• 열처리공학회지
• /
• 제10권2호
• /
• pp.138-149
• /
• 1997

TiN and AlN are ceramic materials with extensive applications due to its excellent mechanical and chemical properties at elevated temperature. The purpose of this research is to develop the method for the synthesis of ternary nitride powder, titanium-aluminum-nitrogen system, which have an excellent property of both TiN and AlN. The ternary nitride such as $Ti_3AlN$, $Ti_2AlN$ and $Ti_3Al_2N_2$ can be synthesized by the interdiffusion nitriding method in Ar gas, however, the ternary nitride coexist with TiN, AlN, $Ti_3Al$ and ${\alpha}$-Ti. The ternary nitride are stable below $1400^{\circ}C$, but these are gradually decomposed into TiN, $Ti_3Al$ and AlN above $1400^{\circ}C$. The thermal oxidation characteristics of the Ti-Al-N compound synthesized by the interdiffusion nitriding method is superior to that of the TiN+AlN mixed powder, and the oxidation for both materials show the differential behaviors.

• The Korean Journal of Ceramics
• /
• 제3권3호
• /
• pp.187-190
• /
• 1997

The aluminum-magnesium (Al-Mg) aklloys have been proved to be an effective solvent for synthesis of cubic-phase boron nitride (cBN) from hexagonal-phase boron nitride (hBN) at the conditions of high pressures and high temperatures (HP/HT). Various kinds of hBN powders having different crystallinity have been tested for cBN synthesis with Al-Mg solvents. The conversion ratio from hBN to cBN and the shape of synthesized cBN crystals appeared to be affected strongly by chemical composition and added amount of Al-Mg solvents as well as crystallinity of BN powders. As the magnesium content increased in the Al-Mg solvents, the conversion ratio increased and the size of cBN crystals became larger. The crystal facets developed well in the specimens with solvents having high Mg content. It was observed that a hBNlongrightarrowcBN transformation occurred more easily in the specimens having well crystallized hBN powders. Amorphous BN having much $B_2O_3$ impurity exhibited a low threshold temperature for transformation to cBN, which was attributed to crystallization of amorphous BN to well crystallized hBN prior to transformation into cBN with help of $B_2O_3$.

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 2004년도 추계학술발표회 발표논문집
• /
• pp.567-568
• /
• 2004

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2010년도 춘계학술대회 논문집
• /
• pp.509-510
• /
• 2010

• Bulletin of the Korean Chemical Society
• /
• 제14권2호
• /
• pp.163-164
• /
• 1993

• 한국결정성장학회지
• /
• 제23권6호
• /
• pp.279-282
• /
• 2013

최근 관심이 높아지고 있는 GaN, SiC 단결정과 함께 자외선 LED 및 전력 반도체 용 기판 소재로서 응용성이 높은 질화갈륨(AlN, Aluminum Nitride) 단결정을 성장하였다. 아직 상용화된 AlN 기판은 없지만, 단결정 성장에 대한 연구가 이루어지고 있다. 본 연구에서는 국내 최초로 AlN 단결정의 성장 결과 직경 약 8 mm의 결정을 성장하였다. 성장된 단결정은 광학현미경으로 관찰하였으며, DCXRD를 통하여 결정성을 평가한 결과를 보고하고자 한다.

• 한국세라믹학회지
• /
• 제28권6호
• /
• pp.457-464
• /
• 1991

Aluminum nitride (AlN) has excellent properties such as high thermal conductivity and electrical resistivity, whereas it has some disadvantages such as low sinterability and tendency to be hydrolyzed by moisture at room temperature. In the present work, the relative density, modulus of rupture and microhardness were examined for pressure-less-sintered AlN (synthetic and commercial) bodies which were prepared under the conditions of various sintering temperatures, holding times and additions of CaCO3 which showed the best effect on sinterability among the various sintering aids. As a result, the AlN bodies with 1.0 wt% CaCO3 (0.56wt% CaO) which were sintered at 1800$^{\circ}C$ for 20 min showed good densification. In this case, the relative densities were 95.9% and 95.2%, and microhardnesses were 10.3 GPa and 9.8 GPa for synthetic and commercial AlN respectively. And as the holding time at 1800$^{\circ}C$ was increased from 10 min to 60 min, the relative density was increased from 91.9% to 96.5%. It was considered that impurities of metals and oxygen promoted the densification of AlN at low temperature (1600$^{\circ}C$).

• 한국전자파학회논문지
• /
• 제19권2호
• /
• pp.257-262
• /
• 2008

본 논문에서는 열전도도가 우수한 AIN 기판에 $CO_2$ Laser 장비 를 이용하여 Thru-hole과 scribing line을 형성하기 위해 $CO_2$ laser의 파라미터(촛점 거리, 공기량, 레이저 빔 시간, 펄스 개수)를 실험하고, 자체 정렬 마스킹 기법을 이용한 5 um 두께의 Cu 도금으로 AIN 기판에 전송 선로와 나선형 평면 인덕터를 제작하였다. AIN 기판에서의 마이크로스트립 라인의 전송 손실은 10 GHz에서 0.1 dB/mm, 6 nH 나선형 평면 인덕터는 1 GHz에서 56의 품질 계수를 얻었고, 이를 통해 열전도도가 우수한 AIN 기판의 고전력 RF 응용이 가능할 것으로 기대한다.

• 공업화학
• /
• 제29권4호
• /
• pp.484-487
• /
• 2018

본 논문에서는 유기전자소자에서 사용되는 수분 차단막의 투습도 분석을 위하여 ytterbium의 광학적 전기적 특성을 연구하였다. Ytterbium 박막은 다양한 성막 두께(20-100 nm)에 따라 넓은 범위의 광투과도(70-10%)와 비저항($6.0-0.16m{\Omega}{\cdot}cm$) 값을 나타내었다. 25 nm의 ytterbium 박막은 수분과 반응하여 산화되며 투과도와 저항이 실시간으로 변화하였고 이를 통해 parylene 고분자와 aluminum nitride 적층형 박막 봉지 필름을 분석한 결과 $4.3{\times}10^{-3}g/m^2{\cdot}day$의 투습도를 측정할 수 있었다.

• 센서학회지
• /
• 제16권6호
• /
• pp.462-466
• /
• 2007

Aluminum nitride (AlN) thin films were deposited on Si substrates by using polycrystalline (poly) 3C-SiC buffer layers, in which the AlN film was grown by pulsed reactive magnetron sputtering. Characteristics of grown AlN films were investigated experimentally by means of FE-SEM, X-ray diffraction, and FT-IR, respectively. The columnar structure of AlN thin films was observed by FE-SEM. X-ray diffraction pattern proved that the grown AlN film on 3C-SiC layers had highly (002) orientation with low value of FWHM (${\Theta}=1.3^{\circ}$) in the rocking curve around (002) reflections. These results were shown that almost free residual stress existed in the grown AlN film on 3C-SiC buffer layers from the infrared absorbance spectrum. Therefore, the presented results showed that AlN thin films grown on 3C-SiC buffer layers can be used for various piezoelectric fields and M/NEMS applications.