• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1999.05a
• /
• pp.489-492
• /
• 1999

The effects of alternate bias stress on p-channel poly-Si TPT's has been systematically investigated. It has been shown that the application of alternate bias stress affects device degradation for the negative bias stress as well as device improvement for the positive bias stress. This effects have been related to the hot carrier injection into the gate oxide rather than the generation of defect states within the poly-Si/SiO$_2$ under bias stress.

• Research in Plant Disease
• /
• v.14 no.2
• /
• pp.102-106
• /
• 2008

The single application of Bacillus subtilis QST713(BS QST713) mixed application with fungicides and alternate application were treated to examine the control of alternaria leaf blight of Panax ginseng. Control value of alternaria leaf blight by single application of BS QST713 at 10 days interval was 83.3%, and those of single application at 10 days interval was $80.4{\sim}83.7%$ by azoxystrobin, chlorothalonil copper sulfate basic, copper sulfate basic, kresoxim-methyl, difenoconazole, mancozeb. When mixture of BS QST713 and fungicides were applied at 14 days interval, the control value of alternaria leaf blight were 83.6% by BS QST713 and mancozeb, and 82.6% by BS QST713 and azoxystrobin. However, mixture of BS QST713 with difenoconazole, kresoxim-methyl, copper sulfate basic and chlorothalonil copper sulfate basic exhibited the disease control values from 61.1% to 76.4%, which showed slightly lower control efficacy. In Daejeon, the alternate application of BS QST713 followed by copper sulfate basic with 14 days interval was 85.9% in control value, which showed the best control efficacy. The alternate application with other tested fungicides slightly decreased to $55.5{\sim}78.2%$ in control value. However, the alternate application of BS QST713 followed by fungicides showed very high control efficacy, which were approximately 90% in Muju, Jeonbuk Province. Consequently, the single, mixed or alternate application of BS QST713 and fungicides could be recommended as a control method to reduce the amount of fungicides.

• Research in Plant Disease
• /
• v.15 no.1
• /
• pp.17-22
• /
• 2009

To reduce the amount of chemical fungicides and the number of spray for the control of Alternaria blight of ginseng, biofungicides were used in order to reduce the residue and ensure the safety of ginseng plants. The control efficiencies were 68.34%$\sim$73.56% against Alternaria blight in 2 times alternate spray of biofungicides and chemical fungicide at 14 days interval whereas the control efficiencies were 87.00%$\sim$89.42% in 2 times alternate spray of 3 different kinds of chemical fungicides at 14 days interval. In case of treatment combination the control efficiencies were 74.53%$\sim$87.23% in alternate spray of mixture of biofungicides and chemical fungicides at 28 days interval in all combinations except 2 kinds of combinations (Com-12 and Com-17). Therefore, the alternate application of the biofungicides and chemical fungicides or alternate application of mixture of biofungicides and chemical fungicides could reduce the amount of chemical fungicide about 75.00%$\sim$83.33%.

• Korean Journal of Environmental Agriculture
• /
• v.32 no.4
• /
• pp.343-347
• /
• 2013

BACKGROUND: Control of alternate bearing satsuma mandarin in Jeju is very important to maintain the optimum price of fruit and get the sustainable income of farmers. Unlike orange, Satsuma mandarin is well known to sensitive on alternate bearing. We carried out the experiment to know the effect of foliar application of $GA_3$ on the flowering and fruit quality of satsuma mandarin (C. unshiu Marc. cv. Miyagawa). METHODS AND RESULTS: To experiment, the treatments consist of control, different concentration of $GA_3$ (25, 50 and 100 mg/L), machine oil emulsion 100 times and mixture of various concentration of $GA_3$ (25 and 50 mg/L) with machine oil emulsion 100 times which it was applied on 15 year-old Miyagawa satsuma mandarin at December 29, 2011. Foliar application of $GA_3$ in winter reduced the flowering of satsuma mandarin. Flower-leaf ratio was significantly reduced at 100 mg/L $GA_3$, while no differences observed in low concentration of $GA_3$ (25 and 50 mg/L). However, it was significantly decreased to 0.19 in application of $GA_3$ 25 and 50 mg/L with machine oil emulsion 100 times mixture. Number of leaves per fruit was significantly increased as foliar application of $GA_3$ also it reduced the fruits remarkably. Soluble solid contents and Hunter's a of peel color ratio showed no difference among $GA_3$ single treatments, but it was reduced in $GA_3$ 25 and 50 mg/L with machine oil emulsion 100 times mixtures significantly. From the results, it has been found that higher $GA_3$ concentration can reduce the number of flowers on the alternate bearing of satsuma mandarin. However, it was found that lower concentration of $GA_3$ with machine oil emulsion mixture 100 times can reduce flowering. CONCLUSION(S): The foliar application of $GA_3$ (100 mg/L) can alleviate alternate beraring. Also, mixture of lower concentration of $GA_3$ with machine oil emulsion 100 times can retard flowering more significantly while it needs further confirmation.

