• Restorative Dentistry and Endodontics
• /
• v.22 no.2
• /
• pp.710-719
• /
• 1997

Aucubin, an iridoid glucoside, which is isolated from Aucuba japonica, has some biological effects. This study was to investigate the effect of aucubin on the remainig pulp tissues after pulpotomy. Mongrel dog's coronal pulps were mechanically exposed with a sterile round bur and excised with sterile sharp excarvator. After bleeding was controlled, in control group, $Ca(OH)_2$ powder was applied on the remaining pulps and the cavities were sealed with Z.O.E. cement. In experimental group 1, mixed powder with $Ca(OH)_2$ and aucubin(l : 1 by weight) was applied on the pulpotomized pulp surfaces. After the cavities were covered with sterile aluminum foil, they were sealed with Z.O.E. cement. In experimental group 2, only aucubin powder was applied on the remaining pulps and then they were treated the same as experimental group 1. In the all groups, the pulps were histopathologically observed by light microscope at the time intervals of 1, 2 and 4 weeks after experiment. The results were as follows : 1. In control and experimental groups, mild vascular congestion and bleeding were found in most of the specimens. Less inflammatory infiltration was observed in experimental groups than in control group. 2. Dentin bridge formation was found after 1 week at both control and experimental group 1. Dentin birdge had discontinuous osteodentin like appearance or contained some dentin chips. In experimental group 2, dentin bridge was not seen. 3. The coagulation necrosis layer on the remaining pulp tissues was seen in all groups. In experimental group 2, the thickest layer was observed. And in control group, coagulation necrosis layer was similar as in experimental group 1.

• Tribology and Lubricants
• /
• v.37 no.4
• /
• pp.125-128
• /
• 2021

A means of enhancing the performance of triboelectric nanogenerators (TENGs) is increasing the differences in work functions between contacting materials. Hexagonal boron nitride (h-BN) exhibits excellent mechanical properties and high chemical stability as well as a high work function. As a result, engineers in the field of energy harvesting have envisioned using h-BN in the electrification layer in TENGs. For the industrial application of h-BN in TENGs, large-scale production is necessary, and h-BN is generally exfoliated and dispersed in various solvents. In this study, we evaluate the performance of a TENG with h-BN nanoflakes in the polyimide (PI) layer. To synthesize a PI composite containing h-BN nanoflakes, h-BN powders are exfoliated and dispersed in poly(amic acid) (PAA), which is the precursor of PI. Then, h-BN dispersion is spin-coated onto the PI film and cured for 2 h under 300℃. This composite material can then be used for the electrification layer in TENGs. Below the electrification layer, an aluminum foil is placed and used as an electrode. When the contact and separation processes with polyethylene terephthalate are repeated, the fabricated TENG shows a maximum power density of 190.8 W/m². This study shows that h-BN is a promising material for enhancing the performance of the electrification layer in TENGs.

• Journal of Convergence for Information Technology
• /
• v.11 no.3
• /
• pp.167-173
• /
• 2021

There is an increasing interest in manufacturing various electronic devices on a bendable substrate. In this paper, we observed a surface morphology by annealing for 20 minutes at temperatures of 150 ℃, 350 ℃, and 550 ℃, respectively, with samples coated by chromium and aluminum. Data on surfaces are investigated using high-resolution SEM and AFM that can measure roughness up to nm. There is no difference from the sample without heat treatment up to 350 ℃, but the change of crystal grains can be observed at 550 ℃. In the future, for application to the flexible optoelectronic field, additional characteristics such as electrical conductivity and reflectivity will be analyzed and optical devices will be manufactured. In conclusion, we will explore the possibility of applying metal materials to flexible electronic devices.

