• Current Optics and Photonics
• /
• v.5 no.3
• /
• pp.261-269
• /
• 2021

Binary-phase complex spatial light modulators (BP-C-SLMs) are proposed and simulated. This study shows that bottom-top mirror-symmetrical uniaxial systems between two orthogonal polarizers allow one to construct BP-C-SLMs. BP-C-SLMs double the information-handling capacity per pixel, compared to the conventional amplitude-only spatial light modulators (A-SLMs), as well as being simply implemented with a single spatial light modulator (SLM), rather than a combination of an A-SLM and a binary-phase SLMs. Under limited conditions, BP-C-SLMs can control only the amplitude in single-phase space, and act as A-SLMs.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.515-515
• /
• 2013

RF는 사이클로트론에서 빔을 원하는 에너지로 가속하기위해 쓰인다. MC50 사이클로트론에는 두 개의 DEE가 있고 각각 독립된 LLRF모듈과 증폭기를 통해 제어된다. 주요 제어변수는 DEE1,2의 Voltage와 양단간의 Phase인데 이는 RF Generator에서 특정 주파수로 발생된 RF 시그널의 Amplitude와 Phase를 RF Modulator에서 변조하므로 제어되어진다. 지금 현재의 Modulator는 오래되어 DEE Voltage의 컨트롤이 잘 이루어지지 않고 있고 가끔 연결부위에서 문제를 보여 새 Modulator를 제작하게 되었다. 기존의 LLRF는 아날로그 방식인데 아날로그 방식은 외부제어가 어렵고 확장이 쉽지 않아 디지털 제어방식으로 설계하였다. 새 LLRF는 저속처리부와 고속처리부로 두 부분으로 구성하였다. Final amplifier와 cavity의 상태를 체크하는 저속처리부는 PLC로 RF 시그널의 Amplitude와 Phase를 제어하는 고속처리부는 FPGA로 제어할 계획이다.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.02a
• /
• pp.509-509
• /
• 2012

RF는 사이클로트론에서 빔을 원하는 에너지로 가속하기 위해 쓰인다. MC50 사이클로트론에는 두 개의 DEE가 있고 각각 독립된 LLRF모듈과 증폭기를 통해 제어된다. 주요 제어변수는 DEE1,2의 Voltage와 양단간의 Phase인데 이는 RF Generator에서 특정 주파수로 발생된 RF 시그널의 Amplitude와 Phase를 RF Modulator에서 변조하므로 제어되어진다. 지금 현재의 Modulator는 오래되어 DEE Voltage의 컨트롤이 잘 이루어지지 않고 있고 가끔 연결부위에서 문제를 보여 새 Modulator를 제작하게 되었다. 새로 제작된 Modulator를 구형과 비교해 볼 때 Driving Amplifier에서 소모되는 전력이 7~14% 줄어드는 효과를 볼 수 있었다.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.9 no.4
• /
• pp.1-6
• /
• 1972

A super widely amplitude modulating AM modulator system, utilizing the impedance trasformation characteristics of transmission line is presented. The analyses and oscillograms obtained from the AM modulator systems using VHF tube, FET or VVC diode as an active element are added to verify the principle of the system.

• The Journal of the Acoustical Society of Korea
• /
• v.18 no.5
• /
• pp.52-57
• /
• 1999

It is very important to design of QAM modulator of high spectral efficiency for high speed data transmission. In this paper, typical 16-QAM modulator is designed by modification design of DDFS(direct digital frequency synthesizer). DDFS generates sinusoidal waveform digitally to the frequency setting word. Phase modulation is accuratly made by control of a generated phase increment value and amplitude modulation is accomplished in the D/A converter output by control of amplitude level. For the suppression of harmonics and glitch, dual-structured DDFS is studied to improve the spurious characteristics. P-Spice is used for design and simulation in mixed mode. Also we can get the satisfactory results of designed 16-QAM modulator from the constellation output.

