\cdot}7H_2O$ 0.05%, liquid maltose 2.5%, $Na_2CO_3$ 0.6%). The enzyme stability of BCAP was increased by addition of polyols (10%, v/v) and also, the stabilities of BCAP towards not only the thermal-induced inactivation at $50^{\circ}C$ but also the SDS and $H_2O_2$-induced inactivation at $50^{\circ}C$ were enhanced. Among the polyols examined, the best result was obtained with propylene glycol (10%, v/v). The BCAP supplemented with propylene glycol exhibited extreme stability against not only the detergent components such as ${\alpha}$-orephin sulfonate (AOS) and zeolite but also the commercial detergent preparations. The granulized enzyme of BCAP was prepared with approximately 1,310,000 U/g of granule. Wash performance analysis using EMPA test fabrics revealed that BCAP granule exhibited high efficiency for removal of protein stains in the presence of anionic surfactants as well as bleaching agents. When compared to Savinase 6T$^{(R)}$ and Everlase 6T$^{(R)}$ manufactured by Novozymes, BCAP under this study probably showed similar or higher efficiency for the removal of protein stains. These results suggest that the alkaline protease produced from B. clausii transformant C5 showing high stability against detergents and high wash performance has significant potential and a promising candidate for use as a detergent additive.

• Korean Chemical Engineering Research
• /
• v.47 no.1
• /
• pp.31-37
• /
• 2009

A zwitterionic surfactant shows not only detergency but also mildness effect since it shows characteristics of a nonionic or an anionic surfactant above an isoelectric point, while showing characteristics of a cationic surfactant below an isoelectric point. Therefore, a zwitterionic surfactant can serve as a dual function surfactant by a single molecule through the interconversion of cleaning and softening effects depending on pH variations of the aqueous solution. In this study, physical properties of betaine surfactant such as CMC, surface tension, interfacial tension, contact angle and viscosity were measured and phase behavior study was performed. Also dual function characteristics of betaine zwitterionic surfactant were investigated by measuring an isoelectric point using QCM(quartz crystal microbalance) and zeta potential measurement. The CMC of betaine surfactant was near $10^{-4}mol/L$ and the surface tension at CMC was about 32 mN/m. The interfacial tension between 1 wt% aqueous solution and n-decane measured by spinning drop tensiometer at pH 2~10 resulted in an increase in interfacial tension until pH 5 and a decrease with pH after 5 and equilibration time showed the similar trend with an increase in pH. The isoelectric point of betaine surfactant measured by QCM experiment was found to exist between 3.0 and 3.3, which is the same as the result determined by zeta potential measurement.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.31 no.4B
• /
• pp.377-382
• /
• 2011

In this study, hydrogen peroxide is stabilized in modified Fenton reaction to improve the soil remediation. Phenanthrene, which is the typical compound in PAHs, was spiked into soil samples to copy the original contaminated site. Anionic surfactant, SDS (Sodium dodecyl sulfate) was used for hydrogen peroxide stabilizer. 4 mM of Fe(II), 5~50 mM of SDS and 102.897 mM of $H_2O_2$ was injected into soil samples which is contaminated by 125 mg/kg of phenanthrene to analyze decomposition rate of phenanthrene in modified Fenton reaction. In condition which SDS was injected 30 mM, decomposition rate of phenanthrene has best efficiency as 95% and in condition which SDS was injected over 30 mM, decomposition rate is lower than SDS 30 mM because SDS enacted as scavenger in the system. Results which assess the change of hydrogen peroxide concentration after injecting hydrogen peroxide stabilizer showed that hydrogen peroxide concentration was 14.6995 mM so that is stabilized at Fe(II) 2 mM condition in 48 hours. On the other hand, hydrogen peroxide is not stable in Fe(III) condition. SDS concentration was fixed and iron concentration was changed 2~8 mM to find out optimize proportion between iron concentration and SDS concentration in modified Fenton reaction. Consequentially, in condition of which Fe(II) 4 mM and SDS 30 mM, reaction has the highest removal rate as 95%.

• Journal of Korean Society of Environmental Engineers
• /
• v.32 no.11
• /
• pp.1024-1029
• /
• 2010

Use of polymeric soil amendments is an emerging way to reduce soil erosion, and improve crop productivity and soil quality. Objective of this study was to evaluate the effects of anionic polyacrylamide (PAM) and synthetic biopolymer on soil erosion, crop growth and soil quality. The aqueous solutions of PAM and biopolymer at 40 kg/ha were applied to loamy soil plots (3 m width by 18 m long) having a 20% slope during radish (Raphanus sativus) cultivation. Results showed that PAM and biopolymer treatments increased aggregate stability up to 11% compared to the untreated control. Treatments of PAM and biopolymer also increased leaf length of radish but there was no significant difference in crop yield. Soil loss was decreased by up to 41% using the polymeric soil amendments; however, no difference in runoff was found, compared to the untreated control. Soil loss was logarithmically increased against an increase in rainfall intensity ($R^2=0.85$). Our findings suggest that proper use of polymeric soil amendments would be beneficial to maintain soil quality and reduce soil erosion in sloping uplands.