• Current Photovoltaic Research
• /
• v.8 no.4
• /
• pp.107-113
• /
• 2020

Here we report the long-term stability of polymer:nonfullerene solar cells which were stored under dark and indoor light condition. The polymer:nonfullerene solar cells were fabricated using bulk heterojunction (BHJ) layers of poly[(2,6-(4,8-bis(5-(2-ethylhexyl) thiophen-2-yl)-benzo[1,2-b:4,5-b']dithiophene))-alt-(5,5-(1',3'-di-2-thienyl-5',7-bis(2-ethylhexyl)benzo[1',2'-c:4',5'-c']dithiophene-4,8-dione))] (PBDB-T) and 3,9-bis(6-methyl-2-methylene-(3-(1,1-dicyanomethylene)-indanone))-5,5,11,11-tetrakis(4-hexylphenyl)-dithieno[2,3-d:2',3-d']-s-indaceno[1,2-b:5,6-b']dithiophene (IT-M). To investigate their long-term stability, the PBDB-T:IT-M solar cells were stored in an argon-filled glove box. One set of the fabricated solar cells was completely covered with an aluminum foil to prevent any effect of light, whereas another set was exposed to indoor light. The solar cells were subjected to a regular performance measurement for 40 weeks. Results revealed that the PBDB-T:IT-M solar cells underwent a gradual decay in performance irrespective of the storage condition. However, the PBDB-T:IT-M solar cells stored under indoor light condition exhibited relatively lower power conversion efficiency (PCE) than those stored under the dark. The inferior stability of the solar cells under indoor light was explained by the noticeably changed optical absorption spectra and dark spot generation, indicative of degradations in the BHJ layers.

• Journal of the Korean Wood Science and Technology
• /
• v.19 no.1
• /
• pp.31-63
• /
• 1991

It was proved that in conventional kiln drying of disks piling position in the kiln exerted a great influence on drying rates, and the larger the variation of disk diameter, the more undulating drying rates of disks. While in vacuum drying disks there was no influence on drying rates. By the end-wrapping treatments and the radial direction of disks tangential surface stresses in the core of disks were slightly compressive in three species. In control disks the drying stresses distributed into one step-style that compressive stresses in the pith side of 6cm from pith were larger than those in the bark side, while in the disks end-wrapped with Korean paper the drying stresses distributed uniformly, because flow rates of free water in disks had no difference between heart-and sap-wood by obstruction of evaporating water from surface of disks by end-wrapping with Korean paper. And end-wrapping with Korean paper considerably restrained those. Tangential differential shrinkage stresses developed the maximum tensile stress near the bark and with approaching the pith the stresses gradually reduced and changed into compressive stresses in near the pith. At the end of vacuum drying the maximum tangential tensile stresses of disks end-wrapped with Korean paper were smaller than those of control disks, and critical moisture contents causing the V-shaped crack of disks end-wrapped with Korean paper were lower than those of control disks because of the set by obstruction of evaporating water of end-wrapping with Korean paper. In the experiment of vacuum drying stress distribution the disks end-wrapped with Korean paper or aluminum foil in three species were free from V-shaped cracks and control disks were defected very slightly by V-shaped cracks. And also disks end-wrapped with Korean paper were free from heart checks in Alnus japonica and Juglans sinensis, and heart checks were occurred very slightly in others. Especially, not to speak of disks end-wrapped with Korean paper, vacuum drying of disks end-wrapped with aluminum foil prevented effectively drying defects, moreover drying times could be shortened, that is. Ginkgo biloba, Alnus japonica, and Juglans sinensis disks could be dried from green to in-use moisture content in 110 hours, 272 hours, and 407 hours, respectively.

• Journal of the Korean Vacuum Society
• /
• v.15 no.1
• /
• pp.97-102
• /
• 2006

Anodic alumina with self-organized and ordered nano hole arrays can be a good candidate of an irradiation mask to modify the properties of nano-scale region. In order to try using porous anodic alumina as a mask for ion-beam patterning, ion beam transmittance of anodic alumina was tested. 4 Um thick self-standing AAO templates anodized from Al bulk foil with two different aspect ratio, 200:1 and 100:1, were aligned about incident ion beam with finely controllable goniometer. At the best alignment, the transmittance of the AAO with aspect ratio of 200:1 and 100:1 were $10^{-8}\;and\;10^{-4}$, respectively. However transmittance of the thin film AAO with low aspect ratio, 5:1, were remarkably improved to 0.67. The ion beam transmittance of self-standing porous alumina with a thickness larger than $4{\mu}m$ is extremely low owing to high aspect ratio of nano hole and charging effect, even at a precise beam alignment to the direction of nano hole. $SiO_2$ nano dot array was formed by ion irradiation into thin film AAO on $SiO_2$ film. This was confirmed by scanning electron microscopy that the $SiO_2$ nano dot array is similar to AAO hole array.

