• 한국구조물진단유지관리공학회 논문집
• /
• 제16권1호
• /
• pp.110-119
• /
• 2012

최근 고부식 환경에 놓여 있는 철근 콘크리트 구조물의 철근 부식 문제를 해결할 수 있는 방안 중 하나로 뛰어난 내부식성을 가진 섬유복합체(Fiber Reinforced Polymer, FRP)로 제작된 보강근이 주목받고 있다. 유리섬유복합체로 제작된 보강근이 상용화된 상태이나 가격, 철근보다 낮은 탄성계수, 취성파괴 특성 등의 이유로 사용 실적은 많지 않은 것이 현실이다. 이러한 문제점을 해결하기 위한 방편 중 하나는 유리섬유복합체 보강근의 성능을 고도화하는 것이다. 성능 고도화를 통해 강도 대비 가격을 낮출 수 있으며, 인장성능을 향상시킬 수 있다. 본 연구는 주어진 재료와 조건 하에서 보강근 성능에 영향을 미치는 인자들의 효율성 향상을 통한 고인장 성능 유리섬유복합체 보강근의 개발에 관한 것이다. 이를 위해 구성재료와 제작방법 등 유리섬유복합체 보강근의 인장성능에 영향을 미치는 인자들에 대해 분석을 수행하여 개선 방안을 제안하였으며, 이를 통해 보강근의 주재료인 유리섬유의 성능을 기존 제품보다 더욱 효율적으로 활용하는 보강근을 제작하였으며, 다양한 변수에 대한 인장시험을 통하여 그 성능을 비교 분석함으로써 개선 방안의 적절성을 검증하였다.

• Journal of the Korean Statistical Society
• /
• 제36권2호
• /
• pp.201-208
• /
• 2007

Evolutionary operation (EVOP) proposed by Box (1957) is a method for continuous monitoring and improvement of a full-scale manufacturing process with the objective of moving the operating conditions toward the better ones. EVOP consists of systematically making small changes in the levels of the two or three process variables under consideration. Data are collected on the response variable at each point of two level factorial design with the center point and a cycle is said to have been completed. The cycles are replicated sequentially until the decision is made on whether further cycle of experiments is needed to conclude the significance of any of main effects or interaction effects or the curvature. In this paper, an improved flow chart of EVOP is proposed and how to determine the number of cycles is studied based on the size of type II error. In order to reject the alternative hypothesis of interests with more confidence and conclude that we believe in the null hypothesis of no effects, we propose a counter measure $p^*-value$ corresponding to the p-value. The relationship of $p^*-value$ to the probability of type II error ${\beta}$ under the alternative hypothesis of interests is analogous to that of p-value to the probability of type I error ${\alpha}$. Also the implementation of EVOP with a mixture experiment is discussed.

• 시스템엔지니어링학술지
• /
• 제8권2호
• /
• pp.1-10
• /
• 2012

This paper aims to analyze the result of SE Process Implementation on Light Rail Transit(LRT) Project. Currently the Light Rail Transit Project of Korea applies SE to the intermediate phase, that is, E&M phase which is a manufacturing and designing procedure. More seriously, the application effect of SE is not remarkable because it applies to some specific engineering fields like RAMS and it depends on superficial consulting of foreign companies with low SE support capability and investment capital. This study points out that the "Requirement Analysis" and "System Alternative Review" has not been conducted from the initial phase (basic plan and basic design) of the LRT projects. Several projects indicate that the amount of investments for SE activities through the Korea LRT project is relatively very small in comparison with the global capital which is about 10% of total project budget. Furthermore, Korea LRT projects have very few SE professionals and weak SE organization with no government directions and guide book for the efficient implementation of SE for the LRT projects.

• 한국인구학
• /
• 제27권1호
• /
• pp.121-146
• /
• 2004

한국의 중소 제조업 노동력 부족 실태는 노동부의 <노동력수요동향조사>와 중소기업청의 <중소기업인력실태조사> 결과를 통해 파악할 수 있다. 그러나 이 두 기관에서 조사한 자료의 개념과 측정도구의 불일치가 매우 심해 인력부족실태를 정확히 파악하는 데 심각한 어려움이 있다. 본 연구는 한국의 '인력부족'의 개념 정의와 측정 및 조사방법에서 혼란이 발생하고 있음을 밝혀낸 후, 대안적인 통계 지표들을 제시하여 그 혼동을 최소화할 수 있는 방안을 제시하고 있다.

• 한국정보시스템학회지:정보시스템연구
• /
• 제17권4호
• /
• pp.301-319
• /
• 2008

The display market has been replaced by the FPD (Flat Panel Display) from the CRT (Cathode-Ray Tube) since the late 1990s. In the FPD production line, the most equipment has high price. Thus, when the equipment has multi-function, the repetitive process is arranged for the equipment. However, such disposition of equipment results in more complicated process flow owing to repetitive operations. This reduces the production capacity and increases lead-time in turn. In this paper, we develop an AutoMod simulation system that derives to information about the quantity, production lead-time, utilities of facilities, and occupation rates of racks. In this simulation system, we consider the situation where the equipment might be broken and suspended randomly. For the developed system, we first evaluate a production plan with current layout and then, propose a revised alternative plan. Using the same simulation scheme, we investigate comparing the production quantity and lead-time with the two plans. In addition, for a proposed alternative, we try to forecast the most adequate rule between the two job dispatching rules which are FOR (Fewest Operation Remaining) and FCFS (First Come First Serve) through simulation.

