• Herbal Formula Science
• /
• v.21 no.1
• /
• pp.16-35
• /
• 2013

Objectives : Proposed a formula analysis standard about the individual formula which is to be put in the specific discussions in order to increase the effect of formula education at the college of Korean medicine. Methods : Examined the ingredient combination analysis written in Agastache Powder to Rectify the Ki which was put in the 27kinds of formula science book published in both Korea and China. Results : Must analyze the formula according to the existing formula. The combination of the ingredients should be analyzed into herb pairs such as seven different combinations. The effect and disease for which medicine is efficacious, should be analyzed and tabulated by Agastache Powder to Rectify the Ki. The formula should be anlayzed and schematized by the sytem of Chief, Deputy, Assistant and Envoy. The basic formula should be analyzed and schematized by the combination of formula, adding and removing the ingredients. Analyzing Agastache Powder to Rectify the Ki into the system of Chief, Deputy, Assistant and Envoy shows the following: chief herb is Agastaches Herba; deputy herb is Perillae Folium and Angelicae dahuricae Radix; assistant herb is Pinelliae Rhizoma preparatum, Magnoliae officinalis Cortex, Citri reticulatae Pericarpium, Arecae Pericarpium, Platycodi Radix, Atractylodis macrocephalae Rhizoma, Poria, and envoy herb is Glycyrrhizae Radix preparata, Zingiberis Rhizoma recens, Jujubae Fructus. Conclusions : In conclusion, it is believed that the formula education at colleges of Korean medicine would be effectively achieved if it is processed according to the standardized formula analysis and its rule about individual formula that is to be decided.

• Journal of Environmental Science International
• /
• v.7 no.5
• /
• pp.581-590
• /
• 1998

This st at the development of the adequate sediment yield formulas in Wi-Stream basin ; IHP representative basin in Korea. As a result of applying outstanding sediment yield formulas among the existing formulas, it is analyzed that including the Engelund ＆ Hansen formula, Yang formula is proper to the Wi-Stream basin. And as a result of sensitivity analysis to the sediment parameters it is analyzed that Rijn and Actors ＆ White formula is more sensible than any other formulas which has been applied the velocity and depth among the parameters. Also, Engelund ＆ Hansen and Yang formula is less sensible than any other formulas. In Wi-Stream basin, it is analyzed that Yang and Engelund ＆ Hansen formula is the most suitable sediment yield formula in this study. But because the existing formulas had been developed in foreign countries and applied the foreign natural livers and reservoirs, it makes careful use of Korean alluvial river and hoped that it will be developed the most adequate formula in Wi-Stream basin.

• Journal of Fisheries and Marine Sciences Education
• /
• v.23 no.3
• /
• pp.526-532
• /
• 2011

The formula feed has been valuated its superiority in the aquaculture industry. However, the fish farmer is preferred the raw feed than the formula feed yet. The objectives of this study are to clarified the reason of lower usage of formula feed in aquaculture. We referred to the literature and the enquete, and inspected on-site for this study. Two types of managements, formula feed-usage or not, were compared and analyzed. The results show that the perception of formula feed are changing even though the quality of formula feed is not clear and the growth efficiency is lower than raw feed, because the domestic supply of raw feed was not smooth and the cost was raised.

• Water for future
• /
• v.11 no.1
• /
• pp.47-58
• /
• 1978

This study is concerned with the analysis of the formulas which give both the quantity of the total, suspended and bed loads as functions of stream and sediment characteristics. The numerical analysis of sediment discharge formulas is described and the computer program for the following 4 formulas are developed; (1) Einstein's Formula (2) Toffaleti's Formula (3) Brown's Formula (4) Kikkawa's Formula In the analysis of these formulas, the hydraulic data of the river in the downstream of the Han River are used, and these formulas have been tested by application and comparison with observed data and the results computed by the computer. In these methods and procedures, the most satisfactory and convenient formula is selected. The design and planning of the river channel regulation works are determined by computing the river bed variation by using the sediment discharge computed from the selected formula.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.21 no.5
• /
• pp.393-399
• /
• 2011

An empirical formula proposed by Petersson and Plunt(PP's formula) and finite element analysis for impedance calculation of ship equipment foundations are investigated by comparing the analysis results with those of experimental results. The PP's formula well estimates resonant frequency of the foundations and impedance level except around the resonant region although the impedance level around the resonant frequency is heavily dependent upon the assumed loss factor. The results show that the PP's formula and finite element models can be complementarily used to estimate the impedance characteristics of various types of foundation of ships in design stage.