• Journal of Bio-Environment Control
• /
• v.22 no.4
• /
• pp.322-327
• /
• 2013

This research was conducted to elucidate the appropriate light environment right after grafting to produce vigorous cherry tomato seedlings. Tomato plants were grafted and then treated in 4 different ways: to keep in the natural light (Non), to cover the grafted stem part with aluminum foil to make only that part dark (Part), to put the grafted seedlings in the acclimation room for two (Day-2) or four days (Day-4) to make the whole seedlings in the dark condition. Tube grafting method was used for grafting, in which silicon tube of 1.5mm in diameter was used. The survival rate was the maximum in the treatment Day-2. The SPAD value, seedling quality and yield of $1^{st}$ and $2^{nd}$ cluster were the best in the treatment Part. The treatment Part needs cost more than other treatments but is more economic thanks to higher yield. Therefore it was concluded to be economically feasible to make the grafted stem part dark right after grafting in case of cherry tomato.

• Journal of Sericultural and Entomological Science
• /
• v.51 no.1
• /
• pp.36-40
• /
• 2013

To promote the consumption of mulberry fruit, we manufactured mulberry fruit wine with 'simheung' by different processing methods and analyzed cyanidin-3-glucoside(C3G) stability and antioxidant capacity. In the processing of mulberry fruit alcoholic drink, 3 minutes blanching using microwave inhibited the C3G destruction by maintaining the antioxidant capacity and inactivation of enzymes related to pigment's stability. And freeze-dried mulberry fruit was the highest C3G pigment content and antioxidant capacity. Nevertheless, this is not recommended because the economic burden of the cost of freeze-drying. In conclusion, when processing mulberry fruit wine, the addition of citric acid and the enzyme's inactivation treatment were considered more effective than storage containers (transparent glass, brown glass bottles, aluminum foil, green glass, translucent glass bottles).

• Current Research on Agriculture and Life Sciences
• /
• v.6
• /
• pp.121-127
• /
• 1988

Ramyon(deep fat fried instant noodle with palm oil) preserved in sunlight, room temp. ($20{\pm}5^{\circ}C$), incubator ($30{\pm}2^{\circ}C$) and corrugated fiber board box to investigate the oxidative changes of the Ramyon lipids. In the study, changes in acid value, peroxide value, carbonyl value, TBA value, fatty acid composition, iodine value and panel test were determined with the lipids extracted from the Ramyon samples in intervals for a period of 20 weeks. Acid value, peroxide value, carbonyl value and TBA value of the Ramyon lipid were increased slightly during the storage in aluminum foil package in the corrugated fiber board box in the dark room. They did not appear the oxidative rancid odor at the end of 20 weeks storage. Acid value, peroxide value, carbonyl value and TBA value of the samples under room temp., incubator slightly during storage, while a sharp increase of those values were noticed with the samples of sunlight. Especially, the TBA value of the Ramyon lipid under sunlight markedly increased within 14 weeks and then decreased. Oxidative rancid odor appeared at the end of 10 weeks storage under sunlight, while it took 18 weeks with the sample stored under room temp. and incubator. During the storage under incubator and sunlight for 18 weeks, the content of oleic, linoleic acid decreased, while palmitic and stearic acid increased. However, only small changes were noticed in iodine value of the samples.

• Journal of Astronomy and Space Sciences
• /
• v.31 no.3
• /
• pp.277-283
• /
• 2014

Next Generation Small Satellite-1 (NEXTSat-1) is scheduled to launch in 2017 and Instruments for the Study of Space Storm (ISSS) is planned to be onboard the NEXTSat-1. High Energy Particle Detector (HEPD) is one of the equipment comprising ISSS and the main objective of HEPD is to measure the high energy particles streaming into the Earth radiation belt during the event of a space storm, especially, electrons and protons, to obtain the flux information of those particles. For the design of HEPD, the Geometrical Factor was calculated to be 0.05 to be consistent with the targets of measurement and the structure of telescope with field of view of $33.4^{\circ}$ was designed using this factor. In order to decide the thickness of the detector sensor and the classification of the detection channels, a simulation was performed using GEANT4. Based on the simulation results, two silicon detectors with 1 mm thickness were selected and the aluminum foil of 0.05 mm is placed right in front of the silicon detectors to shield low energy particles. The detection channels are divided into an electron channel and two proton channels based on the measured LET of the particle. If the measured LET is less than 0.8 MeV, the particle belongs to the electron channel, otherwise it belongs to proton channels. HEPD is installed in the direction of $0^{\circ}$, $45^{\circ}$, $90^{\circ}$ against the along-track of a satellite to enable the efficient measurement of high energy particles. HEPD detects electrons with the energy of 0.1 MeV to several MeV and protons with the energy of more than a few MeV. Thus, the study on the dynamic mechanism of these particles in the Earth radiation belt will be performed.