• Environmental Analysis Health and Toxicology
• /
• v.16 no.4
• /
• pp.223-226
• /
• 2001

Acetanilide is a High Production Volume Chemical, which is produced about 2,300 tons/year in Korea as of 1998 survey. Most is used as an intermediate for synthesis of pharmaceuticals and dyes. The chemical is one of seven chemicals, which are under the frame of OECD SIDS program sponsored by National Institute of Environmental Research of Korea. Regarding the information on the environmental fate. bioconcentration is one of important factor to estimate the environmental tranfer. However, measurement of bioconcentration needs high expense and time. For this reason, OECD recommends to use BCFWIN model to estimate bioconcentration of organic chemicals, BCFWIN estimates the bioconcentration factor (BCF) of an organic compound using the log octanol-water partition coefficient (Kow) of the compound. Structures are entered into BCFWIN through SMITES (Simplified Molecular Input Line Entry System) notations. The BCFWIN method classifies a compound as either ionic or non-ionic. ionic compounds include carboxylic acids, sulfonic acids and salts of sulfonic acids, and charged nitrogen compounds (nitrogen with a + 5 valence such as quaternary ammonium compounds). All other compounds are classified as non-ionic. In this study, bioaccumulation of acetanilide was estimated using BCFWIN model based on SMIIES notation, chemical name data and partition coefficient as one of environmental fate/distribution of the chemical elements.

• Microbiology and Biotechnology Letters
• /
• v.30 no.3
• /
• pp.258-263
• /
• 2002

In this study the effects of temperature, pH, and addition of some minerals were investigated in lactic acid fermentation using Enterococcus faecalis RKYI . As a result, strain of RKYl had retained biological activity at the wide range of temperature($34-46^{\circ}C$) and pH(6.0-9.0), and the optimum temperature and pH were $42^{\circ}C$ and 7.0, respectively. When the effect of various phosphate sources added on lactic acid fermentation was studied, di-basic forms of phos-phate(especially, ammonium phosphate and potassium phosphate) had more stimulating effect rather than mono-basic phosphate sources. And there were no perceivable effect of manganese and magnecium salts addition on lactic acid fermentation.

• International Journal of Oral Biology
• /
• v.33 no.4
• /
• pp.217-221
• /
• 2008

Bicuculline is one of the most commonly used $GABA_A$ receptor antagonists in electrophysiological research. Because of its poor water solubility, bicuculline quaternary ammonium salts such as bicuculline methiodide (BMI) and bicuculline methbromide are preferred. However, a number of studies have shown that BMI has non-$GABA_A$ receptor-mediated effects. The substantia gelatinosa (SG) of the trigeminal subnucleus caudalis (Vc) is implicated in the processing of nociceptive signaling. In this study, we investigated whether BMI has non-GABA receptor-mediated activity in Vc SG neurons using a whole cell patch clamp technique. SG neurons were depolarized by application of BMI ($20{\mu}M$) using a high $Cl^-$ pipette solution. GABA ($30-100{\mu}M$) also induced membrane depolarization of SG neuron. Although BMI is known to be a $GABA_A$ receptor antagonist, GABA-induced membrane depolarization was enhanced by co-application with BMI. However, free base bicuculline (fBIC) and picrotoxin (PTX), a $GABA_A$ and $GABA_C$ receptor antagonist, blocked the GABA-induced response. Furthermore, BMI-induced membrane depolarization persisted in the presence of PTX or an antagonist cocktail consisting of tetrodotoxin ($Na^+$ channel blocker), AP-5 (NMDA receptor antagonist), CNQX (non-NMDA receptor antagonist), and strychnine (glycine receptor antagonist). Thus BMI induces membrane depolarization by directly acting on postsynaptic Vc SG neurons in a manner which is independent of $GABA_A$ receptors. These results suggest that other unknown mechanisms may be involved in BMI-induced membrane depolarization.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.4 no.2
• /
• pp.1-9
• /
• 1996

The possibility of using waste brine and cabbage waste from kimchi industry as raw materials for the production of yeast cell mass was investigated. Among four strains of osmotolerant yeast, Candida guilliermondii ATCC 6260 showed the best growth in the waste brine containing about 1.0g/L of reducing sugar and 7% to 12% of NaCl. The growth of C. guilliermondii in waste brine was affected slightly between the temperature range of $25^{\circ}C$ to $35^{\circ}C$ and the initial pH of 3 to 6. The NaCl concentration up to 9% was not inhibitory to the growth of C. guilliermondii and the addition of 10mM of ammonium salts or 5mM of potassium phosphate had no effect on the growth. The growth of yeast reduced BOD of the waste brine by 85% within 24hours. When C. guilliermondii was cultured in waste brine added with cabbage juice extracted from waste cabbage, the cell mass was increased significantly.

• Microbiology and Biotechnology Letters
• /
• v.9 no.3
• /
• pp.145-152
• /
• 1981

Microorganisms from the waste water of starch industry, were isolated and a strain, Y-124, possessing a powerful enzymic activity was selected and identified as a member of the genus Bacillus. The ideal cultural condition for the formation of $\alpha$-amylase form Bacillus Y-124 and its preservation was investigated in connection with the biotechnological and industrial approach to the bulk enzyme production. High yield of $\alpha$-amylase was observed in medium containing casein as well as calcium pantothenate in this work. Calcium ions were found to have an effect in forming this particular enzyme. Ammonium phosphate dibasic was an important inorganic nitrogen source for the formation of $\alpha$-amylase. And preservation of this enzyme was greatly affected by calcium or sodium salts. The addition of calcium carbonate or sodium sulfate presented the most effective result for the prevention of its denaturation to various factors. The above data was obtained with crude enzyme preparation.