• Proceedings of the Korean Institute of Communication Sciences Conference
• /
• 1986.10a
• /
• pp.16-19
• /
• 1986

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.14 no.6
• /
• pp.575-583
• /
• 2003

In thesis we applied the short or open reflection type for IQ vector modulator The open or short type is operated even exception of other redundancy circuit. Generally IQ vector modulator uses MESFET in performing reflection open or short, then minus voltage which is having complex structure is required to operate MESFET via IQ signal. However BJT can be substituted for MESFET, BJT is improved characteristics like as cutoff frequency, electron mobility and so on. We used BJT in IQ vector modulator which is compatible with TTL level in I,Q digital signal, and attached AGC function. We got the result of operations within ${\pm}$ 1$^{\circ}$ phase and ${\pm}$ 0.6 dB amplitude Variation With full range of 20 dB and Variation of ${\pm}$ 6$^{\circ}$ Phase and ${\pm}$ 0.5 dB amplitude Versus full temperature range.

• Journal of the Optical Society of Korea
• /
• v.18 no.3
• /
• pp.288-291
• /
• 2014

This paper presents a new method for measuring the half-wave voltage $V_{\pi}$ of an electro-optic phase modulator based on a phase-modulated photonic link with interferometric demodulation. By using this method, the $V_{\pi}$ can be obtained with the RF voltage amplitude input required to achieve 1-dB gain compression of link and the differential delay of a Mach-Zehnder interferometer. We measure the $V_{\pi}$ of a commercial phase modulator by using the presented method and the carrier/the first sideband intensity ratio method. Furthermore, we compare the two measurements with the typical value provided by the manufacturer. The experiment shows that this novel measurement method is feasible, straightforward, and accurate.

• Journal of IKEEE
• /
• v.22 no.4
• /
• pp.1019-1024
• /
• 2018

In this paper, we suggest a combined cost function to find out the optimal operation of an envelope tracking system, and evaluated its performance with Quadrature Amplitude Modulation (QAM) waveform, with which envelope tracking coefficients for the peak drain efficiency and the bandwidth of power amplifiers are determined. Based on the classical envelope tracking theory, the operation of the supply modulator, which is a key part of the envelope tracking process, is modeled and analyzed mathematically. Then characteristics of the modulator by setting envelope shaping function as a cubic polynomial and sweeping the coefficients of this function was analyzed. By sweeping the coefficients, efficiency and bandwidth at each condition with 64-QAM signal was used to obtain optimal point of the supply modulator. Compared to the conventional shaping functions, the optimized function showed the bandwidth reduction by 12.7 percent point while the efficiency was maintained.

• Journal of the Institute of Electronics Engineers of Korea TE
• /
• v.37 no.1
• /
• pp.35-41
• /
• 2000

This paper considers the consturction of 24/25 I-NRZI (Interleaved - Non Return to Zero Inverse) modulator designs for DVCR (Digital Video Cassette Recorder), and size of validity bit in order to store the amplitude value of square-wave and the standard data ( sine and cosine coefficients) at ROM Table that to acceptable the spectrum standard. The validity bit size of the standard data and the amplitude value of square-wave that to store at ROM Table are affected the size of pilot signal on the output spectrum, and the hardware size of modulator. At the designable 24/25 I-NRZI modulator, we simulated using random pattern (F0,F1,F2) that to verification the output data of the spectrum. Moreover, the resultant of the spectrum analysis, at the optimizing value, is 0.065 on the amplitude value of square-wave, and 3bit on the size of bit in order to store the standared data at ROM Table. In order to verify the hardware of designable 24/25 I-NRZI modulator, we perform to modeling of C-language firstly, and coding to Verilog HDL (Cadence Verilog XL) and synthesized using Synopsys (Library "Samsung KG75") tool as a base of spectrum results. In a foundation of this result, we are considered the size of hardware. In this paper, a considerable 24/25 I-NRZI modulator designable less than 10,000 gates as that is improved consturction as regards the path method of pre-coder etc, and able to application digital camcorders as now practical use.