• Journal of Korean Society of Steel Construction
• /
• v.9 no.3 s.32
• /
• pp.391-400
• /
• 1997

The objective of this paper is to suggest formula of Concrete Filled Tube Beam-Column members maximum strength by using of numerical analysis and tests. The numerical analysis results are compared with test results for evaluating numerical analysis method. The formula of Limit State Design of Architectural Institute of KOREA is used for basic form of suggestion formula. In order to suggest formula, two methods are used. One is to use the coefficient, and the other is to use the amplified factor of material strength. The formula by two methods are compared with numerical analysis results.

• Steel and Composite Structures
• /
• v.33 no.2
• /
• pp.181-194
• /
• 2019

This paper presents an efficient approach to generate a new empirical formula to predict the axial compression capacity (ACC) of circular concrete-filled tube (CCFT) columns using the artificial neural network (ANN). A total of 258 test results extracted from the literature were used to develop the ANN models. The ANN model having the highest correlation coefficient (R) and the lowest mean square error (MSE) was determined as the best model. Stability analysis, sensitivity analysis, and a parametric study were carried out to estimate the stability of the ANN model and to investigate the main contributing factors on the ACC of CCFT columns. Stability analysis revealed that the ANN model was more stable than several existing formulae. Whereas, the sensitivity analysis and parametric study showed that the outer diameter of the steel tube was the most sensitive parameter. Additionally, using the validated ANN model, a new empirical formula was derived for predicting the ACC of CCFT columns. Obviously, a higher accuracy of the proposed empirical formula was achieved compared to the existing formulae.

• Herbal Formula Science
• /
• v.30 no.3
• /
• pp.145-154
• /
• 2022

Objective : This study aims to study core herbs and formulas in Internal medicine on Spleen system, to enhance efficiency in teaching Internal medicine on Spleen system, Herbalogy, Formula science, and to increase integration of the courses. Methods : Frequency notion, which was generally used in previous studies, was used in this study along with network analysis. Results : Frequently used herbs, herbs with high centrality, frequently combined herbs and core formula were found in this study. The herb with the highest frequency and centrality was 'Citri Unshius Pericarpium', and 'Atractylodis Rhizoma Alba - Citri Unshius Pericarpium' was the most frequent herb combination. The results of network analysis showed a total of 5 herbal communities of combination. Conclusion : Core herbs were found based on the frequency notion, which is a traditional analysis method. Also, core herbs, herbal combinations, formulas that can that may be overlooked when using frequency notions were found by using network analysis. The results may lead to enhancing efficiency in the education of Internal medicine on Spleen system, Herbalogy, Formula science courses and the integration of courses.

• The KSFM Journal of Fluid Machinery
• /
• v.2 no.3 s.4
• /
• pp.52-58
• /
• 1999

The leakage and rotordynamic coefficients of see-through type gas labyrinth seals are determined using a two-control-volume-model analysis with Moody's wall-friction-factor formula which is defined with a large range of Reynolds number and relative roughness. Jet flow theory are used for the calculation of the recirculation velocity in the cavity. For the reaction force from the labyrinth seal, linearized zeroth-order and the first-order perturbation equations are developed for small motion about a centered position. The leakage and rotordynamic coefficient results of the present analysis are compared with Scharrer's theoretical analysis using Blasius' wall-friction-factor formula and Pelletti's experimental results. The comparison shows that the present analysis using Moody's wall-friction-factor formula and Scharrer's theoretical analysis using Blasius' wall-friction-factor formula give the same results for a smooth seal surface and the range of Reynolds number less than $10^5$.

• International Journal of Automotive Technology
• /
• v.6 no.4
• /
• pp.375-381
• /
• 2005

This paper presents linear algebraic equations in the form of recursive formula to compute elastokinematic characteristics of a suspension system. Conventional methods of elastokinematic analysis are based on nonlinear kinematic constrant equations and force equilibrium equations for constrained mechanical systems, which require complicated and time-consuming implicit computing methods to obtain the solution. The proposed linearized elastokinematic equations in the form of recursive formula are derived based on the assumption that the displacements of elastokinematic behavior of a constrained mechanical system under external forces are very small. The equations can be easily computerized in codes, and have the advantage of sharing the input data of existing general multi body dynamic analysis codes. The equations can be applied to any form of suspension once the type of kinematic joints and elastic components are identified. The validity of the method has been proved through the comparison of the results from established elastokinematic analysis software. Error estimation and analysis due to piecewise linear assumption are also discussed.