• Korean Journal of Soil Science and Fertilizer
• /
• v.47 no.6
• /
• pp.480-485
• /
• 2014

In satsuma mandarin (C. unshiu Marc. cv. Miyagawa), alternate bearing is frequently occurred. It is very difficult to control and maintain the optimum production because satsuma mandarin is a very sensitive citrus cultivar. We carried out the experiment to find out the effects of foliar application of gibberellic acid ($GA_3$) and machine oil emulsion mixture on flowering and fruit quality of satsuma mandarin grown on open field. The treatments were composed of control (no application), $GA_3$ (25, 50 and $100mg{\cdot}L^{-1}$), machine oil emulsion 100 times and mixture of $GA_3$ (25 and $50mg{\cdot}L^{-1}$) with machine oil emulsion 100 times on 16 year-old 'Miyagawa' satsuma mandarin on December 30, 2012. Foliar application of $GA_3$ during winter season led to a reduction of the flowering in the following year. $GA_3$ decreased flowering in dose dependant manner. However, application of $GA_3$ and machine oil emulsion (100 times-diluted mixture) inhibited effectively the flowering compared to $GA_3$ only. Also, flower-leaf ratio was significantly decreased by the application of $GA_3$ 25 (0.54) and $50(0.41)mg{\cdot}L^{-1}$ with machine oil emulsion mixture in comparison to $GA_3$ 25 (0.86) and $50(0.60)mg{\cdot}L^{-1}$ only. The number of leaves per fruit increased in application of $GA_3$ and machine oil emulsion mixture as concentration of $GA_3$ increased. Fruit weight and sugar-acid ratio also increased in comparison to the control whereas fruit size, soluble solid content and acidity remained unchanged. From the results, it was suggested that $GA_3$ application can reduce the number of flowers on the alternate bearing of satsuma mandarin. Moreover, application of $GA_3$ (25 and $50mg{\cdot}L^{-1}$) with machine oil emulsion 100 times mixture can reduce the flowering effectively without altering fruit maturity and soluble solid contents. Therefore, it can be concluded that the application of $GA_3$ 25 and $50mg{\cdot}L^{-1}$ with machine oil emulsion 100 times might be useful in controlling alternate bearing in satsuma mandarin.

• Journal of international Conference on Electrical Machines and Systems
• /
• v.2 no.3
• /
• pp.269-274
• /
• 2013

Fault-tolerant capability, wide speed range and overload capability are required in electric motors used in electric vehicles. In this paper, based on the analysis of the all poles wound and alternate poles wound flux-switching permanent-magnet machines, an optimization method is studied to reduce torque ripple. The method takes account of both flux-leakage and cogging torque. The simulation result shows that the method can reduce the torque ripple effectively. This study lays the foundation for the further application of FSPM in electric vehicles.

