• Journal of Mechanical Science and Technology
• /
• v.16 no.7
• /
• pp.966-974
• /
• 2002

An analytic approach has been employed to study condensate film thickness distribution inside cave-shaped cavity of a flat plate heat pipe. The results indicate that the condensate film thickness largely depends on mass flow rate and local velocity of condensate. The increasing rate of condensate film for circular region reveals about 50% higher value than that of vertical region. The physical properties of working fluid affect significantly the condensate film thickness, such as the condensate film thickness for the case of FC-40 are 5 times larger than that of water. In comparison with condensation on a vertical wall, the average heat transfer coefficient in the cave-shaped cavity presented 10∼15% lower values due to the fact that the average film thickness formed inside the cave-shaped cavity was larger than that of the vertical wall with an equivalent flow length. A correlation formula which is based on the condensate film analysis for the cave-shaped cavity to predict average heat transfer coefficient is presented. Also, the critical minimum fill charge ratio of working fluid based on condensate film analysis has been predicted, and the minimum fill charge ratios for FC-40 and water are about Ψ$\_$crit/=3∼7%, Ψ$\_$crit/=0.5∼1.3% respectively, in the range of heat flux q"=5∼90kW/㎡.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.36 no.4
• /
• pp.377-383
• /
• 2012

The temperature distribution of an asymmetric trapezoidal fin with various upper lateral surface slopes is investigated by using the two-dimensional analytic method. For this asymmetric fin, convection from the inner fluid to the inner wall, conduction from the inner wall to the fin base and conduction through the fin base are considered simultaneously. The temperature profile with the variation of dimensionless fin length and height coordinates is shown. Also, the temperature variation at the bottom tip of the fin is presented as a function of the fin shape factor. Heat losses through the fin base and from each side are compared for variations in fin length. One of the results shows that temperature at the fin bottom tip decreases linearly as the fin shape factor increases.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.12
• /
• pp.4697-4706
• /
• 2010

This paper suggested the optimal operating design method using simulation and ANP(Analytic Network Process) for mass-customization in the automotive component manufacturing industry. For this, first of all, we built the simulation model including various and complex factors in the field, and estimated the meta-model by RSM(Response Surface Method). Secondly using ANP, we calculated the weight of relative importance of evaluation factors gathered from decision makers. And then, we proposed the optimal operation designs by MOGA(Multi-Objective Genetic Algorithm), analyzed results of them. Moreover, by comparing the results with the consequences using AHP(Analytic Hierarchy Process), we showed its superiority of suggested method to the manner using AHP, because it reflects inner, outer dependency, and inter-relation among judgement factors. In conclusion, through this process, we can present the better way to serve mover effective, precise, and accurate information to decision makers when they build operation design for mass-customization system as automotive parts production system.

• Ocean and Polar Research
• /
• v.24 no.4
• /
• pp.491-500
• /
• 2002

Magnetic anomalies in the Dokdo and it's surroundings were investigated with respect to structure and origin of the Dokdo and surrounding seamounts. After normal and diurnal correction of measured magnetic data, crossover correction was applied to reduce errors between sets of magnetic anomalies. The errors from crossover operation result in decrease of about 51%, from 62.2 nT to 30.1 nT in standard deviation. Reduction-to-the-pole, second vertical derivative and analytic signal processing were applied to explore magnetic anomaly signatures in detail. Magnetic anomalies are most complicated in the 1st-Dok seamount, show SWW-NEE linear pattern in the 2nd-Dok seamount and lower to the 3rd-Dok seamount. Different magnetic anomaly patterns in three seamounts imply that three volcanic seamounts were formed at different times and are composed of rocks that were produced in different conditions. It seems that the 3rd-Dok seamount was first to form and followed by the 1st-Dok seamount. The complicated magnetic and second vertical derivative anomaly patterns in the 1st-Dok seamount may be due to subsidiary cones around crater or the presence of intruded magma bodies below sea surface and the Dokdo is probably a marginal subsidiary part of crater.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.13 no.2
• /
• pp.191-199
• /
• 1993

