• Journal of the Korean Ceramic Society
• /
• v.28 no.3
• /
• pp.189-196
• /
• 1991

Si(OC2H5)4, commercial AlN and Y2O3 powder were used as the precusor of Si3N4, AlN, Y2O3, respectively. After Si3N4 powder was synthesized by carbothermal reduction and nitridation at 135$0^{\circ}C$ for 13h in N2 atmosphere, characteristics of synthesized powder and the ceramics sintered at 178$0^{\circ}C$ for 1h under 30MPa were investigated. In order to evaluate the reliability of sintered body, Weibull modulus was investigated. Premixing of carbon black as a reduction agent had no effect on Si(OH)4 formation, and Si3N4 powder synthesized from Si(OC2H5)4 was $\alpha$-Si3N4 single phase. Mechanical properties of sintered body were measured as follows : flexural strength ; 750MPa, fracture toughness ; 3.71Mn/3/2, hardness : 17.4GPa, thermal shock resistence temperature ; $600^{\circ}C$. Flexural strength at room temperature was 750MPa and was retained up to 110$0^{\circ}C$. The Weibull modulus of sintered body was 10.7.

• BMB Reports
• /
• v.47 no.7
• /
• pp.382-387
• /
• 2014

Corn silk (CS) has long been consumed as a traditional herb in Korea. Maysin is a major flavonoid of CS. The effects of maysin on macrophage activation were evaluated, using the murine macrophage RAW 264.7 cells. Maysin was isolated from CS by methanol extraction, and preparative $C_{18}$ reverse phase column chromatography. Maysin was nontoxic up to $100{\mu}g/ml$, and dose-dependently increased TNF-${\alpha}$ secretion and iNOS production by 11.2- and 4.2-fold, respectively, compared to untreated control. The activation and subsequent nuclear translocation of NF-${\kappa}B$ was substantially enhanced upon treatment with maysin ($1-100{\mu}g/ml$). Maysin also stimulated the phosphorylation of Akt and MAPKs (ERK, JNK). These results indicated that maysin activates macrophages to secrete TNF-${\alpha}$ and induce iNOS expression, via the activation of the Akt, NF-${\kappa}B$ and MAPKs signaling pathways. These results suggest for the first time that maysin can be a new immunomodulator, enhancing the early innate immunity.

• Transactions on Electrical and Electronic Materials
• /
• v.18 no.4
• /
• pp.211-216
• /
• 2017

The dielectric properties of two polyurethanes (PUs) with different hard segments, i.e., aromatic methylene di-p-phenyl diisocyanate (MDI) and aliphatic hexamethylene diisocyanate (HDI), were investigated in the temperature range of -100 to $100^{\circ}C$ and in the frequency range of 1 Hz to 3 kHz. The ${\alpha}$-relaxations induced by the glass transition of the equivalent soft segments in the two PUs occurred at relaxation times of ${\tau}=3.46{\times}10^{-3}s$ for MDI-PU and ${\tau}=3.39{\times}10^{-2}s$ for HDI-PU at $-20^{\circ}C$, in accord with the temperature-frequency superposition principle, resulting in similar shifting factors. However, different I-relaxations were observed for the two PUs. The I-relaxation of MDI-PU occurred due to the mobility of the chain extenders near $80^{\circ}C$ with a slower shifting rate than the ${\alpha}$-relaxation. On the other hand, I-relaxation arising from both the extender and the unconstrained hard segments of HDI-PU occurred at $70{\sim}100^{\circ}C$, indicating complicated dielectric behavior due to partial interaction with the ${\alpha}$-relaxation at high frequencies. Thus, the I-relaxation of HDI-PU did not follow the superposition principle. The dielectric behaviors of the PUs were mainly influenced by their phase transitions, which were affected by the structure and components of the materials.

• Resources Recycling
• /
• v.28 no.1
• /
• pp.15-22
• /
• 2019

There are three hydrometallurgical methods by which pure alumina can be prepared, such as hydrolysis of aluminum alkoxides, thermal decomposition of ammonium alum and thermal cracking of ammonium aluminum carbonate (AACH). The effect of solution pH and temperature and the nature of the impurities on the phase transition and the purity of the alumina thus produced was investigated. Hydrolysis of aluminum alkoxides and thermal decomposition of ammonium alum produce ${\alpha}$ and ${\gamma}$ alumina, while only ${\alpha}$ alumina can be produced by thermal cracking of AACH.

