• 한국세라믹학회지
• /
• 제33권6호
• /
• pp.672-678
• /
• 1996

The relationship between domain switching and acoustic emission (AE) during poling was investigated using the tetragonal ferroelectric ceramics with composition of (Pb,La)TiO3+0.01MnO2 The amount of AE generation during poling increased with increasing dc electric field and raising temperature. It was confirmed that the change of the amount of AE generation with poling condition resulted from the difference of the amount of 90$^{\circ}$ domain switching and total amount of AE generation for 10 minutes was approximately proportional to the amount of 90$^{\circ}$domain switching. The A generations of two specimens which have different tetragonality rations(c/s rations) 15 at% and 24at% La-doped were also investigated. The sample with c/a ratio of 1.012 where 90$^{\circ}$ domains are dominate had larger amount of AE generation and 90$^{\circ}$ domain switching compared with the sample with c/a ratio of 1.004 where 180$^{\circ}$ domains are dominant.

• 한국의류산업학회지
• /
• 제10권6호
• /
• pp.900-906
• /
• 2008

This study investigated factors influencing consumers' switching behavior in apparel purchasing situation. As customer switching behavior is getting more and more important, a considerable amount of researches have focused on how service providers acquire and sustain customers. The field of customers' switching behavior has been relatively well researched over the years, at least from the perspective of the cultural value(Chemyen). The purpose of this study is to understand customer' switching behavior to relationship benefits and Chemyeon. The sample was consisted on 182 females over 20 years old living in Ulsan and Gyungnam province. The data was analyzed by frequency, reliability, factor analysis, and structural equation model analysis. Findings showed that Chemyeon was shown to reduce customer' switching behavior. Also, three factors of relationship benefits(economic benefit, social·psychological benefit, and special treatment benefit) had negative effects on customer' switching behavior.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2005년도 International Meeting on Information Displayvol.I
• /
• pp.105-108
• /
• 2005

We demonstrate an electro-optical device based on the flexoelectric effect of a short-pitched cholesteric liquid crystal. By using a dual-frequency switchable nematic, a small amount of chiral dopant and a small amount of phase-separated polymer localized on the surface, we were able to create a device that operates in amplitude (flexoelectric) and phase(dielectric) modes. At high frequency the dual frequency liquid crystal suppresses the phase mode at higher voltage, which improves the switching speed, and thereby preserving the in-plane-switching mode.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2005년도 학술대회 논문집
• /
• pp.251-255
• /
• 2005

This paper proposes a new soft switching technique for a phase-shift controlled bi-directional DC-DC converter. The described converter employs a low profile high frequency transformer and two active full-bridge converters for bidirectional power flow capability. A new soft switching technique is proposed, which guarantees soft switching over wide range (no load to full load) without any additional circuit components. In the proposed switching scheme, the switch pairs in the diagonal position of the converter each are turned on/off simultaneously by the switching signals with a variable duty ratio depending on the phase shift amount, and the converter is operated without freewheeling interval.

• 대한임베디드공학회논문지
• /
• 제5권1호
• /
• pp.18-22
• /
• 2010

In real-time embedded systems, the responsibility is the most important thing because it is related to human life. Context switching is a part of which can slow down the responsibility. We therefore should minimize the amount of state that needs to be saved during context switching. In this paper, we introduce a new architecture (Register Farm) for context switching which can exchange two contexts in one cycle time. Although it might increase the cost of MCU design and the complexity of circuit, it cannot miss any interrupt during context switching. Consequently, Register Farm architecture can make embedded systems spread out in human life because it can increase reliability and responsibility in real time embedded systems.