Diffusion of a steady horizontal line source in a turbulent shear flow is simulated by numerically solving a steady two-dimensional advective diffusion equation. The computational result is compared with the analytic solution for uniform velocity and diffusivity distributions over the depth. The analytic solution for constant velocity and diffusivity overestimates the degree of vertical mixing. The normalized equation indicates that friction factor is the only physical parameter that governs the vertical diffusion process. Sensitivities of the diffusion process to the friction factor and initial source position are analyzed. The rate of vertical mixing varies approximately as the square root of the friction factor. The optimal source position, which gives the most rapid mixing, lies above the mid-depth and moves toward the water surface as the friction factor increases.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.11
• /
• pp.8021-8029
• /
• 2015

This study obtains design assessment indexes that should be considered in order to improvements of the public space was to analysis the importance in the public officials/academics and practitioners side. Obtained assessment topics in accordance with characteristic of public space through previous research to them and after a detailed selection indicators was so lead through the FGI. Derived surface was subjected to the significance analysis AHP through the survey expert. For this study, the importance of the public space are working professionals usability, publicness, environment, connectivity, identity, spatiality the order, public officials/academics usability, environment, connectivity, identity, spatiality, publicness the order. In addition, professionals working in the comprehensive analysis of the most important priority was to recognize safety, public officials/academics of the most important element appeared to have cleanliness. The results obtained in this study will be used as an index that can be used in planning and evaluation for consideration of the next improvement of public space.

• 보존과학연구
• /
• s.25
• /
• pp.5-29
• /
• 2004

This research carried out ancient technique and composition of the relics recovered from the octagonal nine-storied pagoda of Woljeongsa temple using the scientific methods and obtained the following results. Firstly, The silver sarira inner case is consists of Ag, its materials comes out near 98wt%and comparing with the relics of Hwangnamdaechong, the contents of Ag and Ni are almost same with it. Secondly, The bronze sarira outer case, its contents of Cu is almost same with pure copper of which average is 99.7wt%. So, it should be named the copper sarira outer caserather than the bronze sarira outer case that has been called. Thirdly, The bronze mirror, though the contents of tin and lead are less than other contents which have been studied, they tend to have white color so they need to be made a close study. Especially, Because cultural property of nondestructive surface analytic method is not analyzed by the analysis of cross section and the moisten analysis, it may be occurred analytical errors by other factors.

• Journal of Advanced Marine Engineering and Technology
• /
• v.35 no.7
• /
• pp.930-937
• /
• 2011

The characteristics of mean velocity and turbulence have been analyzed in the circular open channel flow using PIV measurement data for a wide range of water depth. The measured data are fitted to a velocity distribution function over the whole depth of the open channel. Reynolds shear stress and mean velocity in wall unit are compared with the analytic models for fully-developed turbulent boundary layer. Both the mean velocity and Reynolds shear stress have different distributions from the two-dimensional boundary layer flow when the water depth increases over 50% since the influence of the side wall penetrates more deeply into the free surface. The cross-stream Reynolds normal stress also has considerably different distribution in view of its peak value and decreasing rate in the outer region whether the water depth is higher than 50% or not.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.9 no.1
• /
• pp.22-29
• /
• 1989

The important point of MPI is the analysis of leakage field in the defective regions. The analysis of leakage field depends on many factors such like geometry and character of defect. In general the calculation of magnetic leakage fields arising from such defects presents an extremely complicated mathematical problem and is practically insoluable, since the inhomogeneities have complex geometrical shapes and may differ in physical nature. Therefore, this paper describes Hall probe measurements of residual leakage field around artificial flaws in alloy steel bar, and shows how the results to recent developments in 2D dipole and analytic models of the magnetic field defect interaction.

• Bulletin of the Korean Chemical Society
• /
• v.32 no.spc8
• /
• pp.2973-2977
• /
• 2011

It has been known that the inertial dynamics has a little effect on the reaction rate in solutions. In this work, however, we find that for diffusion-controlled reactions between a ligand and a receptor on the cell surface there is a noticeable inertial dynamic effect on the reaction rate. We estimate the magnitude of the inertial dynamic effect by comparing the approximate analytic results obtained with and without the inertial dynamic effect included. The magnitude of the inertial dynamic effect depends on the friction coefficient of the ligand as well as on the relative scale of the receptor size to the distance traveled by the ligand during its velocity relaxation time.