• Proceedings of the Korea Contents Association Conference
• /
• 2004.11a
• /
• pp.327-332
• /
• 2004

USB(Universal Serial Bus) is one of the most popular communication interfaces. When USB is used in an extended range, especially configurating In-home network by connecting multiple digital devices each other, USB interface uses the bandwidth in the way of TDM(Time Division Multiplexing) so that the bottleneck of bus bandwidth can be brought. In this paper, the more effective usage of bus bandwidth to overcome this situation is introduced. Basically, in order to realize the system for transferring realtime moving picture data among digital information devices, we analyze USB transfer types and Descriptors and introduce the method to upgrade detailed performance of Isochronous transfer that is one of USB transfer types. In the case that Configuration descriptor of a device has Interface descriptor that has two AlternateSetting, if Isochronous transfers are not processed smoothly due to excessive bus traffic, the application of the device changes AlternateSetting of the Interface descriptor and requires a new configuration by SetInterface() request. As a result of this adaptive configuration, the least data frame rate is guaranteed to a device that the sufficient bandwidth is not alloted. And if the bus traffic is normal, the algorithm to return to the original AlteranteSetting is introduced. this introduced method resolve the bottleneck of moving picture transfer that can occur in home network connected by multiple digital devices.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.5
• /
• pp.929-934
• /
• 2009

In this work, the punchless piercing process with application of alternate high pressure has been proposed as a method to obtain pierced holes having nearly vertical wall over thin metal plates. The numerical simulation considering Lemaitre damage model has been accomplished for the proposed method. The simulated results have been compared with those by conventional one-way punch less piercing process. It has been revealed that the fractured section made by pressure alternation method shows nearly steep wall where the deviation angle from the vertical line is as small as $3.6^{\circ}$.

• Imaging Science in Dentistry
• /
• v.41 no.3
• /
• pp.95-100
• /
• 2011

Purpose : The purpose of this study was to compare asymmetric mandibular prognathism individuals with symmetric mandibular prognathism individuals using a new alternate spherical coordinate system. Materials and Methods : This study consisted of 47 computed tomographic images of patients with mandibular prognathism. The patients were classified into symmetric and asymmetric groups. Mandibular and ramal lines were analyzed using an alternate spherical coordinate system. The length as well as midsagittal and coronal inclination angle of the lines was obtained. The bilateral differences of the spherical coordinates of the facial lines were statistically analyzed in the groups. Results : There were significant differences between the groups in bilateral difference of the length and midsagittal inclination angle of the lines (p<0.05). The bilateral difference of the length and midsagittal inclination angle of the lines has significant correlation with chin deviation (p<0.05). Conclusion : The new alternate spherical coordinate system was able to effectively evaluate facial lines. The bilateral difference of lengths and midsagittal inclination of the facial lines might contribute to the facial asymmetry in mandibular prognathism individuals.

• The Korean Journal of Pesticide Science
• /
• v.19 no.4
• /
• pp.428-439
• /
• 2015

Pepper anthracnose caused by Collectotrichum acutaum has been known as one of the most damaging diseases of pepper, which has reduced not only yield but also quality of pepper produce almost every year. This study was conducted to develop control strategy against pepper anthracnose by alternate application of agricultural organic materials and chemical fungicides. The alternate application effect of agricultural organic materials and chemical fungicides for controlling pepper anthracnose were examined in vitro and in the field. First, thirteen microbial agents and twenty two agricultural organic materials were screened for antifungal activity against C. acutatum through the dual culture method and bioassay. As a result, one microbial agent (Bacillus subtilis QST-713) and three agricultural organic materials (sulfur, bordeaux mixture, marine algae extracts) were found to show high inhibition effect against C. acutatum. In the field test, when Iminoctadine tris+thiram, a chemical fungicide for controlling pepper anthracnose, was sprayed, it reduced disease incidence by 89.5%. Meanwhile Sulfur, bordeaux mixture, copper, marine algae extracts and Bacillus subtilis QST-713 showed low disease incidence at the range of 33.1~81.0%. However, when Iminoctadine tris+thiram and agricultural organic materials(bordeaux mixture, marine algae extracts) were applied to pepper fruits alternately two times at 7 days interval, there was a 81.7 and 87.1% reduction in disease, respectively. Consequently, the alternate spray of chemical fungicide (Iminoctadine tris+thiram) and agricultural organic materials (bordeaux mixture, marine algae extracts) could be recommended as a control method to reduce the using amount of chemical fungicide.