• Journal of Veterinary Clinics
• /
• v.27 no.3
• /
• pp.262-267
• /
• 2010

Magnesium ($Mg^{2+}$) is an essential co-factor for over 325 physiological and biochemical processes so that plays a central role of neuronal activity, cardiac excitability, neuromuscular transmission, muscular contraction, vasomotor tone, and blood pressure significantly related to physical performance. However, only limited information on blood ionized $Mg^{2+}$ ($iMg^{2+}$) regarding to physical exercise is available and the data from blood total $Mg^{2+}$ detection are inconsistent. This present study investigated the changes of blood $iMg^{2+}$ correlated with metabolic demands during acute high-intensive exhaustive physical exercise in rats. After exhausted swimming (3-4 hours), blood pH, glucose, $HCO_3{^-}$, oxygen and ionized $Ca^{2+}$ ($iCa^{2+}$) were significantly decreased, whereas lactate, carbon dioxide, $iMg^{2+}$, ionized $Na^+$ and ionized $K^+$ were significantly increased. During the exhausted swimming, the changes in $iMg^{2+}$ showed a significant negative correlation with changes in pH, glucose, $HCO_3^-$ and $iCa^{2+}$, however a significant negative correlation with changes in lactate and anionic gap. It is concluded that the acute high-intensive exhaustive physical exercise could produced hypermagnesemia, an increase in blood $iMg^{2+}$ via stimulation of $iMg^{2+}$ efflux following increase in intracellular $iMg^{2+}$ from muscle induced by metabolic and respiratory acidosis.

• Applied Biological Chemistry
• /
• v.49 no.4
• /
• pp.287-292
• /
• 2006

The effects of cadmium on the catalase activity and isozyme patterns under light and dark conditions of rice(Oryza sativa L. cv. Dongjin) seedlings were examined. Cadmium treatment resulted in the notable enhancement of $H_2O_2$ contents in the seedling roots and leaves under light and dark conditions. The catalase isozyme patterns in the roots were different from those in the leaves, showing tissue-specific expression of the enzyme. Moreover, the expression patterns of catalase isozymes in the green seedling roots were different from those in the etiolated seedling roots following cadmium treatment. The increase of total catalase activity was about 16 times at 1 mM cadmium and marked inductions of the isozyme CAT1 and CAT2 contributed to this increase in the green seedling roots. On the other hand, in the etiolated seedling roots, total catalase activity was lower than that of control at 0.5 and 1 mM cadmium, even though catalase activity increased about 3 times at 0.1 mM cadmium. The 3 fold increase of total catalase activity was mainly due to the increase of CAT1, CAT3 and CAT4 at 0.1 mM cadmium. However, treatment with higher concentrations of cadmium decreased the activity of CAT2 and CAT4 in the etiolated roots. In the leaves, the catalase existed as three isozymes; one cationic isozyme CATc, one neutral isozyme CATn and one anionic isozyme CAT1 in the control. The isozyme patterns and total activities remained unaffected by cadmium under light and dark conditions in the seedling leaves. Taken together, it seems that cadmium-induced changes of catalase might be regulated by light in the roots, but not in the leaves.

• Applied Biological Chemistry
• /
• v.47 no.3
• /
• pp.339-343
• /
• 2004

Anionic surfactants such as sodium dioctyl sulfosuccinate (SDSS) and sodium dodecylbenzene sulfonate (NaDBS) and a nonionic surfactant, polyoxyethylene oleyl ether (OE-7) were tested for their protective, curative, and persistent activities on tomato late blight (TLB, Phytophthora infestans), red pepper blight (RPB, P. capsici), and cucumber downy mildew (CDM, Pseudoperonospora cubensis). They exhibited a strong protective activity on TLB, RPB, and CDM. Among them, $NaDBS\;(500\;{\mu}g/ml)$ showed the most in vivo antifungal activities(1-day protective activity) with control values of 99%, 100%, and 85% against TLB, RPB, and CDM, respectively. However, the three surfactants represented a weak disease controlling efficacy on TLB, RPD, and CDM in a 1-day curative application. SDSS and NaDBS exhibited a good persistent activities on TLB and RPB. Especially, NaDBS, at $500\;{\mu}g/ml$, showed control values of more than 88% on TLB and RPB in a 7-day protective application. The results indicate SDSS and NaDBS have a potential for the control of TLB, RPB, and CDM in the fields.

• Korean Journal of Animal Reproduction
• /
• v.25 no.2
• /
• pp.131-138
• /
• 2001

This experiment was designed to evaluate effects of nonspecific immunostimulator(NIS) Barodon-FX(equation omitted), anionic alkali mineral complex and far-infrared radiation solution on in vivo-produced mouse and in vitro-produced bovine embryos to blastocyst development. Proportion of mouse embryos developing into blastocyst was not greater in BSA- and Barodon-added medium than in BSA-control, but there was signifcantly different(P ＜ 0.05) in hatching and hatched blastocyst development between 0.25% Barodon-and PVP-contained medium(54.7%) than PVP-control(32.5%). BOEC and GC resulted in higher proliferation rate(24∼40% and 17∼22%, respectively) in 0.25∼0.5% Barodon-added medium than in controls, but proliferation of GC and CC greatly decreased in 1∼2% Barodon-added medium. Effect of Barodon on cell proliferation greatly varied among somatic cells. Proportion of early bovine embryos developing into morula and blastocyst was significantly greater(P ＜ 0.05) in 0.5% Barodon-added medium(50% and 63.6%) than in control(31.6% and 27.4%) under co-culture with BOEC and GC, but developmental rate was not different between other Barodon treatments and control. These data indicate that effect of Barodon on cell proliferation significantly varied between somatic cells and that addition of 0.5% Barodon in BOEC-coculture system may further improve blastocyst development in early bovine embryos.