• 품질경영학회지
• /
• 제41권2호
• /
• pp.249-260
• /
• 2013

Purpose: The main objective of this paper is to propose an RD method by developing a neural network (NN)-based estimation approach in order to provide an alternative aspect of response surface methodology (RSM). Methods: A specific modeling procedure for integrating NN principles into response function estimations is identified in order to estimate functional relationships between input factors and output responses. Finally, a comparative study based on simulation is performed as verification purposes. Results: This simulation study demonstrates that the proposed NN-based RD method provides better optimal solutions than RSM. Conclusion: The proposed NN-based RD approach can be a potential alternative method to utilize many RD problems in competitive manufacturing nowadays.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제20권3호
• /
• pp.1-6
• /
• 2015

The rapid industrial development is facing problem due to energy depletion in Korea. So that, it can be necessary to develop alternative energy sources. Alternative energy like biofuels can be produced by using waste fuel, which is ecofriendly. As we know, the organic waste was banned to dump in landfill and ocean dumping. The most practicable method usually used to reduce organic waste is getting feedstuff or composting, considering the discharge characteristics of agricultural by-products waste treatment were selected. In this study, bio-coal was made using agriculture by product. Biocoal was prepared by adding 50 g of uniformly mixture into reactor and was carbonized at low temperatures 210, 220, and 230℃. The time of reaction was 1, 2 and 3 hours. Bio-coal approximately was similar to the standard of solid fuels. Other characteristics of fuel were also studied. The experiments which were analyzed were moisture content and calorific value, ash, chlorine, sulfur and heavy metals analysis as mercury, cadmium, lead, arsenic, and chromium. As a result, bio-coal 220℃, 2 hours was the optimal conditions while heating.

• 청정기술
• /
• 제5권2호
• /
• pp.1-12
• /
• 1999

세정공정은 여러 산업체의 생산공정에 활용되고 있는 공정으로서 세정과정중 다양한 환경 오염물질을 배출하고 있다. 따라서, 환경 및 안전규제가 국내외적으로 엄격하여짐에 따라 기존의 세정공정에서 사용되었던 세정제를 환경문제나 유해성 문제를 야기시키지 않는 환경친화적인 세정제로 대체하는 것이 절실한 실정이다. 대체세정제를 선정하기 위해서 기존의 세정제에 필적할 만한 세정성을 갖춰야 하지만 세정성 평가방법이 정립되어 있지 않은 실정이다. 따라서 본 연구에서는 실험실이나 산업체에서 활용 가능한 여러 가지 세정평가법을 정리하여 보았고 국내외 현장 적용사례를 조사 분석하였다.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제39권
• /
• pp.33.1-33.10
• /
• 2017

Dental implants are a common treatment for the loss of teeth. This paper summarizes current knowledge on implant surfaces, immediate loading versus conventional loading, short implants, sinus lifting, and custom implants using three-dimensional printing. Most of the implant surface modifications showed good osseointegration results. Regarding biomolecular coatings, which have been recently developed and studied, good results were observed in animal experiments. Immediate loading had similar clinical outcomes compared to conventional loading and can be used as a successful treatment because it has the advantage of reducing treatment times and providing early function and aesthetics. Short implants showed similar clinical outcomes compared to standard implants. A variety of sinus augmentation techniques, grafting materials, and alternative techniques, such as tilted implants, zygomatic implants, and short implants, can be used. With the development of new technologies in three-dimension and computer-aided design/computer-aided manufacturing (CAD/CAM) customized implants can be used as an alternative to conventional implant designs. However, there are limitations due to the lack of long-term studies or clinical studies. A long-term clinical trial and a more predictive study are needed.

• 한국국방경영분석학회지
• /
• 제28권1호
• /
• pp.17-28
• /
• 2002

Recently, To define an enterprise's survival strategy is a difficult task, because the competition of a business is a complexity. The reason is the original research uses a statistical survey method. On a conceptual point of SCM, - as an order of development, physical distribution, logistics management, basic supply chain management and advanced supply chain management etc - a supervisor is magnifying gradually as well as confusing with information and analysis techniques which seems possible. On executing this, however, it has many problems since it is hard and wide; therefore, The Manager don't aware a total executable solution even though the enterprise knows necessity of SCM. On this paper focus on a proposal of alternatives with reasonableness of manufacturing and making a profit of sales department like most of enterprises are willing to overcome such as carelessness and unready strategy of investment additionally, the thesis should effort to find an element through an analysis of cases, a statistical method of effective SCM, and actual survey to propose an alternative; moreover, this paper proved the facts that it could be a guiding company, which has an ability of cooperation with entities through the founding of supply chain. As a conclusion, this essay showed the variation that influences the capacity entities and alternative to define an element which basically influence for a cause and effect.