• Journal of Power Electronics
• /
• v.19 no.2
• /
• pp.487-496
• /
• 2019

For a solid-state transformer (SST), some factors, such as signal delay, switching loss and differences in the system parameters, lead to unbalanced DC-link voltages among the cascaded H-bridges (CHB). With a control method implemented in the ${\alpha}{\beta}$ frame, the DC-link voltages are balanced, and the reactive power is equally distributed among all of the H-bridges. Based on the ${\alpha}{\beta}$ frame control, the system can achieve independent active current and reactive current control. In addition, the control method of the high-voltage stage is easy to implement without decoupling or a phase-locked loop. Furthermore, the method can eliminate additional current delays during transients and get the dynamic response rapidly without an imaginary current component. In order to carry out the controller design, the vector refactoring relations that are used to balance DC-link voltages are derived. Different strategies are discussed and simulated under the unbalanced load condition. Finally, a three-cell CHB rectifier is constructed to conduct further research, and the steady and transient experimental results verify the effectiveness and correctness of the proposed method.

• Journal of the Korean Ceramic Society
• /
• v.25 no.4
• /
• pp.415-423
• /
• 1988

Mixtures of carbon and silica (about 0.46${\mu}{\textrm}{m}$) which was synthesized by the hydrolysis of ethyl silicate, the molar ratio of silica/carbon was fixed as 1/10(weight ratio : 1/2), were nitrided in the temperature range 135$0^{\circ}C$~150$0^{\circ}C$. The phse of the product Si3N4 was $\alpha$ phase and the morphology was hexagnoal prism and the nitridation reaction was completed in 5 hrs at 150$0^{\circ}C$ or 7hrs at 145$0^{\circ}C$. The reaction rate above 150$0^{\circ}C$ was diffusion-controlled, following Jander equation. Activation energy Q was derived from the Arrhenius plot and the value was about 101kcal/mol. Axis ratio of Lattice constants(c/a) was 0.726 and unit volume was $\AA$3, the larger the molar ratio of carbon/Alkoxide was, the smaller the particle size of $\alpha$Si3N4 was.

• Korean Journal of Remote Sensing
• /
• v.28 no.3
• /
• pp.329-336
• /
• 2012

This paper give further assessment on the original DoP-CPD classification scheme. This paper provides some additional comparative study on the DoP-CPD with H/A/alpha classifier in terms of multi look effects and classification performances. The statistics and multi looking effects of the DoP and CPD were analyzed with measured polarimetric SAR data. DoP-CPD is less sensitive to the number of averaging pixels than the entropy-alpha technique. A DoP-CPD diagram with appropriate boundaries between six different classes was then developed based on the data analysis. A polarimetric SAR image DoP-CPD classification technique is verified with C-band polarimetric RADARSAT-2 images.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 1999.03a
• /
• pp.149-152
• /
• 1999

The effect of initial orientation on the microstructure and texture evolution of two ferritic stainless steels was investigated. the columnar and equiaxed crystal specimens which were prepared from continuous casting slab were hot rolled annealed cold rolled and annealed respectively. The rolling and recrystallization textures at each process stage were examined by orientation distribution function (ODF) and electron back-scattered diffraction (EBSD); The observation showed that the orientation density of the $\alpha$-fibre of hot rolled band of columnar crystal specimen was more pronounced than that of the equaxed one at the center layer. Nevertheless the cold rolled textures of Type 430 steel have demonstrated a rather similar development . Compared to Type 430 steel the development of the $\alpha$-fibre in the center layer of Type 409L steel was much more pronounced. The relation between texture evolution and ridging behaviour has been discussed.

• Korean Journal of Pharmacognosy
• /
• v.21 no.2
• /
• pp.148-152
• /
• 1990

Seven flavonol glycosides from the EtOAc fraction of Ginkgo biloba leaves were identified by high performance liquid chromatography. Separation by reversed phase chromatography on $Lichrosorb^{\circledR}$ RP-18 column was achieved by isocratic elution. The content of the major acylated flavonol glycoside, kaempferol 3-0-[$6'-O-{p}-coumaroyl-{\beta}-_D-glucosyl(1{\rightarrow}2)-{\alpha}-_L-rhamnoside$] was about 8.0% and 0.55% for EtOAc fraction and MeOH extract, respectively.

• Journal of Powder Materials
• /
• v.9 no.5
• /
• pp.336-340
• /
• 2002

The $\alpha$-zirconium phosphate particles as fine as 20 nm were fabricated through solution technique using $ZrOCl_2{\cdot}8H_2O$ and $H_3PO_4$ as precursors. Stability of $\alpha$-Zirconium phosphate could be ensured by adding excess phosphoric acid to a stoichiometric composition Instead of using reflux route that resulted in coarsening of particles due to an inevitably long aging. The excess phosphorous incorporated in the crystal could be successfully eliminated afterwards through careful washing. Moreover, heavily agglomerated particles are observed before washing, but fairly dispersed state is found out after washing treatment. Thus, it is found that dispersed state as well as phase stability is ensured through proper washing treatment.