• 한국지진공학회논문집
• /
• 제13권4호
• /
• pp.67-76
• /
• 2009

최근에 Active interaction control(AIC) 시스템이 준능동 제어 시스템의 하나로 제안되었다. AIC 시스템은 제어 대상 구조물과 보조 구조물로 구성되며, 두 구조물간의 실시간 결합-분리를 통해서 제어 대상 구조물을 제어하게 된다. 구조물간의 결합과 분리를 담당하는 장치의 실시간 변환은 스위칭 제어 알고리듬의 결합-분리 조건식에 의해 제어된다. 기존 스위칭 제어 알고리듬의 경우, 제어 대상 구조물의 응답을 효과적으로 감소시키는 반면 불필요하게 큰 제어력과 과도한 결합-분리 횟수를 필요로 하는 단점을 가지고 있다. 본 논문에서는 구조물간의 효율적인 결합-분리 조정을 위해서 스위칭 활성화 영역과 스위칭 비활성화 영역을 분리 표현하였으며, 결합-조건식에 의해 결정되는 스위칭 활성화 영역과 스위칭 비활성화 영역간의 일반적인 관계를 포괄 스위칭 틀을 이용하여 나타냈다. 과도한 결합-분리 횟수와 불필요하게 큰 제어력의 효과적인 감소를 위해서 새로운 스위칭 제어 알고리듬의 결합-분리 조건식은 포괄 스위칭 틀안에서 설계되었다. 또한 기존 논문에서 사용된 컨트롤 샘플링 주기(Control sampling period)의 역할을 결합-분리 횟수의 관점에서 재해석하였다. 제안된 알고리듬의 효용성과 컨트롤 샘플링 주기의 역할을 검증하기 위해서 단자유도 모델을 이용하여 자유진동에 대한 수치해석을 수행하였다. 수치해석결과, 총 스위칭 횟수를 감소시키기 위한 컨트롤 샘플링 주기의 인위적인 연장은 시스템의 제어 성능 향상에 필요한 구간 변환을 샘플링 주기 사이에서 억제시키는 단점을 가지고 있음을 확인하였다. 본 논문에서 제안된 알고리듬의 경우, 각각 과도한 결합-분리 횟수와 불필요하게 큰 제어력을 감소시키는데 효과적임을 알 수 있다.

• Journal of Power Electronics
• /
• 제17권4호
• /
• pp.1097-1108
• /
• 2017

Accurate calculation of the conduction and switching losses of a power electronic converter is required to achieve the efficiency of the converter. Such calculation is also useful for computing the junction temperature of the switches. A few models have been developed in the articles for calculating the switching energy losses during switching transitions for the given values of switched voltage and switched current. In this study, these models are comprehensively reviewed and investigated for the first time for ease of comparison among them. These models are used for calculating the average amount of switching power losses. However, some points and details should be considered in utilizing these models when switched current or switched voltage presents time-variant and alternative quantity. Therefore, an applicable technique is proposed in details to use these models under the above-mentioned conditions. A proper switching loss model and the presented technique are used to establish a new and fast method for obtaining the average switching power losses in any type of power electronic converters. The accuracy of the proposed method is evaluated by comprehensive simulation studies and experimental results.

• KIEE International Transaction on Electrical Machinery and Energy Conversion Systems
• /
• 제11B권4호
• /
• pp.185-192
• /
• 2001

In SRM drive, the ON·OFF angles of each phase switch should be accurately controlled in order to control the torque and speed stably. The accuracy of the switching angles is dependent upon the resolution of the encoder and the sampling period of the microprocessor, that are used to provide the information of the rotor position and to control the SRM power circuit, respectively. However, as the speed increases, the amount of the switching angle deviation from the preset values is also increased. Therefore, the low cost encoder suitable for the practical and stable SRM drive is proposed and the control algorithm to provide the switching signals using the simple digital logic circuit is also presented in this paper, As a result, a stable high speed SRM drive can be achieved by the high resolution switching angle control and it is verified from the experiments that the proposed encoder the logic controller can be a powerful candidate for the practical low cost SRM drive.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2010년도 하계학술대회 논문집
• /
• pp.370-370
• /
• 2010

The effects of adding higher-valence impurities on the bipolar resistive switching characteristics of Pt/$NiO_{1+x}$/TiN MIM stacks and physical properties were investigated. $NiO_{1+x}$ films with 14% W deposited at 20% oxygen partial pressure exhibited the bipolar resistance switching characteristics in Pt/$NiO_{1+x}$/TiN MIM stacks, while $NiO_{1+x}$ films with 8.2% W show unipolar resistance switching behavior. The relationship of W-doping and the crystallinity was studied by X-ray diffraction. The metallic Ni contents and $WO_x$ binding states with W amount was investigated by XPS. Our result showed that the metallic Ni, $WO_x$ binding states, and crystallinity in $NiO_{1+x}$ played an important role on the bipolar resistive switching.

• 전기학회논문지
• /
• 제61권11호
• /
• pp.1606-1610
• /
• 2012

Hysteresis current regulator has been used widely because of its simple principle and structure. However, when the current band width is too narrow or the applied voltage is relatively too high, the switching frequency may increase abruptly and it generates a large amount of heat. Thus, this study will suggest a better and simple method to reduce the switching frequency. For single phase current control, the proposed hysteresis current control is executed by adding 0 mode state and comparing the slope of the current reference. This simple method decreases the generated switching frequency and significantly reduces the generated heat. This proposed method was proved with simulations and experiments comparing with the classical hysteresis current control method.