• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1998년도 가을 학술발표논문집(II)
• /
• pp.559-564
• /
• 1998

The object of this thesis is an analytical study on shear deformation of reinforced concrete members using monte carlo method. Using the established experimental data that has been presented in various documents the stress-strain relationships curves of reinforced concrete (300kgf/$\textrm{cm}^2$~400kgf/$\textrm{cm}^2$) models are proposed. Finally, the theoretical values calculated using the analytical method developed in this study have been investigated in comparison with the experimental ones which were carried out earlier in order to prove its validity. From the results it has been shown that theoretical values agree quite well with experimental ones, and it could be pointed out that the presented analytical method is widely acceptable for the practical analysis of shear displacement of reinforced concrete members.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2011년도 제42회 하계학술대회
• /
• pp.1077-1078
• /
• 2011

This paper deals with eddy current analysis of linear switched reluctance motor using analytical method. First, flux density is calculated using analytical method. From flux density, eddy current is analyzed according to moving speed. Finally, analyzed result is compared with finite element method.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1994년도 가을 학술발표회 논문집
• /
• pp.325-330
• /
• 1994

In this study, analytical methods for predicting the long term behavior of steel-concrete composite structures due to creep and shrinkage of concrete are investigated. For structural analysis considering long term behavior, the results are much dependent6 on the predictive models for creep and shrinkage of concrete which are ACI model, CEB-FIP model and BP model and the methods for the time analysis of structures which are AEMM, RCM and IDM. To demonstrate the validity of the program which was developed for this study, a steel-concrete composite column subjected to constant axial deformation was tested, and the experimental results wewe compared with analytical results. It was found that stresses are redistributed between concrete and wide flange steel, and analytical results by ACI model and IDM well predict the experimental data.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1995년도 봄 학술발표회 논문집
• /
• pp.231-236
• /
• 1995

The object of this thesis is an analytical study on flexural deformation of high strength concrete structures using reliability theory. Using the established experimental data that have been presented in various documents the stress-strain relationship curves of high strength(500kgf/$\textrm{cm}^2$)models are proposed. Based on both methods of logarithm regression analysis and multiple regression analysis adopted in order to establish the relationships between design parameters, response random variables and flexural deformation analyzed using Monte Carlo simulation and Simpson composite formula. Additional random variables are introduced to incorporate both the confidence in the analytical accuracy of engineering mechanics associated with structural response quantities and the uncertainty in the construction quality control. The result is expected to accomodate other important design parameter of high strength concrete design in treating reliability theory that practicing engineers, structural engineering often face.

• Journal of Information Processing Systems
• /
• 제14권2호
• /
• pp.455-468
• /
• 2018

The concepts of graph theory are applied to model and analyze dynamics of computer networks, biochemical networks and, semantics of social networks. The analysis of dynamics of complex networks is important in order to determine the stability and performance of networked systems. The analysis of non-stationary and nonlinear complex networks requires the applications of ordinary differential equations (ODE). However, the process of resolving input excitation to the dynamic non-stationary networks is difficult without involving external functions. This paper proposes an analytical formulation for generating solutions of nonlinear network ODE systems with functional decomposition. Furthermore, the input excitations are analytically resolved in linearized dynamic networks. The stability condition of dynamic networks is determined. The proposed analytical framework is generalized in nature and does not require any domain or range constraints.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2004년도 전력전자학술대회 논문집(2)
• /
• pp.940-943
• /
• 2004

This Paper analysis variable characteristics of inductance profiles and basic magnetic fields for Switched Reluctance Motors(SRM). The varying Inductance and flux linkage on operating control condition are very important for developing control algorithm and SRM accurate drive system. Therefore, we have analytical model for varying inductance and flux linkage with simulation and experimental method, and to find an analytical expression for the SRM coenergy. There are shown some good results that comparison of simulated and analytical inductance, flux linkage and current waves.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2000년도 가을 학술발표회 논문집
• /
• pp.621-628
• /
• 2000

In this study, the influence of groundwater variation and surface settlement adjacent to the excavation site of subway station on $\bigcirc$$\bigcirc$ Gas station and the $\bigcirc$$\bigcirc$ building is analized. Measurement data of surface settlement, horizontal deformation and groundwater level are used to verify the results of Caspe analytical method and FLAC numerical analysis. Variation of groundwater level adjacent to the excavation site is modelled by the 3-D groundwater flow program, MODFLOW. The results of both the analytical method and the numerical method were quite close to the measurement data of surface settlement.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 1999년도 추계학술발표대회 논문집
• /
• pp.143-148
• /
• 1999

In this paper we present the results of an analytical investigation on the existing concrete structures which are reinforced with carbon fiber grid. The carbon fiber grid and polymer mortar are utilized in the reinforcement of concrete column, beam, and tunnel lining. The physical and mechanical properties of the carbon fiber grid and polymer mortar were obtained experimentally and then used in the analytical investigation. In the analysis concrete structures are modeled with 3-D solid finite elements and the carbon fiber grid is modeled with space frame elements. Through the investigation reinforcing effect of carbon fiber grid on the existing concrete structures is confirmed.

• 한국수학사학회지
• /
• 제27권5호
• /
• pp.347-364
• /
• 2014

This study aims at what is required knowledge and ability to pre-service math teachers in teacher certificate examination. First, the items are analyzed and among questions of discipline of mathematics education in the last five years are analyzed and classified. Second, an analytical framework suitable for item analysis is examined and the items are analysed by the analytical framework. Finally, helpful implications for discipline of mathematics education assessment can be drawn from this study. It is found that the discipline of mathematics education assessment has the following characteristics: 1) It assesses specific content of the assessment component; 2) It assesses a teacher's theoretical knowledge, practical knowledge and creative knowledge in terms of teaching ability; 3) There are six cognitive assessments; 4) There is an item for difficulty adjustment.

• 소음진동
• /
• 제9권1호
• /
• pp.174-183
• /
• 1999

An analytical model for the lateral vibration of beams with a bonded lap joint and partial layered dampers has been proposed in this paper. Both shear and normal forces acting along the interface between the elastic and viscoelastic layers were considered in the vibration analysis. Analytical results were compared with those obtained by a finite element method. Effects of the size and location of layers in partial dampers on system loss factor($\eta_s$) and resonant frequency($\omega_r$) were studied. which showed that partial dampers adhered to the site exhibiting the maximum amplitude of vibration were most influential in the increase of $\eta_s$ and the decrease of $\omega_r$. Specific system loss factor( $\eta_s$ divided by total mass of system) was also evaluated in the analysis.