• Journal of Pharmaceutical Investigation
• /
• v.24 no.2
• /
• pp.57-65
• /
• 1994

To increase the dissolution rate of practically insoluble biphenyl dimethyl dicarboxylate (DDB), various solid dispersions were prepared with water soluble carriers, such as povidone (PVP K-30), poloxamer 407, sodium deoxycholate (SDC) and polyethylene glycol (PEG) 6000, at drug to carrier ratios of 1:3, 1:5 and 1:10 (w/w) by solvent or fusion method. Dissolution test was performed by the paddle method. The dissolution rate of DDB tablets (25 mg) on market was found to be very low (11.44, 9.02 and 6.42% at pH 1.2, 4.0 and 6.5 after 120 min, respectively). However, dissolution rates of DDB from various solid dispersions were very fast and reached supersaturation within 10 min. DDB-PEG 6000 solid dispersion appeared to be better in enhancing the in vitro dissolution rate than others. Furthermore, the incorporation of DDB and phosphatidylcholine (PC) into ${\beta}-cyclodextrin$ at ratios of 1:2:20, 1:5:20 and 1:10:20 resulted in a 4.9-, 11.2- and 19.6-fold increase in DDB dissolution after 120 min as compared with the pure drug, respectively. This might be attributed to the formation of lipid vesicles which entrapped a certain concentration of DDB during dissolution. On the other hand, the permeation of DDB through rabbit duodenal mucosa was examined using some enhancers such as SDC, sod. glycocholate (SGC) and glycyrrhizic acid ammonium salt (GAA). Only trace amounts of DDB were found to permeate through deuodenal mucosa in the absence of enhancer. SDC was found to markedly decrease the permeation flux of DDB, however, SGC and GAA (5 mM) enhanced the flux of DDB 1.6 and 2.4 times higher as compared with no additive, respectively.

• Applied Chemistry for Engineering
• /
• v.5 no.2
• /
• pp.247-254
• /
• 1994

Nonionic surfactants, diglycerol N-acyl glutamates were prepared through the esterification of N-acryl glutamic acids and glycidol in the presence of quarternary ammonium salts. Their cmc evaluated by the surface tension method was $0.15{\sim}0.75mol/{\ell}$, and the surface tension of aqueous solution was decreased to 28~35dyne/cm. L-DGLG with acyl group of carbon number of 12 showed good foaming power and emulsifying power, and the emulsifying power in toluene was stronger than in soybean oil. Dispersion effect of L-DGPG and L-DGSG with acyl group of carbon number of 16 and 18 in carbon black and ferric oxide were higher than L-DGLG. All of them showed good biodegradability at $20^{\circ}C$.

• Applied Chemistry for Engineering
• /
• v.23 no.3
• /
• pp.284-288
• /
• 2012

This work deals with the chemical characterization of glycine aqueous solution in $CO_2$ absorption. Three alkali elements were impregnated into the glycine in order to facilitate the formation of amino functionalities. The analysis by IR revealed the transformation of ammonium ions to the amino group. In addition, the NMR analysis showed that the substitution of metal cations to the chemical shift of hydrogen and carbon atoms in glycine; in order of lithium glycinate, sodium glycinate and potassium glycinate depending on the electro negativity. Meanwhile, the $CO_2$ absorption at room temperature was the highest in primary amine solution, but at the increasing temperature sodium glycinate could capture more $CO_2$ than that of the pure amine solution.

• Journal of the Korean Applied Science and Technology
• /
• v.31 no.1
• /
• pp.143-150
• /
• 2014

Recently, supercritical fluid process has been widely used in material synthesis and processing due to their remarkable properties such as high diffusivity, low viscosity, and low surface tension. Supercritical carbon dioxide is the most attractive solvent owing to their characteristics including non-toxic, non-flammable, chemically inert, and also it has moderate critical temperature and critical pressure. In addition, supercritical carbon dioxide would dissolve many small organic molecules and most polymers. In this study, we have prepared the poly (ethylene oxide)/clay nanocomposites using supercritical fluid as a carbon dioxide. Commercialized Cloisites-15A and Cloisites-30B used in this study, which are modified with quaternary ammonium salts. The nanocomposites of polymer/clay were characterized by XRD, TGA and DSC. Poly (ethylene oxide)/clay nanocomposites by supercritical fluid show higher thermal stability than nanocomposites prepared by melt process. In addition, supercritical fluid process would be increased dispersibility of the nanoclay in the matrix.

• Membrane Journal
• /
• v.25 no.6
• /
• pp.515-523
• /
• 2015

While commercial polystyrene-based ion exchange membranes have simple manufacturing processes, they also possess poor durability due to their brittleness. Poly(ethylene glycol)methyl ether methacrylate with hydrophilic side chains of poly(ethylene glycol) was used as a co-monomer to make the membranes have improved flexibility. Hydrophilicity/hydrophobicity of the anion exchange membranes were able to be adjusted by varying the chain lengths of the poly(ethylene glycol). For the preparation of the anion exchange membranes, a porous PE substrate was immersed into monomer solutions and thermally polymerized. The prepared membranes were subsequently reacted with trimethylamine to produce anion exchange functional groups, Quaternary ammonium salts. The prepared pore-filled anion exchange membranes were evaluated in terms of ion exchange capacity, electric resistance, elongation at break and water uptake.